Page 30 of 37 FirstFirst ... 2027282930313233 ... LastLast
Results 726 to 750 of 905

Thread: SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

  1. #726
    Xtreme Member
    Join Date
    Apr 2012
    Location
    Melb, AU
    Posts
    236
    any of you guys been able to get 100bclck and 2933 9-12-12 on samsung to boot?
    if so, what did it take?

    i7 4770K [L315B347]
    Gigabyte Z97 SOC Force
    F3-2600C10D-8GTXD | F3-2666C11Q-16GTXD
    GTX780 Epower2
    Corsair AX1200i
    TRUE Copper| Custom Water | Kingpin Venom 6.66 | Kingpin Tek-9 Fat


    i7 4770K [L312B515] | Asus Max VI Impact | 2x8GB Kingston 1600c10
    600GB WD Velociraptor
    GTX580 Classified
    Silverstone M600W Strider
    Coolermaster Elite 130


    i3 3225 | Asrock B75M Pro3 | 2x4gb Kingston 1333c9
    Intel 520 60GB | LSI 9211-8i | 6x Seagate 4TB
    Silverstone M600W Strider
    Silverstone GD08

  2. #727
    Xtreme Addict
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,246
    GOOD sticks + pumping voltage==>WIN

  3. #728
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Been a bit quite in here should have some more ln2 by the weekend,will keep pushing

  4. #729
    Registered User
    Join Date
    Jan 2013
    Location
    FL,USA
    Posts
    39
    Click image for larger version. 

Name:	4gcReGY.jpg 
Views:	717 
Size:	191.9 KB 
ID:	131380
    What's the deal? cannot upload image?
    Last edited by schmuckley; 10-01-2013 at 04:22 PM.

  5. #730
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    Quote Originally Posted by AVulgarPicture View Post
    any of you guys been able to get 100bclck and 2933 9-12-12 on samsung to boot?
    if so, what did it take?
    Sure, have a look
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  6. #731
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    Quote Originally Posted by schmuckley View Post
    Click image for larger version. 

Name:	4gcReGY.jpg 
Views:	717 
Size:	191.9 KB 
ID:	131380
    What's the deal? cannot upload image?
    Image upload is broken here, best to use a third party image hosting site such as imgur and link it.
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  7. #732
    Xtreme Member
    Join Date
    Apr 2012
    Location
    Melb, AU
    Posts
    236
    Quote Originally Posted by Alex-Ro View Post
    GOOD sticks + pumping voltage==>WIN
    i think my sticks are pretty decent. had 2800 9-12-12 pretty tight.
    Quote Originally Posted by l0ud_sil3nc3 View Post
    Sure, have a look
    so you needed cold for them to post that low? or it just helped?

    i7 4770K [L315B347]
    Gigabyte Z97 SOC Force
    F3-2600C10D-8GTXD | F3-2666C11Q-16GTXD
    GTX780 Epower2
    Corsair AX1200i
    TRUE Copper| Custom Water | Kingpin Venom 6.66 | Kingpin Tek-9 Fat


    i7 4770K [L312B515] | Asus Max VI Impact | 2x8GB Kingston 1600c10
    600GB WD Velociraptor
    GTX580 Classified
    Silverstone M600W Strider
    Coolermaster Elite 130


    i3 3225 | Asrock B75M Pro3 | 2x4gb Kingston 1333c9
    Intel 520 60GB | LSI 9211-8i | 6x Seagate 4TB
    Silverstone M600W Strider
    Silverstone GD08

  8. #733
    Xtreme Enthusiast
    Join Date
    Jul 2010
    Location
    Berlin, germany
    Posts
    509
    Try 2933 10-12-12 first, if they fail, TRCD limit is low. And decent is relative, if you already need 2,1v for 1400c9 for example, you will most likely run out of voltage to even boot 2933 c9 on air...

  9. #734
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    Quote Originally Posted by AVulgarPicture View Post
    i think my sticks are pretty decent. had 2800 9-12-12 pretty tight.

    so you needed cold for them to post that low? or it just helped?
    My kit definitely needed cold to run those speeds, not happening on ambient temps.
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  10. #735
    Xtreme Member
    Join Date
    Apr 2012
    Location
    Melb, AU
    Posts
    236
    Quote Originally Posted by websmile View Post
    Try 2933 10-12-12 first, if they fail, TRCD limit is low. And decent is relative, if you already need 2,1v for 1400c9 for example, you will most likely run out of voltage to even boot 2933 c9 on air...
    will give this a go. thanks.

    i7 4770K [L315B347]
    Gigabyte Z97 SOC Force
    F3-2600C10D-8GTXD | F3-2666C11Q-16GTXD
    GTX780 Epower2
    Corsair AX1200i
    TRUE Copper| Custom Water | Kingpin Venom 6.66 | Kingpin Tek-9 Fat


    i7 4770K [L312B515] | Asus Max VI Impact | 2x8GB Kingston 1600c10
    600GB WD Velociraptor
    GTX580 Classified
    Silverstone M600W Strider
    Coolermaster Elite 130


    i3 3225 | Asrock B75M Pro3 | 2x4gb Kingston 1333c9
    Intel 520 60GB | LSI 9211-8i | 6x Seagate 4TB
    Silverstone M600W Strider
    Silverstone GD08

  11. #736
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Was playing with some cold memorys today and freq,was able to get 18 loops to pass with waza @ these timings and speeds,will get this to pass then push freq to 6.5ghz.I would of screen shot but at loop 18 it shut down
    Last edited by bullant; 10-05-2013 at 06:57 AM.

  12. #737
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Man sux :/
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  13. #738
    take me to the manbar
    Join Date
    Apr 2008
    Location
    South Africa :)
    Posts
    1,179
    link brokeeeen bull

  14. #739
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Quote Originally Posted by Vivi View Post
    link brokeeeen bull
    ahahh,what link ? you mean my shut down i said i had at loop 18,if so that is normal,when running memory so cold -160+ some times after these shut downs code 55 sets in ,this is the time to give up.Even if you can get it back to windows everything becomes unstable,did bench with everything yesterday and everything is still fine The OCF is bullet proof
    Last edited by bullant; 10-07-2013 at 12:50 AM.

  15. #740
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Little bit more guys
    bullant - 5:55.312 - 50x100.6 - 1400MHz - 6-10-6-24-64-1 - OCF - GSkill Pis 2x2GB/PSC - 2.19V -CPU-25,Memory Ln2 -160


  16. #741
    Xtreme Member
    Join Date
    Aug 2004
    Location
    \\Singapore\OCXPH$
    Posts
    379
    Great run bullant!

  17. #742
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Quote Originally Posted by maxxx View Post
    Great run bullant!
    Thanks man.

    Quote Originally Posted by Tommi_Vercetti View Post
    wow wonderful result bullant!
    Thanks Tommi
    Last edited by bullant; 10-11-2013 at 01:05 AM.

  18. #743
    Registered User
    Join Date
    May 2007
    Posts
    20
    del
    Last edited by Tommi_Vercetti; 10-11-2013 at 09:53 AM. Reason: duplicate

  19. #744
    Registered User
    Join Date
    May 2007
    Posts
    20
    Still struggling to break 6:00 barrier..
    Tommi_Vercetti - 6:00.297 - 50x100 - 1400.00MHz - 9-12-12-17-107-1 - ASROCK Z87-OCF - G.Skill 2600C10 4GB x2 - 2.2v - CPU H2O/RAM AIR

  20. #745
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Nice Tommi ^
    had little play with 5ghz today,trying few things that Ive learn t over the last few days.Was using old OS and think its corrupt,however was pushing bit harder today and seeing what was there,was able to pass 2 loops of 32M with this and with waza,will try it again later with fresh OS to see if there is any improvement

  21. #746
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Ukraine, Dnepropetrovsk
    Posts
    381
    Quote Originally Posted by bullant View Post
    Nice Tommi ^
    had little play with 5ghz today,trying few things that Ive learn t over the last few days.Was using old OS and think its corrupt,however was pushing bit harder today and seeing what was there,was able to pass 2 loops of 32M with this and with waza,will try it again later with fresh OS to see if there is any improvement
    wow you're so close to 5.54 ))) And of course awesome memory frequency with such a tight timings

    Forgive for my English because I only learn it

  22. #747
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Ukraine, Dnepropetrovsk
    Posts
    381
    My Samsung 4GHz result
    MaJ0r - 7:19:828- 39x102.61 - 1436.6 MHz - 9-12-12-18-108-1T - Asrock Z87 OCF - TeamGroup 2800 C11 2x4GB/Samsung HCH9 - - 2.15v - air/air

    I'm away from Hiwa about 0.3sec, may be I have to try catch fast run or reinstall OS. If somebody has a good idea how to improve my result let me know please.

    Forgive for my English because I only learn it

  23. #748
    Registered User
    Join Date
    Nov 2006
    Posts
    2,609
    First of all CW major then lucky run.
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  24. #749
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    rerun rerun rerun for 5 hours or so and you will see lucky run
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  25. #750
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Ukraine, Dnepropetrovsk
    Posts
    381
    Quote Originally Posted by Splave View Post
    rerun rerun rerun for 5 hours or so and you will see lucky run
    I tried about 3 hours, seems I made a mistake I had to do it two hours longer ))

    Forgive for my English because I only learn it

Page 30 of 37 FirstFirst ... 2027282930313233 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •