Results 1 to 5 of 5

Thread: My Firest OC on Gigabyte GA-X58A-UD7 + Intel Core i7 920

  1. #1
    Registered User
    Join Date
    Dec 2007
    Posts
    4

    My Firest OC on Gigabyte GA-X58A-UD7 + Intel Core i7 920

    Hi all guys i want to try make a overclock in my PC but i have not good feel about how am i going to start so if u are willing please give me a help with that . Below i have my config

    CPU: QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
    Motherboard: Gigabyte GA-X58A-UD7
    Memory: 6 x Corsair Dominator 1GB DDR3-12800 1600MHz
    BIOS Version: F8
    GPU: NVIDIA GeForce GTX 660 Ti (Overclocked Version)
    \

    Please let me know if anything else u need to know. I am sorry if i ask it here but i could find any other place to feet

    Oh i have google it but it didnt worked for me ...... maybe wrong hardaware or i dont know what. So i post it here cause there is many guys who might be able to help me .....

    I have try also the below link but with ? BCLK Frequency (Mhz) ???. [166] instead of ? BCLK Frequency (Mhz) ???. [200] and its stable till now. I have open Orthos and CoreTemp and waiting for any errors. But i realy would appreciate any opinion in that matter for guys who is Expert lets say in this.... Anyway Thanks

    http://www.xtremesystems.org/forums/...te+GA-X58A-UD7



    FAILED....
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1032

    Additional information about the problem:
    BCCode: 1e
    BCP1: 0000000000000000
    BCP2: 0000000000000000
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1
    Please let me know if i have done anything wrong so i might be fix it....

    Best regards

  2. #2
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    133
    you are going to have to turn up vtt/qpi volts, then work bclk up, also uncore multi is too high
    Intel i5 3570K@4.6ghz, Swiftech Apogee GTZ, mcp655, Typhoon III and mcr320
    Gigabyte Z77X-UD3H, 8GB 2000 cl9, M4 128GB SSD, 2TB W-D green USB3.0
    MSI 7870 HAWK 1300gpu /1450mem, ASUS VG23AH 23" IPS 3D 72hz
    PCP&C 750W in CM651 case
    89 Ford Mustang coupe burnt orange on chrome ponies
    Bum & Hater #1
    HEATWARE: d50man

  3. #3
    Registered User
    Join Date
    Dec 2007
    Posts
    4
    This is all my config that point to 3.4Ghz OC of i7 920

    CPU Clock Ratio. [20X]
    Intel(R) Turbo Boost Tech. [Disabled]
    CPU Enhanced Halt (C1E). [Disabled]
    C3/C6/C7 State Support. [Disabled]
    CPU Thermal Monitor. [Enabled]
    CPU EIST Function. [Disabled]

    QPI Clock Ratio. [x36]
    UnCore Clock Ratio. [x16]

    Base Clock (BCLK) Control. [Enabled]
    BCLK Frequency (Mhz). [170]
    PCI Express Frequency (Mhz). [101]

    Performance Enhance. [Standard]
    Extreme Memory Profile (X.M.P.). [Disabled]
    System Memory Multiplier (SPD). [8.0]

    Load-Line Calibration. [Auto]
    CPU Vcore. [1.30000V]
    QPI/Vtt Voltage. [1.180V]

    DRAM Voltage. [1.640V]

    Thanks for the advice d50man. Please let me know if i have to change any value from your experience....
    • CPU: QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
    • Motherboard: Gigabyte GA-X58A-UD7
    • Memory: 6 x Corsair Dominator 1GB DDR3-12800 1600MHz
    • BIOS Version: F8
    • GPU: NVIDIA GeForce GTX 660 Ti (Overclocked Version)


    This is all my config that point to 3.4Ghz OC of i7 920

  4. #4
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    133
    hey,
    what kind of cpu cooling on the processor?
    what is your room temperature?

    qpi/vtt voltage will have to go UP 1.25v and up
    then turn bclk UP
    also use OCCT instead of orthos it worked better for me back in the x58 days
    Intel i5 3570K@4.6ghz, Swiftech Apogee GTZ, mcp655, Typhoon III and mcr320
    Gigabyte Z77X-UD3H, 8GB 2000 cl9, M4 128GB SSD, 2TB W-D green USB3.0
    MSI 7870 HAWK 1300gpu /1450mem, ASUS VG23AH 23" IPS 3D 72hz
    PCP&C 750W in CM651 case
    89 Ford Mustang coupe burnt orange on chrome ponies
    Bum & Hater #1
    HEATWARE: d50man

  5. #5
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,314
    try bringing the vcore up just a little to 1.15v or enable load line calibration.
    Your memory is not going fast and shouldn't be a problem at that speed.
    Increase the cooling, it should do that speed.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •