Results 1 to 7 of 7

Thread: Quality problem with Q03

  1. #1
    Xtreme Member
    Join Date
    Jul 2010
    Location
    EU, USA
    Posts
    150

    Quality problem with Q03

    The power switch works erratically and doesn?t always click, so you don?t know if it turned on until you hear fan noise. On closer examination, the switch?s pc-board looks partially melted around the solder points, photo attached.

    IMG_8014_result.JPG




    Also, the left-side cover fits very poorly, photos attached. The case is very straight, I put it on a flat surface and there is no wobble. But the cover seems to have a slight bend on one end.

    IMG_8079_result.JPG
    left-side poor fit


    IMG_8080_result.JPG
    right-side ok


    I didn?t notice the problem until after the PC was fully assembled, so I?m reluctant to return it because the next one might have the same problem. Can you help?

  2. #2
    Registered User
    Join Date
    Sep 2012
    Location
    Taipei, Taiwan
    Posts
    171
    Quote Originally Posted by cab View Post
    The power switch works erratically and doesn?t always click, so you don?t know if it turned on until you hear fan noise. On closer examination, the switch?s pc-board looks partially melted around the solder points, photo attached.

    IMG_8014_result.JPG




    Also, the left-side cover fits very poorly, photos attached. The case is very straight, I put it on a flat surface and there is no wobble. But the cover seems to have a slight bend on one end.

    IMG_8079_result.JPG
    left-side poor fit


    IMG_8080_result.JPG
    right-side ok


    I didn?t notice the problem until after the PC was fully assembled, so I?m reluctant to return it because the next one might have the same problem. Can you help?
    Hi Cab,

    Did you just purchase this? Please fill out our RMA form here - http://www.lian-li.com/en/rma/

    Someone is awaiting your message.
    GlobalPR.com.tw | Official Agency for Lian Li
    Visit Lian Li at www.Lian-Li.com
    www.facebook.com/LianLiHQ

  3. #3
    Xtreme Member
    Join Date
    Jul 2010
    Location
    EU, USA
    Posts
    150
    OK, form done. If it helps, I can send you full-size photos by email. BTW, the design is a masterpiece, especially the mobo plate. Kindest regards.

  4. #4
    Xtreme Member
    Join Date
    Jul 2010
    Location
    EU, USA
    Posts
    150
    Also, I have a question for you. Does the 2.5" HD cage from the PC-Q09FN fit the Q03? If so, we'd like the purchase 4 of these. I'd be happy to order directly by email because these are not available at retail. Thank you.

  5. #5
    Registered User
    Join Date
    Sep 2012
    Location
    Taipei, Taiwan
    Posts
    171
    Quote Originally Posted by cab View Post
    Also, I have a question for you. Does the 2.5" HD cage from the PC-Q09FN fit the Q03? If so, we'd like the purchase 4 of these. I'd be happy to order directly by email because these are not available at retail. Thank you.
    The cages can fit in the PC-Q03 as long as an expansion card is not used. If you want to order them, please do fill out this form here. (Sorry to make you fill out so many forms, but it ends up being the most efficient way)
    GlobalPR.com.tw | Official Agency for Lian Li
    Visit Lian Li at www.Lian-Li.com
    www.facebook.com/LianLiHQ

  6. #6
    Xtreme Member
    Join Date
    Jul 2010
    Location
    EU, USA
    Posts
    150
    Quote Originally Posted by Lian Li Tech View Post
    The cages can fit in the PC-Q03 as long as an expansion card is not used. If you want to order them, please do fill out this form here. (Sorry to make you fill out so many forms, but it ends up being the most efficient way)
    Thank you. I placed an order for 4 of these, through your online form. However, I have no response on this OR my previous message regarding the above mentioned defective parts.

  7. #7
    Registered User
    Join Date
    Sep 2012
    Location
    Taipei, Taiwan
    Posts
    171
    Quote Originally Posted by cab View Post
    Thank you. I placed an order for 4 of these, through your online form. However, I have no response on this OR my previous message regarding the above mentioned defective parts.
    I'll look into it for you.
    GlobalPR.com.tw | Official Agency for Lian Li
    Visit Lian Li at www.Lian-Li.com
    www.facebook.com/LianLiHQ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •