Laing DDC 3.1 10W VS Laing D5/MCP655

[tistou77]

Hello

Currently I have a pump "Laing 10W" with a top Ek Waterblock

I would put a Laing D5 (or equivalent) with Bitspower mod with top.
Point of view of performance that will be like?

In position 5, the D5 is noisier than the Laing DDC?
Or is it better to put 3 or 4, but it will be less efficient?

The "In" will be on the side and the "Out" on the top of the top

Thanks so much for your help

[lowfat]

The D5 should be quieter. It should also have a higher flowrate than a 10W DDC. However this is meaningless when it comes to performance. Flow rate is highly overrated.

[Makymaco]

I had laing DDC but they are not very relaiable. Sometimes they fail to start.

I switched to D5, they are not noisier than DDC 10w on position 3/4

[tistou77]

Thank you for your answer

In position 5, it makes a little more noise?
And in position 4, the performance is "identical" to Laing DDC 10W?

thanks

[Conumdrum]

yes, at 5 you can hear the pump. At 3-4 you can't. Unless you have some odd loop the D5 at 3-4 will be fine. They also make a D5 PWM pump. Look around.