Results 1 to 2 of 2

Thread: Problem with 890fx chipet and 16gb of ram

  1. #1
    Member
    Join Date
    Dec 2002
    Location
    Leics UK
    Posts
    4,200

    Problem with 890fx chipet and 16gb of ram

    Hi guys.

    Not been on her for a very long time, so hello to anybody who remembers me
    If you need any help overclocking socket A or soldering (I doubt many of you guys do that any more :P ) im your man.

    Not been doing any proper overclocking for ages but ive recently run into a problem and i wanted some advice.

    I have a Asus M4A89TD PRO (890fx chipset) and was running 4gig of Gskill for ages but decided to upgrade to 16gb a few months ago.

    Since installing the new ram which is Crucial BLT2CP8G3D1608DT1TX0CEU, 16gb in two 8gb sticks CL8 1600
    I had some occasional instability which I put down to my overclock but the last few weeks its been worse and I had some HDD corruption so I thought I better try and fix it.

    Got rid of the overclock, dropped the memory timings down, then underclocked the ram, tried changing vmem but still had pretty much identical problems.

    I went back to my Gskill and everything is now fine, even overclocked its running stable again. I even ran prime95 and superPI.

    So all I really wanted to know is there anything I should setup when running 16gb on the 890fx chipset? TBH there are settings for memory timings in the BIOS I dont understand any more, im out of the loop

    Did I do the wrong thing getting two 8gb sticks rather than 4 4gb sticks?

    I might just have a duff stick of ram but I wanted to make sure I've not done anything dumb before I bother Crucial's RMA department.
    Don't assume I know what im doing I may have missed something obvious.

    Thanks for any help

  2. #2
    Xtreme Addict
    Join Date
    Aug 2006
    Posts
    1,557
    Have tried bumping the nb volts up (AMD IMC) that's what I had to do to get 4x4GB of single sided stable on the MSI 890FX.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •