Gtx 285 gpu

[Gandalf]

I'm looking for a GPU project that will accept a NVIDIA GeForce GTX 285.
Neither GPUGRID nor PrimeGrid seem to recognize this GPU.

It is not on OC's exclusion list...
http://www.xtremesystems.org/forums/...ldchap+210+gpu

EDIT:

I've discovered that the @Home will recognize the 285, if you don't have a 680 next to it, but it only sees one 285. Not two.
NVIDIA GeForce GTX 285 (2048MB) driver: 320.18

It will however see two 650 GPUs.
[2] NVIDIA GeForce GTX 650 (1023MB) driver: 320.18

[stoneageman]

You must have the following entry in your cc_config file in the options section.
<use_all_gpus>1</use_all_gpus>
otherwise only the most capable ones are used.
When firing up with two 285's, you may need to reboot for the driver to detect both.

[Gandalf]

You must have the following entry in your cc_config file in the options section.
<use_all_gpus>1</use_all_gpus>
otherwise only the most capable ones are used.
When firing up with two 285's, you may need to reboot for the driver to detect both.

I have that in the cc_config file.

EDIT:
Amateur night special... I had the cc_config file in the wrong directory.
All's fine now. Thanks, Stoneageman.