Choosing DDR3 Memory on Ivy Bridge

[Neyasit]

Hi guys!
Now choose a memory to participate in the MOA Class "B".
May suggest that the take of the following:
G.SKILL F3-17000CL9D-4GBXL
G.SKILL F3-16000CL9D-4GBRH
G.SKILL F3-12800Cl6D-4GbPI
G.SKILL F3-12800CL8D-4GBRM
G.SKILL F3-16000CL9D-4GBRM
G.Skill F3-12800CL9D-4GBXL
Patriot PGV34G2000ELK
Will there be anything better than my Samsung 2666 10-12-12-24?

[Don_Dan]

In short:
No
Only if you find a very good kit and cool it with LN2
Only if you find a very good kit and cool it with LN2
No
Only if you find a very good kit and cool it with LN2
No
No

In my opinion your 2666 CL10 kit is better than all of those options.

[Neyasit]

Don_Dan, thanks a lot . Can you advise what should look for?

[Calathea]

Neyasit, those corsair platinums are very good. For spi32m you can easy bench 1333 9-12-12 at around 1.8 vDIMM, and more if you are willing to go nuts with volt. 2x2 psc and bbse is really only good if you have bad IMC/mobo/bios and can't run 1300+. Also with haswell 1400+ ram will rock.

[Neyasit]

Calathea, If I had these Сorsairs, it would be cool, but I have exactly the most common Samsung DH0 for about 20$ per kit

[Neyasit]

there is another one kit i wach:
KHX2133C9AD3X2K2/4GX It seems to be Elpida BDBG-DJ-F there. It's good or not?

[Don_Dan]

Don_Dan, thanks a lot . Can you advise what should look for?

Calathea, If I had these Сorsairs, it would be cool, but I have exactly the most common Samsung DH0 for about 20$ per kit

I thought you had a Dom Plat or TridentX 2666CL10 kit as well. You mean you clocked some OEM Samsung sticks to 2666CL10, right?
In my opinion a good Samsung kit ( 2400CL9 or 2666CL10 ) would be the best choice for you. As Calathea said you can run 2666CL9 or 2800CL10 with them which should be good enough for 32M.

there is another one kit i wach:
KHX2133C9AD3X2K2/4GX It seems to be Elpida BDBG-DJ-F there. It's good or not?

Elpida BDBG will be comparable to similarly spec'd PSC Xxx ICs, but slightly ( or a lot ) worse, I don't think those sticks would be a good choice for MOA, especially keeping in mind the benchmarks you have to run. Of course you can try them if you can get them for cheap!

[Calathea]

For MOA spi32M I would recommend bbse, even mediocre stuff that does 1200 8-10-7 @ 1.8 volt is fast on Mpower - faster than 1350 9-12-12 because of borken dividers... just like Splave I have not had any luck at all with divider higher than 2400, it's just super slow.

edit: I realise this is quite the opposite of what I wrote earlier, but for MSI mobo I can not recommend samsung.

[Don_Dan]

Didn't know about the MPower's problems with higher dividers, BBSE that can do 1200 CL8 should be easy to find though.