Does anyone know why my voltage is sticky? Here's what's happening:
Latest Bios for my Maximus Impact.
Started from default settings then did the following:
CSM support off, Fast boot enabled, Rapid Start enabled, CPU Fan set to Ignore.
Multi Core enhancement Off, Sync All Cores at 45x, turn off EIST and disable C States, set vcore to 1.258XX or something, Ring min and max set to 36x, ring voltage is on Auto.
Here's the problem, my vcore does not get set to whatever I set it to in the Bios, depending on how low or high I go, it jumps from 1.248 to 1.264, to 1.280, to 1.296. So if I set it somewhere in between, it will simply go to one of these Vcores depending on what my chosen number is closest to. This is reflected in the BIOS and within Windows.
Is this normal operation for Z87 or Haswell?
Bookmarks