[XS] GTX TITAN Owners Club

[CryptiK]

Pretty sure I've found the power limit string in the bios, there's the 100% board power string (250w) and just after it the max board power string (265w).......There's another limit of 105w in there too, not sure what that pertains to. But do I have the balls to edit it, flash it and test it :/ I don't think so lol I'm just teaching myself hex I am not 100% confident it'll work and without a backup bios like on my lightnings flashing it worries me. Shouldn't be long until this is sorted though, someone will be prepared to risk bricking a card to test it.

[CrazyNutz]

Nice cards

Post your bios man, i'll get to examining it. Then we'll find a sucker to flash it

UPDATE:

Half way there, just need to work out voltage & boost

[cowie]

Good luck with that.

The best bench for these cards 3d vantage

[CryptiK]

PM me your email I'll send you my bios.

offset 8DC0 over to 8DE0 is where the max board power limit is from mine

Nice cards

Post your bios man, i'll get to examining it. Then we'll find a sucker to flash it

UPDATE:

Half way there, just need to work out voltage & boost

[CryptiK]

1084 MHz looks to be about max game stable clocks on default voltage. Haven't over voltaged them yet I dont feel I need to with this much power lol

[CryptiK]

Whats everyones max stable Valley @ Extreme HD preset clocks using +37mv (1.200v)?

Mines on air cruising through at 1163 MHz.

[aussie-revhead]

See if you can hit the same hard limit tht c-buzz has at 1202...

[CryptiK]

Nah both mine hit 1228 before crashing, not sure if they'll go higher.

[pinto]

1st test in aircooling

[LostHawk]

Even around 1000 it still performs well if you can find a cheap aio unit like a h60 or whatever it would be almost as good.

Yes, it's a bit silly not to overclock a Titan when it's even advertised for that.
After playing with both Asus gpu tweak and Afterburner, I came to the same conclusion/results than Guru3D in fact...
My gpu is at around 1136MHz now and memory at a safe 6242MHz (leaving more power for the gpu too).
Edit: Stability tweak - GPU Boost down to 980 now giving around 1110MHz. Other settings unchanged.

[solofly]

Nice cards and nice thread guys...

[cowie]

Alittle vantage


Need more cpu

[aussie-revhead]

Can you increase the available software limit on gpu clock? So you can hit the gpu limit not the software limit?

[cowie]

1187 is this cards limit atm.

[pinto]

nop, did you see my post? I reach 1200 in 3D11

[tool_462]

nop, did you see my post? I reach 1200 in 3D11

Is it 1187 in the utility but peaking up to 1200? I haven't read much about this card yet, can't afford it

[emertX]

Alittle vantage


Need more cpu

Just tell me your driver setting bro!

[cowie]

nop, did you see my post? I reach 1200 in 3D11

Everytime it goes over 1187 it will crash,so you are telling me its software cant go that high?

Its not the card thats at its limit it the software?
please do tell

Just tell me your driver setting bro!

Lod 15,high performance
shtty os anyone should reach that gpu score np with sb ib sb-e around 5.0

[emertX]

That's my problem...my cpu can do 5350 so i need the right settings!
My card runs also faster...so i must be higher than you!

[cowie]

here read this
http://hwbot.org/forum/showthread.php?t=61804

I cant find it now but 680 tested with all sorts of lod settings posted from an xs member on a site,try google its a good read.
But you should give it a good test its not same as 680 lod setting
Few 1000s is what you should pick up

here i found it
http://www.ocaholic.ch/xoops/html/mo...l_lang=english


Would be nice to see the green army come out in force in this one.
What the heck else are you going to do with a 12ht cpu 3d11?.... yawn

[NEOAethyr]

Everytime it goes over 1187 it will crash,so you are telling me its software cant go that high?

Its not the card thats at its limit it the software?
please do tell





Lod 15,high performance
shtty os anyone should reach that gpu score np with sb ib sb-e around 5.0

Lol you're cheating your 3dmark .

I see you figured out the lod bais setting needs traa set to sparse grid ss in order to use lod settings.
Works in dx11 too .
Btw, you don't have to do override, you can do enhance and it'll still work and allow you to use the game's/program's aa if you want.
And after that, if you have the extra speed to go around, you can override and do your own method of msaa along with the spares grid tranparency stuff.

Set max prerender frames to 255 when you're benching, it might help a tiny bit.
On gaming keeping it 0 for min input lag.

[emertX]

here read this
http://hwbot.org/forum/showthread.php?t=61804

I cant find it now but 680 tested with all sorts of lod settings posted from an xs member on a site,try google its a good read.
But you should give it a good test its not same as 680 lod setting
Few 1000s is what you should pick up

here i found it
http://www.ocaholic.ch/xoops/html/mo...l_lang=english


Would be nice to see the green army come out in force in this one.
What the heck else are you going to do with a 12ht cpu 3d11?.... yawn

Only 15300 points...with my 7970 and ivy it has been 15700!

Gesendet von meinem GT-N7100 mit Tapatalk 2

[bmg]

We badly need to be able to boost max power above 265. Even with no voltage boost and only running at 1097mhz the throttling can be bad. Vantage shows it easily...gpu-z (or precisionX) monitoring shows peak power hitting 107.2% and quickly throttling back voltage and frequency. I haven't bothered playing with my video card bios for a couple of years (back in the 580 days), but Titan is really crippled by the 265 max power, so I'm hoping the power can be tweaked up at least a modest amount.

For now max power is all I care about, boost voltage and frequencies are ok (at the moment at least). Hm...do I have the guts to hex edit like I used to do in the old days, fix the checksum and flash? I wasn't playing with a $1000 card back then, although I did forget to fix the checksum once and temporarily bricked my video card (easily corrected and fixed fortunately).

I've dumped my evga Titan SC bios with gpu-z if anyone can use it. (PM me your email if you want it.)

[emertX]

Jep...me!

[CryptiK]

bmg I've already found the strings controlling the power limit. Should be something available soon to increase this. I wouldn't push it over 300w or so though the ref vrm's look to be able to handle 350-400w max