Meet the new Spartans..err Ballistix!

[Alex-Ro]

Those are single-sided,probably D9PFJ,8 gb sticks clocks far worser,no good for benching,2133-2200 for daily is good though....

[xdan]

Elite 2*2GB 1866CL9 i think this this guy here had it http://www.xtremesystems.org/forums/...=1#post5177375
Clocks and latency are very good but being single sided the efficency it's very low.

8GB LP modules have i think other chips than 4GB, they can do at most 2133-2200 CL 9-9-9-24.

[l0ud_sil3nc3]

I have two dimms that did not come in a kit, 1600 c8 @ 1.35v and the part number ends in 16FKR and I can not clock them much higher than 2300ish, so must be different ic's than in the op, I was hoping for some of those crazy results 2800 c9 but no such luck

[Alex-Ro]

are they normal sized modules?If so,forget about that 2800 c9

[l0ud_sil3nc3]

nope they are lo profile just like yours.

[xdan]

My kits and from what i understant Alex-Ro where all 16FKD not 16FKR....so it might be there are other chips?
Anyway even Alex modules only 2 from 8 did 2800 and only 4 from 8 above 2400.
So you can buy more kits the only way it's bining.

Either way check what chips do you have it wouldn't be a surprise to be othe chips than i and Alex have.
What latency they do at 2300?

[Dumo]

Got these



All max out @ 2400 CL9

[Alex-Ro]

Not good,need 16 FKD.unfortunately all across europe now they got 16fkr too,crucial is playing games with us

[xdan]

Too bad then, it seems that Crucial just throw random chips on random kits...no bining...no nothing.

[nachtfalke]

yep, i have too 16FKR but not good at all- can?t boot 2400 , fortunately i have one kit 16fdk from first stock

[rivaldokfc]

Hi alex，do u know what's the difference between BLT2K4G3D1608ET3LX0 and BLTCK4G3D1608ET3LX0? I found amazon is selling this: http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1 ....are these sticks using different ICs? Just like 16fkd and 16fkr u said above...thx

[rivaldokfc]

http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

[l0ud_sil3nc3]

Grabbed some kits from Amazon, and still 16KFR look like most major retailers are EOL for the 16FKD

[rivaldokfc]

Grabbed some kits from Amazon, and still 16KFR look like most major retailers are EOL for the 16FKD

it is tradegy....

[nachtfalke]

got these yesterday from another store ..same 16fkr

[rivaldokfc]

got these yesterday from another store ..same 16fkr

. Does it mean BLT2K4G3D1608ET3LX0 stand for 16fkr and BLTCK4G3D1608ET3LX0 stand for 16fkd?

[Alex-Ro]

No,they have absolutely no rule for this,it seems it's all about luck,try to find a store with older stock,otherwise 16FKR are very bad...

[rivaldokfc]

ordered 2 sets in amazon...I cannot do anything at this moment except pray for myself....=_=.. Seems it is not possible for us to know the batch of b2c stock...

[Splave]

Want to try these cold, so bought 1 set 2x4gb, 8 sets 1x4gb and 1 set 4x4gb 1.35 low pro 8 8 8 1600 wish me luck

[XBrytanX]

happy benching

[xdan]

Want to try these cold, so bought 1 set 2x4gb, 8 sets 1x4gb and 1 set 4x4gb 1.35 low pro 8 8 8 1600 wish me luck

I hope at least 2 modules to be FKD and work 2600.
With 2v+ and LN, 2600 CL 8-8-10 should be possible.

[nachtfalke]

Hey guys , it seems that 16FKR is not so bad at all
i have here 2 kit?s dual crucial-16fkr, today i decided it must one more time tested before sell them on ebay.
2 modules cant boot 2400 , one can boot 2600 9-9-11-27 with 1.950v but cant pass32m , and one is crazy ..2600 9-9-11-27 , third secondary and tertiary timmings, with only 1.880v...this stick its very hot , ambient was 28degrease..
so , if you buy dual channel kit ..need tested each of them separately.. it?s time to binning micron

[Splave]

^so happy to see this

[nachtfalke]

naked 16FKR

[Reefa_Madness]

So now Crucial is hiding the chips they are using in their modules? What's wrong guys...aren't you proud of your Daddy's (Micron) product?