MMM
    X

    Subscribe to New Ads!

    Receive weekly ads in your inbox!



Page 15 of 16 FirstFirst ... 51213141516 LastLast
Results 351 to 375 of 385

Thread: Haswell i5 4670K/i7 4770K batch and o/c results

  1. #351
    Registered User
    Join Date
    Dec 2008
    Posts
    5
    Got a crap 4770k batch 3313A943 stock VID 1.19v

    Currently running delid bare die water block, temps are terrible at stock load - 73 degrees using the newest prime95
    Last edited by tellis100; 10-01-2013 at 12:04 PM.
    Intel 4770k delid bare die- ASRock Z87 Extreme4 - G.Skill Ripjaws X Series 16GB 2133 - EVGA GTX680 Superclocked Signature - Samsung 840 Pro 256GB - Corsair HX850 - Coolermaster Cosmo S
    Swiftech Apogee XT block - Swiftech MCP 355 pump - Black Ice GTX 360 Rad - XSPC Res Top

  2. #352
    Xtreme Addict
    Join Date
    Mar 2009
    Posts
    1,116
    Folks, what's the fastest Intel chip that isn't s2011, isn't delidded, and is overclocked by a normal person on air? I assume it is haswell, but I need to check because you might have a surprise up your sleeves and the average 2600k or 3770k is better.

    Or maybe it is too close to call. Thanks yo

  3. #353
    Xtreme Member
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    285
    Quote Originally Posted by bamtan2 View Post
    Folks, what's the fastest Intel chip that isn't s2011, isn't delidded, and is overclocked by a normal person on air? I assume it is haswell, but I need to check because you might have a surprise up your sleeves and the average 2600k or 3770k is better.

    Or maybe it is too close to call. Thanks yo
    A 5 GHz 3770k seems less hard to find than a good 4770k. Might be the best choice if you need the clocks on air/h20. but it's really close race ofc. Sandy Bridge is too much a power hog in comparison IMO, but sure, some of them you could run at 5,2-5,3 GHz 24/7 if you don't mind pushig volts a lot. I'd say 4,8 GHz 4770k = 5 GHz 3770k = 5,2 Ghz 2600k.
    Overclocking, it's a lifestyle

  4. #354
    Xtreme Enthusiast
    Join Date
    Dec 2007
    Location
    Beneath The Remains, Greece
    Posts
    721
    Sold my previous cpu and got myself a new one (310B). This one can get in win7 and use normaly at 4.7Ghz with 1.2vcore/1.85vrin. I can also pass cinebench r15 at 4.5ghz with 1.2vcore/1.80vrin. All these on stock intel hsf since i wait some fittings to finish my water setup. I also tried 4.6ghz but i bsod as soon as first core reach 99c

    Sent from my GT-I9300 using Tapatalk 2
    Intel i7 3770K (4.8Ghz@1.36v) ~ Asus Maximus V Gene ~ 8Gb G.Skill Ripjaws X 2133 C9 (@2400 C10) ~ Asus GTX 670 DCUII (1230/7000) ~ Samsung 840 Pro 128Gb ~ WD Black 1Tb ~ Corsair AX 850W ~ X-Fi Titanium Fatal1ty ~ Epoz Aktimate Mini ~ Ducky Shine Blue Led /w MX Red ~ Logitech G700 ~ Samsung S27A850D 27" (2440x1600) ~ SilverStone TJ07B-W


    WaterCooled by XSPC Raystorm ~ TC PA 120.3 + 3xAP 15 ~ MCP655 with EK-D5 X-Top Rev.2 ~ EK Multi 250

    Powered by APC Smart-UPS SC 1500 ~ MGE ellipse premium 500


  5. #355
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    Dayton, OH
    Posts
    585
    At work so batch information on hand but will edit post later. Only settings changed is vCore and vCache, everything else auto. Probably can lower voltages a bit more but haven't had the chance yet but will soon. Next up will be trying to get cache up to 4600mhz also along with RAM at 2400mhz with my 16GB kit.

    CPU: 4770k @ 46x100
    RAM: GSkill Trident 2133 9-9-9 @ 1600mhz
    HS/F: Thermalright TRUE Black with 1x120x25mm Scythe (open air case, low/med speed using auto fan setting in BIOS, no OS software)
    vCore: 1.1875v (BIOS set)
    vCache: 1.15v (BIOS set)



    Last edited by filmbot; 10-17-2013 at 06:21 AM.
    Heatware
    filmbot

  6. #356
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Estonia/Tallinn
    Posts
    431
    I dont know what to do with my 4670k L311B662. Stock VID is 1.072. That thing wont even be stable @ 38 1.2v core , uncore 34. I couldnt get to windows @ 41 with 1.3v. How can it be that crap. Havent changed input voltage its 1.7 and the LLC is @ auto.

  7. #357
    Registered User
    Join Date
    Nov 2011
    Posts
    22
    My best 4670k so far:

    4670k|4500Mhz|1,123V|45|100.0|3800Mhz|2133 Mhz|ASRock Z87 Extreme6|Air|Delidded|L315B334|Boxed|ralle_h
    4670k|4800Mhz|1,258V|48|100.0|3800Mhz|2133 Mhz|ASRock Z87 Extreme6|Air|Delidded|L315B334|Boxed|ralle_h

    Had two similar CPUs that did ~1,15V @ 4,5 Ghz but already needed 1,3V for 4,8 Ghz. Scaling is everything.

    My Good L315B334 does 4,9 Ghz with around 1,3V but unfortunately im having big Problems with big 5

  8. #358
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    Dayton, OH
    Posts
    585
    Put on "safe" voltages and still going to work lowering them. Seems like this is the top end of my uncore for Prime stability within the voltage range I feel comfortable with.

    CPU: 4770k @ 46x100 Uncore: 4400mhz Batch: L310B492 Malaysia
    RAM: 16GB GSkill Trident 2400 10-12-10-31-2 @ 2400mhz
    HS/F: Thermalright TRUE Black with 1x120x25mm Scythe (open air case, low/med speed using auto fan setting in BIOS, no OS software)
    vCore: 1.2v (BIOS set)
    vCache: 1.3v (BIOS set)
    vCCSA: 1.15v (BIOS set)
    vIO A: 1.15v (BIOS set)
    vIO D: 1.15v (BIOS set)



    Last edited by filmbot; 10-22-2013 at 08:18 PM.
    Heatware
    filmbot

  9. #359
    Xtreme Member
    Join Date
    Nov 2009
    Location
    Gosport, Hampshire UK
    Posts
    220
    Your cache voltage is higher than your vcore, thought this was a no no, according to the experts.
    ASUS RAMPAGE V EXTREME, I7 5960X, 16Gig GSKILL DDR4 2666, CUSTOM WATERCOOLING[/SIZE]

  10. #360
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    Dayton, OH
    Posts
    585
    It very well maybe but I personally haven't seen it posted anywhere. These were the absolute ceilings I felt comfortable Priming with so I maxed them out to remove them as an issue. As of right now Priming same settings but with vCache set to 1.175v. Temps are higher due higher ambients this morning but it may be able to tough it out.
    Heatware
    filmbot

  11. #361
    Registered User
    Join Date
    Mar 2008
    Location
    smallbany, ny
    Posts
    88
    I finally got my new rig together and up and running. as of right now I turned c1e off and bumped the CPU voltage up to 1.2 and raised the multi up enough to get her up to 4.5 GHz. let it run prime for about 24 hours with no issues. highest temp I saw was 71c (h100i, still haven't delidded yet).

    are there any other settings I should manually set or is it safe leaving them on auto? don't really have the greatest understanding of a lot of the settings

  12. #362
    Xtreme Addict
    Join Date
    May 2004
    Posts
    1,042
    It seems interests have died down over the past month or so. Isn't anybody doing any more overclocking?
    Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
    Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
    Asus MA378-T with AMD Athlon 64 X2 7850
    ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
    BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
    Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2

  13. #363
    Xtreme Addict
    Join Date
    Jun 2006
    Location
    The O.C.
    Posts
    1,452
    Picked up one at Fry's who pricematched Microcenter at $199 for a 4770k.
    Picking up my Asus Hero VI next week and ordering some ddr3 2400 ram soon might wait for Cyber Monday. Gonna seen if it is a dog or not b4 considering delidding
    i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
    Asus P8P67 Vanilla
    Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
    Diamond HD 7970
    WD 600GB Velociraptor
    Corsair TX750W
    CM 690 II Advanced

    Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762

    G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839

  14. #364
    Registered User
    Join Date
    Jan 2007
    Location
    Iasi<<Romania
    Posts
    28
    CPU-Z - 5.100 MHz @ 1.4v @4T/4T
    SPI 1M - 5.000 MHz @1.4V @4C/4T

    Tried to get higher frequency with 2C/2T with the same voltage but no result.
    H2O cooling but only with 2 noctua@1.200 rpm.






  15. #365
    Xtreme Member
    Join Date
    Jan 2003
    Posts
    448
    My chip seems to be garbage. Put it under custom loop watercooling (Ek Supremacy Block & 2x 60MM Thick 360MM Rads).

    Cannot get 4.6Ghz stable. 4.5Ghz seems stable so far with 1.3V, uncore overclocking is trash...cannot find a stable spot when I start increasing it. Anything above 39X sends the system into a tantrum. Voltages don't seem to help either...have tried VCCIN 1.8-2.2 / VRING 1.15-1.25 / Vcore 1.275-1.35 (may try 1.425??)

    Chip still has it's lid on. With what garbage it seems to be I don't think it will be worth popping it off.


    Just tried 47X w/ 1.425vcore & 2.4vccin as a last ditch effort. No dice. Boots to desktop but hangs in a bench. /kicks stone.
    Last edited by Chr0n1c; 01-11-2014 at 04:28 PM.
    - i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
    - Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
    ~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~

  16. #366
    Registered User
    Join Date
    Oct 2008
    Posts
    7
    Hi people,

    after seeing this i am frightened to buy 4770k now. Far as I have read, only good ones are till L312xxx. From our supplier I see batches 329 and 334 are available. Does anyone have experience with those? My happy target is 4,5 GHz with Gryphon and NHD14. Thanks.

  17. #367
    Registered User
    Join Date
    Jan 2007
    Location
    Iasi<<Romania
    Posts
    28
    Mine is 3334B905

    You can see that it can do 4.5 Ghz@1.2v Prime95, SPI 1M@5ghz@1.4v and 5.100 MHz@CPUZ@1.4v.

  18. #368
    Registered User
    Join Date
    Nov 2004
    Location
    gville
    Posts
    41
    Just figured I'd chip in my results. Long time member, I build a system about every 5-6 years, so I'm a bit rusty, but here's what I put together for a Photoshop machine for my wife:

    Asus Maximus Hero 6
    4670k Costa Rica 3339B845
    32GB Gskill ripjaws 1600mhz
    640 GT video card
    Samsung 840pro
    EK watercooling kit; 240mm rad w/corsair high pressure fans in push pull
    Seasonic 650 modular

    Went through the usual "put it on 46 and 1.25vcore and see what it does", not stable. played with adaptive a bit, pushed vcore all the way to 1.42 (temps never broke 80c in my 75F room - thanks Florida winters).

    Current stable setup is 45x100, manual vcore at 1.395. 4.6 will post, but not stable even if I bump vcore. Temps never break 74c at 1.395vcore, stress tested AIDA64 for 8 hours in the heat of the day.

    Was hoping for more, have the cooling for at least 1.45vcore on a hasswell but it looks like this chip is just average.

    Just wanted to add that to the list.

    Cheers all, see you again in 6 years when I build my next system (unless somebody wants to unload a 4770k that does 5.0GHz on <1.45vcore)

    -dc
    SL6XK@6434Mhz / R350@420+ / 1024mb TCCD@2-2-2-6

    For to win one hundred victories in one hundred battles is not the acme of skill. To subdue the enemy without fighting is the acme of skill - Sun Tzu, The Art of War

  19. #369
    Registered User
    Join Date
    Nov 2004
    Location
    gville
    Posts
    41
    hah, my sig is hilarious, at least 2 machines ago. loved that PC-DL and TCCD with tight timings..had 36gig raptors in Raid 0 on that too....so noisy with stock IWT's...
    /end threadjack
    SL6XK@6434Mhz / R350@420+ / 1024mb TCCD@2-2-2-6

    For to win one hundred victories in one hundred battles is not the acme of skill. To subdue the enemy without fighting is the acme of skill - Sun Tzu, The Art of War

  20. #370
    Xtreme Member
    Join Date
    Apr 2006
    Posts
    234
    Ive got a Malaysia chip, currently doing 4.5ghz at 1.27v, seriously needs de-lidding, under prime95 core 1 hit 93oC while core 4 was round about 75oC with the other 2 cores hovering around the middle somewhere, this tells me the TIM and Lid are crap, however there is no way in this world I am putting a hammer to my chip, im sure plenty of you have done it, but it looks like total madness to me, I don't have ?250 to throw away.

    However one thing that's got me wondering about my overclock is the image below, Windows system doesn't show my overclock, but cpu-z does ?

    Im running it on a Gigabyte G1 Sniper Z87 board, could not for the life of me get it stable with the Gigabyte official bioses, so today I flashed the modded bios, F2b, worked perfectly straight away, a very easy overclock, and successfully ran 17.5 hours of Prime95 (the newest one), also running 4 x 2gb (8GB) sticks of G.Skill Ripjaws 2133mhz @ 9-11-9-28-2T.

    And on top of that, only 7.8 on the CPU in Windows User Experience when everything else is scoring 7.9, whats that all about ?
    Attached Images Attached Images
    Intel Core i7 920 2.66ghz @ 4.3ghz HT Enabled, core @ 1.34v, VTT @ 1.28v, NB @ 1.30v (212 x 21) Batch No: 3910A369
    6gb (3x2gb) G.Skill RipJawsX DDR3 17000C9 2133MHz @ 1640mhz 8-8-8-24-1T
    Gigabyte G1.Sniper Rev 1.0 @ 205fsb Beta Bios
    1 x OCZ Agility 3 120gb SSD, AHCI
    1 x Western Digital 500gb SATAIII 16mb Cache HDD, AHCI
    Sony DVD +/- R/RW/RAM x22 Dual Layer, AHCI
    2 x Saphire ATI Radeon R9 270 2gb (Crossfire)
    Gigabyte Odin 850w Modular PSU (Software Controlled)
    EK Supreme HF Copper LGA1366, Laing D5 Pump, 2 x 240mm Radiator & 120mm Radiator
    Cooler Master HAF XB LAN Box
    Windows Se7en Pro x64 bit
    .

  21. #371
    Registered User
    Join Date
    Oct 2008
    Posts
    73
    I just did an IHS removal on an i7 4770K, I should have check the quality before I think.

    Temps are stunning good now compared to standard, Batch is L347B947 - stock Voltage 1.048V

    Any how, the CPU seems to be a very bad OC CPU... 1,2V @ 4.3Ghz seems not to be stable, that sucks as others do 4.6 and more with that voltage. I don't have an idea what I might do wrong, but at only 1600 mem speed I only can imagine that the cpu voltage is to low and causes BS in prime 95 load.

    Voltage Limit in Linx, which stresses the CPU massively, are ~ 1.25V which results in ~85C - daily workload or Prime large FFT are less than 70 in this voltage.



    Edit: Prime 95 large FTT Temps are far much lower even on high voltage:



    -> 1.35V -> 4,5 Ghz not Prime stable, sucks
    Last edited by Krautmaster; 02-23-2014 at 06:40 AM.
    Intel 990X ES @ 6x4,60Ghz@1,440V klick / DFI UT x58@ MIPS HD6950@70@1Ghz / 256GB M4 SSD / X-Fi / HK3.0 - Laing Ultra - Thermochill PA120.3 + TFC 120er + Cape Cora Ultra 8x/ Aquaero Steuerung / Lian Li A7110B / Seasonic Platinum 1kw / 2xDell IPS 23" / Win 7 + Server 2008 R2/ DSL 16K
    HTPC + HTPC Wiki + sysProfile + Clarkdale @<15W + Eigenbau-Ambilight + Ambilight PreOrder

  22. #372
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    My New 4770K


    4770K 5GHz HT@ 1,395VCore + XP32 Full Not Tweaked + ASRock Z87M + GSkill 2933CL12 Stock + ANTEC Khuler 1250+ SEASONIC PLATINUM 1000W












    Cheers !!!
    Sergio
    Last edited by andressergio; 02-24-2014 at 04:57 AM.
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  23. #373
    Xtreme Mentor
    Join Date
    Jun 2008
    Location
    France - Bx
    Posts
    2,595
    Quote Originally Posted by andressergio View Post
    My New 4770K


    4770K 5GHz HT@ 1,395VCore + XP32 Full Not Tweaked + ASRock Z87M + GSkill 2933CL12 Stock + ANTEC Khuler 1250+ SEASONIC PLATINUM 1000W
    Great sample ! Well done uruguyan boy

  24. #374
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by Olivon View Post
    Great sample ! Well done uruguyan boy
    thanks Olivon !!! for those on faceb

    FX9370@ 5GHz 8-Core versus 4770K@ 5GHz 4c/8t comparison at SPI

    https://www.facebook.com/media/set/?...0479191&type=1


    And the Trip to from x48 to x50 with low volts

    https://www.facebook.com/media/set/?...&stream_ref=10


    Cheers to all !!!
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  25. #375
    Xtreme Addict
    Join Date
    Jun 2006
    Location
    The O.C.
    Posts
    1,452
    Awesome!

    What did you put on the resistors next to the bare die?
    i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
    Asus P8P67 Vanilla
    Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
    Diamond HD 7970
    WD 600GB Velociraptor
    Corsair TX750W
    CM 690 II Advanced

    Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762

    G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839

Page 15 of 16 FirstFirst ... 51213141516 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •