hey, just received the cpu earlier and notice that surface of HS is not flat. well done intelintel is making these chips without any consideration.as nothing is bothering them. now the problem will be when installing with H100i.and the results will be extra crappy no matter what i do. dont wana lap it that will void the warranty
. can i return it or may be using thick thermal paste or some other ideas?
Regard
[FSB<>BCLK]
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
Like... how uneven? A picture of it compared to known flat surface would be good
Asus Rampage IV Extreme
4930k @4.875
G.Skill Trident X 2666 Cl10
Gtx 780 SC
1600w Lepa Gold
Samsung 840 Pro 256GB
just busy setting up this build. used a thin blade edge on the hs and notice the corners was not even .so just installed it with h100 and old thermal paste i had. temps are not bad at stock settings like 29 idle on all cores and 60 load with linx. 30 ambient. these cpu runs cool. will push it further for real test
[FSB<
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
the problem now is coretemp show the diff between cores like 59,53,50,62 when tested with linx with latest linpack. thats what i were worried. did repaste and reseat the h100i without any difference. any other idea as i dont want to delid this one.
[FSB<
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
Do not try and delid, I believe all 2011 cpu's have flux less solder instead of tim.Originally Posted by xpower
thanks, looks like they did poor job. the problem is the temps as the cooler not making good contact with HS. the HS surface is not totally flat. cooler is perfectly flat.
[FSB<
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
RMA or lap it. those are the options.
Asus Rampage IV Extreme
4930k @4.875
G.Skill Trident X 2666 Cl10
Gtx 780 SC
1600w Lepa Gold
Samsung 840 Pro 256GB
Around 55-60?C full load with ambient temp at 30?C sounds perfectly fine for me.
I've had 3 Intel CPUs since I wen't to the dark side
Main: Windows 10 Core i7 5820K @ 4500Mhz, Corsair H100i, 32GB DDR4-2800, eVGA GTX980 Ti, Kingston SSDNow 240GB, Crucial C300 64GB Cache + WD 1.5TB Green, Asus X99-A/USB3.1
ESXi Server 6.5 Xeon E5 2670, 64GB DDR3-1600, 1TB, Intel DX79SR, 4xIntel 1Gbps
ESXi Server 6.0 Xeon E5 2650L v3, 64GB DDR4-2400, 1TB, Asrock X99 Xtreme4, 4xIntel 1Gbps
FreeNAS 9.10 x64 Xeon X3430 , 32GB DDR3-1600, 3x(3x1TB) WD Blue, Intel S3420GPRX, 4xIntel 1Gbps
OMG its a sucker not going to waste time to delid or even lap it. dont think rma replacement will be any better
Last edited by xpower; 07-16-2014 at 10:12 PM.
[FSB<
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
Posting Permissions
Reply With Quote
Bookmarks