Swiftech H220 Complete Review Part # 1 of 2

[chispy]

Swiftech H220 Review

Introduction:

Swiftech is a company that has been in the hardware cooling sector for around 20 years fullfilling the needs of an ever growing computer enthusiast and novices alike croud with the desire to go for better than stock cooling on their hardware , with such a vast experience under its belt they accomplish a task no other company has done before , yes that's right the have bridge the gap between the all in one liquid cooling closed loop kits and the do it yourselves customizable kits , a huge milestone accomplished by Swiftech that will change forever the way you look at the all in one closed loops kits available on the market.

This is where the Swiftech H220 comes in , an all in one liquid cooling closed loop that is completely upgradable and fully customizable to your needs. An easy to install , completely pre-assemble , pre-fill for you all in one closed loop liquid cooling kit , very easy to install and to work with. For novices and for enthusiast the H220 offers the best performance available as of now in the market beating each and everyone of all the competitions all in one closed loop liquid cooling kits available , the competiton for this H220 are mostly made by Asetek or Coolit in the form of preassemble all in one closed loop liquid cooling kits. The big advantage of the New Swiftech H220 it's all in the quality of the components used to build up this kit , *Powerful high flow pump made in house by Swiftech with their own secret sauce wich is 5 times more powerful than those used on the competition made by asetek or coolit , *Big heavy high performance 240mm cooper radiator , *The legendary Apogee drive cpu cooler water block , *Powerful and silent 2x Helix 120x120x25mm fans with great static pressure and pwm controllable rpm speeds , *3/8 ID very flexible tubing size. But there is more , here is where the H220 obliterate all the competition , the H220 its fully customizable and upgradable , yes you can open this H220 closed water loop all in one liquid cooling kit by simply unscrewing one little screw on any of the 2 conections in the water pump , add some 3/8 ID tubing and you can attached your video card watercooling blocks , chipset watercoling blocks , add more radiators , endless configurations really , you can get very creative with it. All this while been completely silent. You get all this for only $139.95US Dollars and comes with a 3 year full warranty for your peace of mind , the H220 has a MTBF (mean time between failure) of 60,000 hours due to his high reliability and high quality components


Technical Specifications:
http://www.swiftech.com/h220.aspx

Specifications
1 Radiator
Material Brass tubes, louvered copper fins
Body dimensions 269mm x 128mm x 29mm
Fill-port thread class G 1/4
Reservoir capacity 90 cc
Barb fittings Integrated swivel 90? elbows, 3/8" (10mm) OD
Installation hardware •Standard: (8) coarse thread fans screws
•Alternate: (8) 6-32 x 1 3/16 (30mm) philips screws

ROHS Compliant
2 Pre-installed Fan
Dimensions 120mm x 120mm x 25mm
Speed control PWM
Speed range 800+/- 25% ~ 1800+/- 10% RPM
Airflow range 24 ~ 55 CFM
Static pressure range 0.53 ~ 2.29 mmH20
Noise level range <16 ~ <33 dB/A
Nominal Voltage 12 v
Nominal current 0.2 A
Bearing Type Z-axis
Connector Mini 4-pin
MTBF 60,000 hours
ROHS Compliant
1 Waterblock with integrated pump
Cold plate material C110 copper
Cooling engine 0.25mm x 0.25mm micro-pin array
Barb fittings Integrated swivel 90? elbows, 3/8" (10mm) OD
Installation hardware •For Intel LGA 775, 1155/56, 1366
◦(1) Adjustable back-plate
◦(4) Spring loaded screws & washers
•For Intel LGA 2011
◦(4) Spring loaded screws & washers
•For AMD AM2, AM3, FM1,FM2, 939
◦(2) Pre-assembled brackts & spring loaded screws
◦Bracket installation screws

Speed control PWM
Speed range 1200 ~ 3000 RPM
Nominal voltage 12 v
Nominal power 6 W
Bearing type Ceramic shaft, PTFE bearing
Connector Mini 4-pin
MTBF 60,000 hours
ROHS Compliant
2 Tubing
Material PVC
Color Black
Dimensions 5/8" x 3/8" (16/10mm)
Length 15 3/4" (400mm)
4 Clamps
Material Black anodized aluminum
1 PWM splitter
PWM Ports 8
RPM signal port Channel 1
Power connector Molex 4-pin
PWM/RPM connector Mini 4-pin
Installation hardware Peel-off sticker, mounting screws & nuts
ROHS Compliant
1 Tim-Mate 2, 1g serynge thermal compound