Ivy-E 3D11 Physics LCC

[l0ud_sil3nc3]

lets get this started. . .

Requirements:

cpuz tab, memory tab, memtweakit or similar and completed physics window

4.5Ghz (+/- 5mhz) as most cpu's should do this on air

version 1.01 as this should yield the highest results.

4930K/4960X Ranking:

1. Splave - 18046 - 36x125.13 - 1334.7 8-12-8-28-96 - Asus R4E BE - G.Skill 2400 c8 2x2GB/PSC 1.8v all @ air
2. l0ud_sil3nc3 - 18042 - 29x155.33 - 1449.8 9-12-12-21-108 - Asus R4E BE - Corsair 2666 c10 2x4GB/HCH9 2.05v all @ air
3. maxxx - 17052 - 34x132.5 - 1413.4 11-14-13-25-108 - ASUS R4E - Avexir 2800c12 4x4GB/CFR 1.75v - CPU on H20 / RAM on air

4820K Ranking:

[l0ud_sil3nc3]

l0ud_sil3nc3 - 17984 - 34x132.5 - 1413.3 9-12-12-16-108 - Asus R4E BE - Corsair 2666 c10 2x4GB/HCH9 2.02v all @ air



18k done

l0ud_sil3nc3 - 18042 - 29x155.33 - 1449.8 9-12-12-21-108 - Asus R4E BE - Corsair 2666 c10 2x4GB/HCH9 2.05v all @ air

[Calathea]

You are setting the bar too high man I will give it a try on old GD45 Plus.

[maxxx]

Joining in. Just to bump the thread. Nothing spectacular...

maxxx - 17052 - 34x132.5 - 1413.4 11-14-13-25-108 - ASUS R4E - Avexir 2800c12 4x4GB/CFR 1.75v - CPU on H20 / RAM on air

[l0ud_sil3nc3]

PSC is pretty close, but still not good enough for the leader board

2666 c8 mixed Flares (2000 c7 & c9) 1.9v

[PytonOrm]

Hi man nice work ,what is max bclk for ivy bridge-e and air cooling ? what is your best bclk overclocking mate.

i have bought a 4820K ivy bridge-E runs with asus rampage iv extreme motherboard and 16gb G-Skill ripjaws 2133mhz cl11

and i have oced 185 Bclk yet, runs 4,7Ghz with 1,28v on air and super stable

[l0ud_sil3nc3]

Hi man nice work ,what is max bclk for ivy bridge-e and air cooling ? what is your best bclk overclocking mate.

i have bought a 4820K ivy bridge-E runs with asus rampage iv extreme motherboard and 16gb G-Skill ripjaws 2133mhz cl11

and i have oced 185 Bclk yet, runs 4,7Ghz with 1,28v on air and super stable

Never tried much more than 1.66 strap, but it works along with all others with no discernible performance difference. I think memory oc is easier on 1.25 and 1.66 than 1.00 however.

My 4820K ran Cinebench at 5Ghz 1.47v all with cold air so maybe 4.8 for daily stable is achievable on a good air cooler.

[PytonOrm]

Awesome man just same here 4,7 - 4,8ghz stable on air every day use but my gskill 2133 memory its holding me back for more
or its my old asus rampage iv extreme i dont know ?

Please can u help with advice man ! here is pictures of my timings and what or i can improve beter speed on memory

http://img820.imageshack.us/img820/2097/h8nb.jpg

[l0ud_sil3nc3]

Awesome man just same here 4,7 - 4,8ghz stable on air every day use but my gskill 2133 memory its holding me back for more
or its my old asus rampage iv extreme i dont know ?

Please can u help with advice man ! here is pictures of my timings and what or i can improve beter speed on memory

http://img820.imageshack.us/img820/2097/h8nb.jpg

Please post a memtweakit/asrock tc and the exact kit you are using.

4820K 4c 8t sub section added

[PytonOrm]

Those memeory i have in my rig http://www.webhallen.com/se-sv/hardv...0_2133mhz_cl9/

and i dont use memtweak program for timings only in bios i change


Today, iam pretty happy have done 192 bclk on 4820K master PytonOrm this is crazy man i never seen a higher bclk oc on any sandy bridge-e or new ivy bridge-e either

http://valid.canardpc.com/iu67pc

[filmbot]

Those memeory i have in my rig http://www.webhallen.com/se-sv/hardv...0_2133mhz_cl9/

and i dont use memtweak program for timings only in bios i change


Today, iam pretty happy have done 192 bclk on 4820K master PytonOrm this is crazy man i never seen a higher bclk oc on any sandy bridge-e or new ivy bridge-e either

http://valid.canardpc.com/iu67pc

He's saying please post Memtweakit screen for timing information comparison.

Congrats on the crazy high BCLK

[l0ud_sil3nc3]

New bios is strong

[Splave]

def just broke 18k with pshee :P

[Splave]

PSC back on top


So interesting physics 11, really sensitive especially to tRFC on this platform.

My findings so far.
-Use low vDIMM, started at 1.92v and then tried 1.94v before realizing I was way overvolting and kicked down to 1.800v where it was happy as pie.

-You cant just lower every timing on ivy-e. For example tRFC 88/84/78 all slower then 96. 94 a little slower 108 a little slower but not the much of a performance hit. My advice is load the shammy profile and max out your mhz before touching the timings. The guys a wizard and knows how it should be set (for the most part minus the tWCL5 on the sammy profile but probably just because the UBER gskill lab kits lol).

-Latency Boundary set to further. Nearer wont boot for me on PSC, Furthest is around 16.5k, further seems just right.

-Third timings dont seem to do much, secondary not much either, seems its all about the primarys.

-tWCL 6 is very unstable for me, shuts the comp down 2-3s into physics test. Seems tWCL 7 is fast enough :whistle:

-Play RTL's later

-I feel like booting at 125.0 and raising bclk in OS is always faster for physics and cinebench etc then booting anything over 125.0 IE booting 125.1 to get 4504 I get consistently 1799*'s. Booting 125.0 and raising to 125.1 with OC panel consitently 1802*"s+

[aussie-revhead]

Guys, I am surprised there hasn't been more action in this thread, unless its because you three have smashed it lol

How much influence does 125 BCLK have on your scores? Im on my second 4930K and this one cant boot at 125 BCLK or any ram speed near 2666 , so the best I can get for physics is low 16k range ....

You guys with BE's, have you tested with R4E also? Are there gains from the new mobo? Or is it all in a good cpu?

I think memory oc is easier on 1.25 and 1.66 than 1.00 however.

Is this true?

Edit: having said all that I just got mine running with higher CPU strap, but I still can't get it to post at 2666 .... So my best now is 16132 with 35x128.6 with PSC at 2400-8-12-8-26-2T