**[Official]]** ASRock z87 OC Formula + (M) Thread

[C-N]

no and no. I tried another CPU to be sure and things are the same.

I bent 10 bells of poop out of my bios trying to catch Splave the other day to the point my board would not pass more than a few turns of 32m with any ram at any speed. Not sure its exactly the done thing but I re flashed & hit cmos clear then updated mei again then cmos clear. I did this twice then backed up bios a - b booted & rebooted a couple times & all is well again.... might be worth a go if you cant get anything to run

[loopy83]

Is there another way to flash BIOS in DOS mode or sth like that?
Instant flash freezes during searching BIOS file on USB stick, ... no keyboard actions are possible, but mouse is working... no chance to flash BIOS from 1.31A...

[Vladutz20]

Try to use another stick or usb port.

[Splave]

Is there another way to flash BIOS in DOS mode or sth like that?
Instant flash freezes during searching BIOS file on USB stick, ... no keyboard actions are possible, but mouse is working... no chance to flash BIOS from 1.31A...

fat32?

[loopy83]

Of course this was the first I tested... second BIOS, another port, another stick, another file system...
Search found the Z87MOCF1.42 file and freezes with that screen... mouse is working and clock in the right corner keeps running... of course after CMOS clear, no OC, no special settings, nothing special...



Also without USB stick, after applying to "Instant Flash" the system freezes with "Searching...." writing instead of BIOS file name... strange

[xdan]

What type it's the stick? USB 2.0 or 3.0?
Better use 2.0, 3.0 might have bug from the chipset...
And use in a USB 2.0 port.

[loopy83]

USB2.0 stick used in a 2.0 port

DOS Tool with 1.40 BIOS is working...

It seems system freezes during searching through BIOS files. Used the third stick with a lot of files on it and it starts searching and stops with the first BIOS file it founds.
Maybe there's the problem

Ok... now go on with 1.40 from website.

Maybe, Nick, can you build me a DOS Tool with the actual BIOS?

[Splave]

If using USB keyboard and mouse try unplugging mouse before you boot while you are trying to flash.

[nickshih]

USB2.0 stick used in a 2.0 port

DOS Tool with 1.40 BIOS is working...

It seems system freezes during searching through BIOS files. Used the third stick with a lot of files on it and it starts searching and stops with the first BIOS file it founds.
Maybe there's the problem

Ok... now go on with 1.40 from website.

Maybe, Nick, can you build me a DOS Tool with the actual BIOS?

This issue happen to me also with kingston 64GB usb stick before .

after i format my USB stick again , then everything is working .

OK i will update a dos tool later .... but i think it is the problem by USB format ..and please put bios file only and try again ...

[l0ud_sil3nc3]

uh oh



http://valid.canardpc.com/show_oc.php?id=2867602

[l0ud_sil3nc3]

[nickshih]

Damn ...1.15volt 5G ....are u kidding me ?

[l0ud_sil3nc3]

4G

[XBrytanX]

good timing bro ...will be getting some LN on the way back from work ..
P.S. was going to freeze Corsair but now I might do HYKO lol,great stuff man

[l0ud_sil3nc3]

and some mandatory 5G

[Splave]

l0ud going cray in this biotch

[l0ud_sil3nc3]

l0ud going cray in this biotch

Full crayola!

[ChanceCoats123]

Put that sweet piece of Silicon under the cold stuff and show us 7ghz!

[l0ud_sil3nc3]

Put that sweet piece of Silicon under the cold stuff and show us 7ghz!

Saving it for a certain contest if you know what I mean

[ChanceCoats123]

Do you mind my asking the batch? I'm wondering if it's a Costa chip, or if you just finally got your hands on a good Malay chip.

[l0ud_sil3nc3]

do you mind my asking the batch? I'm wondering if it's a costa chip, or if you just finally got your hands on a good malay chip.

l312b512

[ZoLKoRn]

My best on MFR at 5GHz

btw. please don't serious to much for my sub-timing with value at 1 now i'll make sure later is it real or bug

Best on 1.25x bclk strap, RAM@3079MHz C11


Best on 1.00x bclk strap, RAM@2994MHz C12

[Shiranui Gen-An]

One of these boards suddenly showed up in stock at my local Micro Center, I am now a proud owner of a Z87 OC Formula!

[ChanceCoats123]

One of these boards suddenly showed up in stock at my local Micro Center, I am now a proud owner of a Z87 OC Formula!

Do you love it, or do you love it?

[Shiranui Gen-An]

Any tips for clocking 4x4GB or 4x8GB DIMMs on this board higher than 2800? I seem to get code 55 every time but can't figure out what timing is too tight (profiles don't help here).

Sent from my Nexus 4 using Tapatalk 2