Meet the new Spartans..err Ballistix!

[websmile]

This is not new - I had a lot of rebranded ddr2 Balistix in the past, only with Ballistix symbol and bin (f.e. Ballistix 18F on 1066.FD5), which is missing on the ICs above

[Reefa_Madness]

Yes, they have done it in the past but they haven't been doing it on these newer models until now, at least not that I had noticed.

[Splave]

ALLLLL came as KFR XD


First spreader show D9PSH and some unmarked on the quad channel kit

[xdan]

Well put them on test, each module single.
Best would do 2400 CL 8-8-10-24 1.77-1.80v and 2600 9-9-11-27 and 2800 9-10-13 1.88-1.90v( air).
tRP it's the main wall.
On LN damn 2600 8-8-10 and 2800 9-9-11 would be avesome.

[Splave]

I dont think FKR or etc matters, popped random stick in that had BX and all different numbers on them 2764 9-10-12 1.92v.

Second stick wont boot 2600 at all, but 2500 8-9-10 is fine. Think bios maybe is not well supported on these IC's. 18 more to go

[nachtfalke]

yes, FKD or FKR doesnt matter , i had good stick or bad (much more than good =)) )from both ...

[Splave]

good left, bad right, great top left, strange top right

[Reefa_Madness]

Nice one, Allen.

[XBrytanX]

I should ask ..which sticks can pass 32M tho ( 1400c9) ?,booting with Micron is easier but 32M is another story

[l0ud_sil3nc3]

Awesome nomenclature bro.

I want poop & waza

[Don_Dan]

Nice work, Splave!

What's the highest frequency you can validate regardless of latencies?

[Splave]

Nice work, Splave!

What's the highest frequency you can validate regardless of latencies?

These can do 2840mhz at these timings 1.90v , just didnt do a screen. I would dare say I could max them out yet with how strange the timings like to be set

@Xbrytan bro I didnt bother running 32m...bios is changing my timings that I have set upon boot. Major Major Bios issues. Will try on Asus like alex-ro tomorrow.

@George, Dude I figured the one named bullant would do super tight CAS and 2800+ but it didnt shout out to bull

[xdan]

Splave, so why it's "Bob" module strange?
Seems that the memory isn't that bad, 50% good, 50% bad( if you can say a pretty cheap memory doing up 2400 tight latency it's bad)

Waiting for some LN action...

[Splave]

Bob is the only stick that failed 2600 1.90v but then passes 1.95...all other 2400 max sticks voltage did not help them pass

[jimba86]

you name your sticks depending on how they perform?

I like your thinking..

nice result too..

[Splave]

Actually man I name them before I test for good luck! Check that out, all that I named after 32m are dope!

[Alex-Ro]

Hmm,maybe try 1.60 bios allen?I could memtest mine 2600 9-10-12 with ultra tight whatever timings with 1.72,can run 2666 9-9-10 32M with about 1.82 on asrock.However on asus booting was more consistent on figh freq like 2800.And do name your best sticks alex =))

[Splave]

Lol! Will do man. I prefer high volt testing on ics that like high volts though bro. Will give it a shot though

[Splave]

These must be totall different ics, 1.6v I can't post probably 2000 1.9v they come to life

[Leeghoofd]

how are the 8GB dimms doing?

Non ballistix, but something new soon

[xdan]

Could be this?
http://www.crucial.com/store/partspe...K8G3ERVLD81339

These are also new :
http://www.crucial.com/store/partspe...LS2K8G3D169DS3

[Alex-Ro]

you are ruining this thread,stop with your assumptions,those are not ballistix,also no micron ic's

[rivaldokfc]

I just got 2 sticks of tracer printing 16FKD on them。。。what will happen

[Daveburt714]

Hi Folks,

I just picked up a 16Gb kit of these.
I've been wanting to go with more mem for awhile anyway, and this seemed like the best option to try from what they had at MicroCenter...

I know you guys said the 16gb kits didn't clock as well, but I bought them more for daily use rather than benching (hope it's ok to post here).
They had 2 versions, FER's and FED's. Not sure whether it matters or not, but I got the FED's since that seemed to be the suffix that clocked best on the 8gb kits.

Here's a couple pics:



I won't be doing any Xtreme testing, but I do plan to push them for daily use (keeping <1.7v's), to see how they stack up against my old 8gb RipJaw kit.

I realize this is the "Extreme Bandwidth" section, so if you'd rather I not post results here that's fine, just let me know...
Otherwise, I'll put up some results after a little tweaking.

[xdan]

Post, post, it's utile to know what frecuency, latency 8GB modules can do.
There are so little reviews and information about them and Crucial memory in general.