.....................
.....................
Last edited by testman78; 09-23-2014 at 07:13 AM.
For what it is worth, I use one on a micro-ATX (Maximus V Gene) board with TALL G.Skill Trident X RAM sticks with no clearance issues by moving the fan to the middle and the other as "pull" out the back of my mid-tower Arc Mini.
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
If you get a chance you should test using Cougar CF-V12HP8 fans.
Little noisier than the noctua fans at full speed but they move and direct air pretty good and you can slow them down easily, i'm hooked on them
All along the watchtower the watchmen watch the eternal return.
i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770
Would there be any drop in performance if I place the fans in pull orientation instead of push orientation? I have Corsair Vengeance RAM, and I would rather not remove the heatsinks if I can get through without doing so.
Also, I have someone confirm that it fits fine in Raven RV03 case. Is that actually true? Further, would the fan orientation have an impact on this particular case?
Very nice I bought a used one and will install on my socket 1155 3770k sooner or later.
Any comments on the thermal paste?
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
I own this cooler..is there a mb compatibility list? I am looking at getting a z77 board
Bookmarks