Page 34 of 36 FirstFirst ... 24313233343536 LastLast
Results 826 to 850 of 897

Thread: SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

  1. #826
    Registered User
    Join Date
    Sep 2013
    Location
    Scotland, UK
    Posts
    29
    Damn, nice time! That's what i was running with 9-12-11-21-1T@2666mhz with x52/x49! (same kit)

    Dialing in 2800mhz now, can't get it to boot past 2828mhz on mine though which is annoying. Sitting at 9-12-12-21-1T@1.85v and going through tertiary's. Looking forward to getting some 4/5 gig runs done once finished and posting some screens! Quick question though, i can drop tRAS lower than 21, i.e, is it advised or does the cas+tRCD rule come into play?

  2. #827
    Xtreme Addict
    Join Date
    May 2007
    Location
    Hampshire, UK
    Posts
    1,631
    Quote Originally Posted by hicookie View Post
    Interesting,need to cool my CPU to get 5GHz Uncore
    nice result, C-N
    Thanks hicookie, for me 5G Uncore gained .100 ~ .200 over 4800

    Quote Originally Posted by Doug2507 View Post
    Damn, nice time! That's what i was running with 9-12-11-21-1T@2666mhz with x52/x49! (same kit)

    Dialing in 2800mhz now, can't get it to boot past 2828mhz on mine though which is annoying. Sitting at 9-12-12-21-1T@1.85v and going through tertiary's. Looking forward to getting some 4/5 gig runs done once finished and posting some screens! Quick question though, i can drop tRAS lower than 21, i.e, is it advised or does the cas+tRCD rule come into play?
    Thanks Doug2507, Keep at it mate you'll get it going & get them screens up.

    With regards to tRAS all I can say is it works for me! I believe the CPU has as much to do with low tRAS as the RAM as my other chip in my Giga can run 2860 @ 12 where as my OCF chip needs 15+


    Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.

    Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.

    Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.

  3. #828
    Registered User
    Join Date
    Sep 2013
    Location
    Scotland, UK
    Posts
    29
    1st efforts…





    So so but a little disappointed after spending 4 days OC'ing ram. Seem to be a good few seconds off the average and thats with using a stripped copy of XP and an attempt at wazza. I'll need to go watch splaves vid on wazza and do more investigating.

    Apologies for no timings window in the screens. On a MSI board so tweakit doesn't work for me and haven't installed command centre. All timings are reasonably tight but struggled to get the _DD/_DR's locked down.

    9-12-12-18-1T@1.89v Corsair Dominator Platinum 2666C10.

    One thing thats puzzling me is latency is still around 40ns. Can't seem to drop it much at all. Not sure if thats a ram/board/timing issue.

    This was pretty much the limits that i could achieve, can't remember if i did that with 50 or 52 on the core. I'd adjusted a couple of latency options available within the msi bios but couldn't do a pi run with them.



    Onwards and upwards!
    Last edited by Doug2507; 12-05-2013 at 04:29 AM.

  4. #829
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    138
    asrock memory tools works for me on mpower max, not sure about other models. Numbers are tiny though, i can't read anything in your screen shot.

  5. #830
    Registered User
    Join Date
    Sep 2013
    Location
    Scotland, UK
    Posts
    29
    Should be able to click then enlarge.

  6. #831
    Pie assassin
    Join Date
    Nov 2007
    Location
    Where lights collide
    Posts
    2,271
    im going to take a guess here, but im willing to bet its the mpower. look at the top scores, you are pretty much in line with the msi guys for a first try.
    Current Status - Testing & Research

  7. #832
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Been a bit quite in here guys,will be trying 5ghz next week again been awhile for me without ln2

  8. #833
    Registered User
    Join Date
    Sep 2012
    Location
    BIOS
    Posts
    68
    My first run with OCF

    1333MHz CL8 @ Air


  9. #834
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Germany
    Posts
    220
    It's been quite a while for me now..
    today petris triple point i ordered finally arrived and i had to give it a try. the evening started at about 7 o'clock. as i removed hs carefully from tridents, i had one dimm that was badly soldered (again!), ironically the best one which was stuck on hs. i already had a similar experience when i tried some trident on ivy bridge without hs on ln2 - after cooling down, some ics blew up from the pcb. so i decided to take them aside, with one stick dead and sticked to some pi i got from Roman/der8auer. after some 4ghz action for country cup, i switched to 5ghz and tried more and more. now, 7 hours later, i got tired and decided to post some results (the setup wanted to run again and again, no errors, no strange behaviour, setup 1:0 me )



    some hours later..



    it was a pain to get some proper runs. i had about 5 runs that failed at loop 23 or 24, most of them failed before. next thing of course is to get a fast one..after i had some, i thought..oops, you should have captured this one on video..so let's do one again..hm not exact ..so one more..not exact? after another hour i got one..luckily that one was the fastest i did today

    angoholic - 5:55.047 - 50x100 - 1400 MHz - 6-10-6-24-64-1 - ASRock Z87 OC Formula - G.Skill 2000C6 PI - 2.2v - LN2 cooled



    video should be up in a while....

    € there it is...if you hear some strange noises, this is our hamster going mad

    Last edited by angoholic; 12-13-2013 at 11:26 PM.
    [SIGPIC][/SIGPIC]

  10. #835
    Xtreme Enthusiast
    Join Date
    Jul 2010
    Location
    Berlin, germany
    Posts
    509
    Great run - grats on the new pole

  11. #836
    3D Team Captain
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,130
    Well done, Boris!

    I'll update the thread on Sunday.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  12. #837
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Awesome time angoholic,was wondering when you would post a time,Knew you would have something awesome

  13. #838
    Awesome run angoholic, i think beating this one will be not that easy. The fastest i saw at 1375 was maybe 55.1xx ...
    All my runs reboot at 23,24 loop too.
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  14. #839
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Awesome run Angoholic


    Testing quad 2666C10 on 2011

    Last edited by Dumo; 12-14-2013 at 10:45 AM.

  15. #840
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Ukraine, Dnepropetrovsk
    Posts
    381
    angoholic superb result, congrats!
    Dumo damn is it on air?

    Forgive for my English because I only learn it

  16. #841
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Yes, on air MaJ0R @ 2.26V

    Cpu h20

  17. #842
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,601
    Quote Originally Posted by Dumo View Post
    Awesome run Angoholic


    Testing quad 2666C10 on 2011


    Please re run with the Country Cup background!
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  18. #843
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Germany
    Posts
    220
    Thanks guys

    nice sticks Dumo
    [SIGPIC][/SIGPIC]

  19. #844
    Registered User
    Join Date
    Sep 2012
    Location
    BIOS
    Posts
    68
    Nice Ango.

    5GHz/1300 CL8-12-8-27-1T @ Air

    Last edited by nfszocker; 12-16-2013 at 01:27 PM.

  20. #845
    3D Team Captain
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,130
    Update.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  21. #846
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,084
    z87 OCF 32m benchers choice it seems nice runs
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  22. #847
    Xtreme Member
    Join Date
    May 2009
    Location
    Australia
    Posts
    363
    Quote Originally Posted by Splave View Post
    z87 OCF 32m benchers choice it seems nice runs
    Very true,the board works extremely well when benching cold memory's

  23. #848
    Registered User
    Join Date
    Sep 2012
    Location
    BIOS
    Posts
    68
    I was able to improve my time.





    Better result are with ln2.

  24. #849
    Registered User
    Join Date
    Jun 2008
    Location
    Germany
    Posts
    15
    what kind of RAM you are using




    edit:

    u22 - 6:06:782 - 50x100.1 - 1200.1 MHz -8-11-8-28 1T - Z87M OC Formula - 2x2 GB Corsair Dominator GT 2133C9 (PCS-X) - 1,8V - CPU SS / RAM Air
    Last edited by u22; 12-22-2013 at 10:18 AM.

  25. #850
    Registered User
    Join Date
    Sep 2012
    Location
    BIOS
    Posts
    68
    F3-12800cl8d-4gbtd psc

Page 34 of 36 FirstFirst ... 24313233343536 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •