Asrock Z87 OC Formula / G.Skill 2600 c10 @ LN2

[l0ud_sil3nc3]

So decided to freeze some Samsung as on air it absolutely kills most ic's and even though many believe cold doesn't bring much benefit, in my case I was able to go much further on LN2 than any of my air results.

Tested a new cpu, which may be the best Hasfail I have seen in my hands, safe vccin and safe vcore as I would like to keep this one around for a while

Setup is the OG Inflection and Triple Point sitting on top of factory Trident X heat spreaders as it was more than enough for this ic.

some 5Ghz 32m action:





uploading video of the above atm, even though it is slightly above the limit in the screenshot.









think this might be causing any issues

[nickshih]

it is lucky that ur 24pin is not burned -.-" awesome run ... congrats

[maxxx]

How'd you prevent condensation on the 24pin? Wrap around with eraser?

[l0ud_sil3nc3]

How'd you prevent condensation on the 24pin? Wrap around with eraser?

Nothing at all this time, but usually a blue shop towel

This was after benching for 10+ hours, started getting shutdowns wonder why hmmmm

quick update a 4G, still need to revisit this one as it feels a bit off

[l0ud_sil3nc3]

Video run

[hiwa]

Loud nice runs there, use earser for 24pin when using ln2 on memories man u kill the board.

[MaJ0r]

Nice results! Keep pushing.

[l0ud_sil3nc3]

Next step 3000+

[C-N]

Next step 3000+

go man go

You dofo got the drop on those Samsungs

BTW.... Top bit of work with the 32M thread 2933 run

[XBrytanX]

how much V for 2933 Loud ,I tried 2.25v but no dice ,could be the temps (-70 ) it seems like -60~65 is upper limit on my kit or IMC

[nacho_arroyo]

Amazing run Loud, here is my test with frozen Corsair Dominator Platinum 2666c10, i dont have RAM pot. Not good efficiency cause i not good with SP, but the board and the rams ROCKS!



Best Regards!

Nacho

[andressergio]

well done Nacho !!!

[Pt1t]

I tried same TDX 2600 C10 ... but Aircooled , 2.05V.

Running 32M video on youtube

http://www.youtube.com/watch?v=8NMtI...ature=youtu.be

[l0ud_sil3nc3]

^ Pt1t doing big things on air! Nice kit

[l0ud_sil3nc3]

Loud nice runs there, use earser for 24pin when using ln2 on memories man u kill the board.

I usually wrap blue shop towels around the 24 pin and it seems to do wonders man, but I forgot this time. I live in a climate with low humidity so as long as you keep it cold it is usually good for extended sessions and condensation does not really form, just a frozen ice block Not much you can do to stop the cold on a 10+ hour session.

I still think there is more in it, getting waza dialed seems to be soooo hard on this platform.

here is a no waza run with the Sammy's:



I am only shaving 3 seconds or so I think there is at least 0.5-1.0 second left with a dialed waza, killer bonus loop, lucky run etc. . . but to get that seems like it is just a numbers game, gotta run till you hit

Sometimes running 32M feels like playing the slot machines at Vegas, you never know when you are going to nail it, and when you do brix will be sh@t