SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

[l0ud_sil3nc3]

Ye sounds good to me as well but mr loud is kicking my ass & I aint worked out why yet!!!!

Hey C-N it is simply the uncore + secondary and tertiaries. 4800 uncore a.k.a. cache should yield better results, but having core at 1:1 with uncore is going to be the fastest if you can get it to run, but I find it harder with all the retail cpu's I have tested so far, some needed as little as 1.5v others 1.65v all under cold to get 5Ghz uncore.

Also remember no need to run uncore higher than core, this is different in regards to X58 as this will yield a negative impact on your 32m time.

[hiwa]

Computex just finshed and now had time to chech te thread, as shamino said said in m6e giude uncore should ne 200/300 MHz lower than cpu freq. i did some run before computex and go t like 58,6xx with tight c7 wcl 7 , someone will post a crazy 55 soon

[C-N]

I got a few tertiary's to work out yet but nothing worth any real time mate

I think my chip is not all that but its only my 2nd one so I fingered fingers crossed I find something evil in the next few..... once I work out what evil that is!

Thanks for the uncore tip btw

### edit ###

Thanks Hiwa

P.S. 5.58.... YOU BIACH

[nachtfalke]

nachtfalke - 6:00:969s - 40x100 -4670k/SS - 1400 MHz - 9-12-12-21-102-1 - M6E - Gskill 2666 C10 2x4gb/Samsung HCH9 - 1.93v - stock air

not max out , 4670k it is weaker almost 1 second compared with 4770k my ram can ran same freq at 1.88v if i have 5* ambient ..it is very dependent from cold ambient...need try under LN2 soon

[l0ud_sil3nc3]

l0ud_sil3nc3 - 6:00:890 - 100x50 - 1400MHz - 9-12-12-21-108-1 - 4670K - Asus M6E - G.Skill F3-26000C10D-8GTXD 2X4Gb/Samsung - 2.025V - CPU water / RAM Air



l0ud_sil3nc3 - 7:22:750 - 125x32 - 1333MHz - 8-12-8-28-96-1 - 4670K - Asus M6E - G.Skill F3-19200CL8Q-8GBZHD 2X2Gb/PSC - 1.91V - CPU water / RAM Air

[nachtfalke]

nice run?s George i will update later the another results with 4670k

[crustytheclown]

George your second run is on psc right? i think you messed it a bit

[nachtfalke]

nachtfalke - 6:00:765s - 50x100 -4670k/SS - 1400 MHz - 9-12-12-21-102-1 - M6E - Gskill 2666 C10 2x4gb/Samsung HCH9 - 1.93v - stock air

[Dumo]

Dumo - 6:01:000 - 39x128.19 - 1410 MHz - 9-12-12-21-108-1 - M6E - Gskill 2600 C10 2x4gb/Samsung - 2.07v - SS/air



Uploaded with ImageShack.us

[Alex-Ro]

Alex-Ro - 6:01:469 - 50x100 - 1400 MHz - 9-12-12-23-105-1 - M6E - Corsair Platinum 2666 C10 2x4gb/Samsung - 1.91v - air/air 4700 cache

Best cpu from 3 pieces,seems like a proper haswell has to be a complete package mix between good core+good ring/cache+good imc,4800 frezes instantly,2860 ram same,binning is highly important

[Calathea]

Calathea - 6:03:594 - 49x102.1 - 1225 MHz - 8-10-7-24-84-1T - Z87X-OC - Gskill 2133 C8 4x2gb/BBSE - 1.80v - air/air

Just getting started. Not actually sure if 4x2 is faster on haswell, but I hope so lol.

[nachtfalke]

Efficient run Alex, given uncore is 4700, good job. and also nice ram

[Splave]

Guys why aren't you running cache speed 5ghz? Can retail not do it on air?

[Alex-Ro]

5 ghz cache no post,stucks at random codes,4900 same,4800 post and freezes,4700 barely stable with 1.45 cache voltage,retails seems so weak

[Splave]

Yikes

[C-N]

Mine can run 5GHz cache but its no faster in my hands than the 4700 ~ 4800 hiwa suggested in the post above.

[Vivi]

Splave post them scores bro!

[C-N]

Little better but still no cigar....

C-N- 6:02:250 - 50x100 - 1400MHz 10-12-12-18-120-1 - Gigabyte GA-Z87X-UD5H - Corsair 2666 C10 Samsung HCH9 - 1.62v - CPU Water Kuhler 920 / Ram Air

[Calathea]

Little better but still no cigar....

C-N- 6:02:250 - 50x100 - 1400MHz 10-12-12-18-120-1 - Gigabyte GA-Z87X-UD5H - Corsair 2666 C10 Samsung HCH9 - 1.62v - CPU Water Kuhler 920 / Ram Air

You're still running only 3,9 uncore? At least on OC board you need newest beta bios to fix multi not sticking, maybe look into it.

[C-N]

You're still running only 3,9 uncore? At least on OC board you need newest beta bios to fix multi not sticking, maybe look into it.

Thanks mate.. I got the latest F6 but I cant run ddr 2800 for some reason so stuck with F5 for now.

[l0ud_sil3nc3]

Guys why aren't you running cache speed 5ghz? Can retail not do it on air?

[Calathea]

^ lol

[Alex-Ro]

binning for moa is going to be costly....

[nickshih]

Let's Battle , Asrock Z87M OC Formula , "5g"= 125.04 X 40 , memory 2667Mhz , 5min36s.343


Nickshih - 5:56:343 - 40x125.04 - 1334.8MHz - 6-10-6-20-64-1 - ASRock Z87 OCF-M - Gskill 2300mhz 2x2GB/PSC - 2.21v - Ln2/Ln2

[Alex-Ro]

Woow,nice run nick!