SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

[l0ud_sil3nc3]

longer than Andre

[Splave]

^ roflllllllllllllll

[Calathea]

Calathea - 6:01:453 - 39x128.3 - 1283 MHz - 8-11-7-24-86-1T - Z87X-OC - Gskill 2133 C8 2x2gb/BBSE - 1.85v - air/air

Thanks to dinos and sin's oc-guide



Tried single stage to get that lousy cache frquency up a notch, but ended up being stuck trying to post 2500 cl8 for a hour before I gave up. Seems like cpu doesn't clock ram as good on cold.

[dinos22]

Good start keep pushing.

Cold shouldn't impact negatively on memory oc, it should only improve it a bit. Definitely try again.you need that uncore to go sub 6

[l0ud_sil3nc3]

Good start keep pushing.

Cold shouldn't impact negatively on memory oc, it should only improve it a bit. Definitely try again.you need that uncore to go sub 6

I don't know how you guys are running BBSE on Haswell, so much fail for me, and the worst type of fail, the "I'm not even going to boot" sort of fail

I think sub 6 can be done with 4.7-4.8 uncore, but you are right, the higher to 1:1 the better. Looking forward to seeing some cold results from you and your beastly BBSE

Looks like Zen might come up this weekend for some benching. He is going to bring the beastly air BBSE kit of his, to test under cold on a few different boards. We will have the M6E, OCF's, Giga OC and possibly MPower Max if CL3P can bring it, should be an awesome time hunting for sub 56's

[l0ud_sil3nc3]

last screens for this half of the kit.

l0ud_sil3nc3 - 7:18:984 - 40x100 - 1300.8 MHz - 6-10-6-24-68-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.1v - LN2 @ all





l0ud_sil3nc3 - 5:56:750 - 50x100 - 1300.7 MHz - 6-10-6-24-68-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.1v - LN2 @ all

[runmc]

Looks like Zen might come up this weekend for some benching. He is going to bring the beastly air BBSE kit of his, to test under cold on a few different boards. We will have the M6E, OCF's, Giga OC and possibly MPower Max if CL3P can bring it, should be an awesome time hunting for sub 56's

You live a long way from me. I wish I could just come watch and be the Cabana Boy.
Your benching is coming on strong! Are you by any chance sleeping or eating?

[ZenEffect]

Are you by any chance sleeping or eating?

not until the juice runs out.... and 7:16 4ghz or 5:54 5ghz is hit

[l0ud_sil3nc3]

You live a long way from me. I wish I could just come watch and be the Cabana Boy.
Your benching is coming on strong! Are you by any chance sleeping or eating?

Sleeping and eating. . . . check

Thanks Ron, I would love to get together the next time I am in Texas especially since Mikecdm lives so close, I figure we could have a mini North Texas meet lol.

I am sure the humidity is not so bad as down in Corpus Christi say, but it is a pleasure to bench out in California, where relative humidity is 34 % on a bad day and 16 % on a good day

I think we need to organize a West Coast event, it has been a long time since there was anything in the US and this blows my mind, as I am sure we are not a small market.

[ZenEffect]

Sleeping and eating. . . . check

Thanks Ron, I would love to get together the next time I am in Texas especially since Mikecdm lives so close, I figure we could have a mini North Texas meet lol.

I am sure the humidity is not so bad as down in Corpus Christi say, but it is a pleasure to bench out in California, where relative humidity is 34 % on a bad day and 16 % on a good day

I think we need to organize a West Coast event, it has been a long time since there was anything in the US and this blows my mind, as I am sure we are not a small market.

or something for CES. vegas is only 4 hours away... would be easy with the west coast guys to make xxx vendor look pretty good for a few days with minimal travel distance.

[XBrytanX]

XBrytanX - 7:21:953 - 40x99.97 - 1399MHz - 9-12-12-21-110-1T - ASRock OCF- 2x4gb Corsair 2666c10 -samsung HCH9-RAM air[2.03v]/cpu H20

[XBrytanX]

XBrytanX - 7:21:765 - 40x99.97 - 1399MHz - 9-12-12-21-110-1T - ASRock OCF- 2x4gb Corsair 2666c10 -samsung HCH9-RAM air[2.03v]/cpu H20
9-12-12-19-108 is np with this kit ..just have to get my waza going

[Calathea]

Calathea - 6:00:890 - 39x128.3 - 1283 MHz - 8-11-7-24-86-1T - Z87X-OC - Gskill 2133 C8 2x2gb/BBSE - 1.85v - Cpu SS/ram air



Sadly I can only load settings with ddr3 2500 on + degress. This gives me anywhere between 5-30 minutes before mobo gives nasty reset upon reboot or crash, then its game over and shut down compressor :P

[AndreYang]

AndreYang- 7:17.203 - 40x100.00 - 1333.3MHz - 6-11-7-24-64-1 - ASUS Maximus VI Extreme- GSkill 2500mhz 2x2GB/PSC - 2.2v - LN2 CPU/Mem

[TaPaKaH]

Are the 2500C8 Tridents the demonstrator kit from Computex kit from a couple of years ago or you actually managed to find them in retail?

[AndreYang]

Got it from gskill 2 years ago. Don't think it's retail on the market.

[Splave]

^Fair enough

[tool_462]

^Fair enough

Actually, not fair! :p


Seems the Asrock OC Formula is pulling some good efficiency, I really need to get back into benching a bit!

[Alex-Ro]

we have awesome cards this generation,too bad intel screwed up the retail haswell big time....

[Calathea]

Have faith Alex-Ro :P When those Costa Ricas hit the market... Well at least that's my hope!

[l0ud_sil3nc3]

Well crap and here I thought I had a decent 4Ghz time

Time to go back to the drawing board.

[hiwa]

Got it from gskill 2 years ago. Don't think it's retail on the market.

CL9 were retail on newegg but only some limited kits and sold out in one day, james and me and thomas have some, but this is first time i saw C8
http://www.xtremesystems.org/forums/...Ln2&highlight=

[bullant]

Well crap and here I thought I had a decent 4Ghz time

Time to go back to the drawing board.

Looks like he's on too something good,he's really worked out something good from looking at his AIDA64 it looks really good.So much to learn on this new platform given time we will all work it out,we are problem solvers,just have to work out the puzzle
@AndreYang, very nice time man

[l0ud_sil3nc3]

Looks like he's on too something good,he's really worked out something good from looking at his AIDA64 it looks really good.So much to learn on this new platform given time we will all work it out,we are problem solvers,just have to work out the puzzle
@AndreYang, very nice time man

Indeed he is, the 4Ghz time is epic

Going to be back at it tonight though, with a different kit.

[l0ud_sil3nc3]

Have faith Alex-Ro :P When those Costa Ricas hit the market... Well at least that's my hope!

All ready in Northern Cali, going to pick up one or two tomorrow if time permits, hoping for some Costa Rican magic in a box!