Even more work done, mashed up some old ideas with why the f not attitude.
The worlds first Evapparatus will bring life to old cascades around the world.
A few pictures of the old and progression into new.
This design fits everything except AMD GPU and CPU's
Anyway, making sure everything fits the block.
This is the old block
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
That evap has seen a lot of action
Is that rubber O-ring all you need for the hold down bracket, or am I missing something. It's just i'm using a fairly large and quite hard to remove metal one. If a rubber one will do, it would make it easier for me in the future changing clamps.
It is a rubber o-ring and easy to remove.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Does the mount also include Intel sockets or NV GPU only?
Heatware
filmbot
That's great. I will see what I can dig up for my units.Originally Posted by FUGGER
I have made mounting for all Intel sockets
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Are there pictures in this thread as I cant see them.
-- EDIT --
OK, there are but can only see them in the source code, have to copy and paste into a new tab for them to show up.
Nice
Last edited by mongoled; 02-09-2014 at 01:28 AM.
Seasonic Prime TX-850 Platinum | MSI X570 MEG Unify | Ryzen 5 5800X 2048SUS, TechN AM4 1/2" ID
32GB Viper Steel 4400, EK Monarch @3733/1866, 1.64v - 13-14-14-14-28-42-224-16-1T-56-0-0
WD SN850 1TB | Zotac Twin Edge 3070 @2055/1905, Alphacool Eisblock
2 x Aquacomputer D5 | Eisbecher Helix 250
EK-CoolStream XE 360 | Thermochill PA120.3 | 6 x Arctic P12
the old one was pretty hammered lol
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
Another update
I do not have an oil return problem and my third stage expansion valve has been a champ running into a vacuum for countless hours on end. I wanted more yet did not want to increase compressor size or add another heat exchanger, I decided to try something different.
I Cleaned the insulation from around the block and exposed the liquid line. I added 1/4" copper tubing wrapped around the base of the block. I attached it to a 230L pressurized dewer to force feed LN2 to the base of my block taking me colder than before.
The first attempt was a bit too short but it did work, venting the LN2 into the base wasn't a problem.
Version 2.0 I added a cheap needle valve to test, surprisingly it still moved when frozen.
It all fits under existing mounting, other than cutting back insulation nothing else was touched.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Beast mode activated !
Hell yeah. Really looking forward to seeing some temps put of this now.
Posting Permissions
Reply With Quote
Bookmarks