**[Official]]** ASRock z87 OC Formula + (M) Thread

[crustytheclown]

yeah bro don't boot staight 4.try first trdrd 5 and check stability,then try tighter

[MetalRacer]

Quick question, does the OC Formula M have Conformal coating?

[nickshih]

Quick question, does the OC Formula M have Conformal coating?

nope~~ , only Z87 OCF have it .. it takes more cost and time to produce

[Splave]

Gskill PI 2200c7/Flare 2000c7/Crycial Balistix 2133(PSC) .....(1.95v)-all the above can't pass 32M with tight pre-sets +[tRDRD 4]

EDIT ; try SA-.200~.250 also

80% of the psc Ive run wont do trdrd4 on air try 5-6-4 if passes, try 4-6-4

Im using
1.27vCore
1.27vCache
+.400 SA
.250IOA
.250IOD
2.28vCCIN

[XBrytanX]

Trdrd4 is not working on every kits .... u have to loose by 6 first .If wont go ... it might be 20% IMC and 80% memory kits

6 is good ,but I need 4 Nick and yes you (me) have to have pretty good set to do 4 ..I figured my best kit can pull it of tho (will play with it some more-if they won't cooperate -cold will make them )

yeah bro don't boot staight 4.try first trdrd 5 and check stability,then try tighter

80% of the psc Ive run wont do trdrd4 on air try 5-6-4 if passes, try 4-6-4

Im using
1.27vCore
1.27vCache
+.400 SA
.250IOA
.250IOD
2.28vCCIN

Thanks buddy

[THERULE]

hi Nick, in Europe there's no trace of OCF.
the ship is still going through the ocean?

Great job anyway, i can't wait to bench the OCF!

[nickshih]

hi Nick, in Europe there's no trace of OCF.
the ship is still going through the ocean?

Great job anyway, i can't wait to bench the OCF!

It is ture . our production is delayed little bit .

I believe it will be in stock soon .

[crustytheclown]

BBSE looking good here although i'm a bit dissapointed with some tertiary...
Mem training is very stressful at these frequencies...
How do you guys get such low trdwr?
Coating is all the money,first time a didn't used any vaseline...

[nickshih]

BBSE looking good here although i'm a bit dissapointed with some tertiary...
Mem training is very stressful at these frequencies...
How do you guys get such low trdwr?
Coating is all the money,first time a didn't used any vaseline...

you trdwr is good enough

it is still depends on your kits also IMC

please try to loose Tfaw to 26

but ur timing looking good

i will have new bios to patch new PSC and BBSE LN2 preset timing ...

how about 32m benching ?

[crustytheclown]

i'll do some 32m hopefully today,cpu is on air propably that's holding me back

[nickshih]

i'll do some 32m hopefully today,cpu is on air propably that's holding me back

100% sure u can do better with cpu under cold . -50 is nice

[crustytheclown]

time to fire up sofos' ss then...

[Splave]

please try to loose Tfaw to 26

so much this +1000

[nickshih]

so much this +1000

[ChanceCoats123]

Holy crap. Sold out on Newegg in a matter of hours. For some crazy reason, UPS returned my original package after taking it half way across the country (so I never got the first OC Formula that I ordered). I ordered again 15 minutes ago, and just checked now to find the board OoS. These things are selling like hot cakes.

[XBrytanX]

^^^............

[nickshih]

Holy crap. Sold out on Newegg in a matter of hours. For some crazy reason, UPS returned my original package after taking it half way across the country (so I never got the first OC Formula that I ordered). I ordered again 15 minutes ago, and just checked now to find the board OoS. These things are selling like hot cakes.

in stock now . also the 802.11 AC one ..

[splmann]

splmann & mat @ Vienna

[XBrytanX]

what's the proper way of setting 1.25 or higher strap on this mobo ? ..I keep getting 15

[Splave]

Set 125 and 125 bclk divider and filter pll high bclk mode

[XBrytanX]

got it

[Dumo]

Set 125 and 125 bclk divider and filter pll high bclk mode

Pretty in pink

[nickshih]

what's the proper way of setting 1.25 or higher strap on this mobo ? ..I keep getting 15

Normally , u dont have to touch the bclk ratio . i have auto rule

u just have to change the bclk u want ...

[XBrytanX]

^^ where can I find all the D-Bug codes for this MB....71 and 78 in particular ( the PDF only shows few ) ,I was also wondering when to use PCIE PLL Selection
Thank you

[nickshih]

^^ where can I find all the D-Bug codes for this MB....71 and 78 in particular ( the PDF only shows few ) ,I was also wondering when to use PCIE PLL Selection
Thank you

keeps those options in auto , already choosed best one for you

71 78 mean PCH unstable ... memory unstable or bclk too high might cause this issue .