Post your result here
Post your result here
Last edited by Dumo; 04-02-2014 at 08:28 AM.
I'm looking forward to seeing your tests!
![](http://www.hwbot.org/signature/u15466.png height="110" )
Originally Posted by chew*
+1
Give a spank to this platinum stuff
I need to get my hands on 2 of those OC cards.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
^^SLI powa
Mine so far benching @ 1350/2000 on stock air hsf
Curious, what is your ASIC?
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
lucky boys!
Asic 74
Got the red ones to too
XCB with connector to gpu
Last edited by Dumo; 04-03-2014 at 05:20 PM.
1350 @ 1.18V? That is pretty good. How high can you take the voltage via software?
Same limit via GPUTweak or Xtreme control board
Standard mode
VGPU 1.2V
VMEM 1.65V
VPLL 1.1V
LN2 mode
VGPU 1.8V
VMEM 2.2V
VPLL 1.4V
Is that with just the LN2 bios or by shorting the LN2 jumper/pads?
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
the switch to LN2 bios wont take effect without shorting LN2 pads
this is to ensure it remains in standard BIOS if switch in wrong position by accident from factory as well as to those who know what they are doing to use LN2 Mode
Crazy cards those Matrix, awaiting LN2 results!
Testing air stock
Last edited by Dumo; 04-06-2014 at 09:27 PM.
Crazy card Dumo, if scale with V and LN2, u will get a massive score son!
Nice I really like those overclock cards do they come with retail cards
_________________
You might have a gem there Dumo, mine is capping out around 1225/7700 with similar power settings.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
Universal blocks and hard bridge arrived today, one minor complication though :p
Good news is the backplates were able to stay on.
The blocks don't extend over the edge of the card, so now I can't use my hard bridge to link the cards.
Had to remove the card stiffener as it was in the way of the block opening.
Ended up having to order some 45 degree fittings to clear the block, so the rig is down for a couple more days due to shipping.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
Nice runs Dumo, looks like those cards may go far.
Lookin good Gunny
@ Flesh thanks
Gotta go straight to cold
Poor mikey! Hahaha
Was messing around tonight using up the last of my LN2 so I can get a refill on Friday.
Managed a pretty decent Catzilla single card score, 3rd place globally. The card was at 1.5vgpu and 1.675vmem at -120C - next up is to complete the memory defroster jumper
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
I didn't get too far on water cooling, I wasn't thrilled with the RAM not having active cooling so I didn't push it too much. I will revisit H2O when the EK full cover blocks are available.
I've spent the last 3 hours getting them ready to play on LN2, time to go hard this afternoon.
More hardware junkie pics here: http://s36.photobucket.com/user/mgor...?sort=3&page=1
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
Can I play with you ?
First test with mine on firestrike @stock volt/ stock bios -> 1.13v on GT1 & 1.17v on GT2 or IDLE
Max 1290Mhz without throttle on GPU (fan @100% -> 61?C)
ASIC 77%
Dumo card look very strong
Welcome to XS Wizerty
Did you try cold with the card?
Posting Permissions
Reply With Quote
Bookmarks