[XS] GTX TITAN Owners Club

[cx-ray]

Just ran a single card test loop on water. There's no throttle. Never really had the prob, but there used to be dips when the render engine would stutter. Not sure whether it's the latest 314.22 driver, lack of SLI, or just the lower temp.

I ran the same settings that I had on air. Stock GPU BIOS voltage set to max in Precision, GPU 1150, and RAM at stock. I haven't pushed anything yet. Just making sure everything works.

Hey mate, did your blocks fit is described in the instructions? Did you have a problem with any of the screws?

:-/

I only notice a little jamming on one of the backplate screw holes. It's probably due to the black coating on the threads. I just threaded a screw in the hole prior to installing to get rid of the debris.

[mbreslin]

Just ran a single card test loop on water. There's no throttle. Never really had the prob, but there used to be dips when the render engine would stutter. Not sure whether it's the latest 314.22 driver, lack of SLI, or just the lower temp.

I ran the same settings that I had on air. Stock GPU BIOS voltage set to max in Precision, GPU 1150, and RAM at stock. I haven't pushed anything yet. Just making sure everything works.





I only notice a little jamming on one of the backplate screw holes. It's probably due to the black coating on the threads. I just threaded a screw in the hole prior to installing to get rid of the debris.

What did you use to test? Not every benchmark/game brings out throttling.

[cx-ray]

I tested Heaven 4.0, Valley, and walked around a bit in Crysis 3. That's all I could muster on my test bench with an Ms 1.0 mouse

[mbreslin]

I can run valley with no throttle on stock bios both cards at 1163 but 3dm11 brings it out. It's perfectly possible you have a good card that doesn't throttle but I would make sure with 3dm or fc3/more crysis3.

[cx-ray]

Just ran 3DM11 Extreme benchmark. Clocks only appear to dip during loading of a new scene or during the physics part.

[mbreslin]

Looking good, time to step it up to 1163?

[cx-ray]

[mbreslin]

Looking good! Now trade me since one of mine sucks.

[CryptiK]

Those not smooth lines in the freq graph for tests 1 & 2, they are not showing holding a flat MHz through the tests.

Hey mate, did your blocks fit is described in the instructions? Did you have a problem with any of the screws?

:-/

Apart from a couple loose standoffs they were fine. What's happening with yours?

[aussie-revhead]

Apart from a couple loose standoffs they were fine. What's happening with yours?

You know all the tiny screws that you remove to take the factory cooler off? Well, one of the threaded holes in the water block, for the four main screws around the gpu core, was tapped in that tiny screw size, not the M3 size that the supplied M3x4 screws fits into .... very weird but it is working so ....

and why does the new afterburner not allow me to change vgpu or monitor it? Yes I unlocked voltage control and unofficial overclocking ... did I miss something?

[cx-ray]

Those not smooth lines in the freq graph for tests 1 & 2, they are not showing holding a flat MHz through the tests.

It's possible that's where the max power was exceeding 106%. Regardless, I'm curious whether the new driver had an effect. I'm not able to confirm, because none of my cards dipped during regular loads in the past. Not all users were that fortunate. Some saw large drops in frequency, even though all parameters were within usable range.

[cowie]

nah its not driver,you need to play with the bios to get that fixed for 3d11...if it bothers you.

[Jonik]

Core i7 3930K@ 4500 МГц
GTX Titan SLI@ 957(1084)/1652 МГц 314.21
P23440

[CryptiK]

Nice man

[cowie]

Try the bios in this post jonik
http://hwbot.org/forum/showthread.ph...606#post233606

All same 2d 3d voltages as stock card 1.23v without moving the slider.
good for 3d11 it will flat line clocks for you = more gpu points same clocks

Some ss bfe
titan is 1200+ np 1.26v
maxxed settings is hard on any system even with just one 1080p monitor
I can gain some fps by just turing down msaa and some others but i dont

http://www.youtube.com/watch?v=Apr3KHdQUS4

http://www.youtube.com/watch?v=cSCOghYW-pQ

some bf3 wake action too
http://www.youtube.com/watch?v=NywvavGee-I

[aussie-revhead]

Cowie - I just tried that one, it gives me 1.212v and no better clocks (still 1228 best)

[cowie]

Then your ready for more voltage

[aussie-revhead]

hahah yeah I am thinking about firing up the soldering iron ....

[.::NeO::.]

2x Titans owner here Can't wait to watercool those babies and start to play !



Uploaded with ImageShack.us



Uploaded with ImageShack.us

[andressergio]

2x Titans owner here Can't wait to watercool those babies and start to play !



Uploaded with ImageShack.us



Uploaded with ImageShack.us

congrats on the babes !!!

i gave maself a nice present also before my surgery sorry to post on the wront thread but i want to show

3DM11 at 1280 core +700mem wich i run daily so the CPU at 5GHz HT




the cards...







hope u like it

cheers to all and enjoy the toyz
Sergio

[aussie-revhead]

Sergio - all three do 1280 on air? Your a lucky bugger, mine on water does 1228 max and only marginally stable at that .....

What is your utilisation like in BF3?

[andressergio]

Sergio - all three do 1280 on air? Your a lucky bugger, mine on water does 1228 max and only marginally stable at that .....

What is your utilisation like in BF3?

hey aussie yes they do solid 1306 also but need bit more volts so i prefeer 1280 +700 except 3rd card that dont likes over +550

im playing BF3 right now its like 33% to 55% depends on map but BF3 dont consume very much but Project Cars with the new AA methods oh man it eats like 66% to 77% of each all maxed and looks beautiful and smooth
Crysis 3 also eats 55% and more if i run MSAAx8 wich i can now
also i dont have any throttle with middle card runing 86C

i will up some screens if im allowed on this thread

btw you have same cards ? cauz this are binned at 1267 already

cheers !
Sergio

[aussie-revhead]

What brand are yours? Mine is a Gigabyte but I have tried every bios I can find, thats the best she will do.

If you ever want to sell one please let me know.

[Toolius]

Mine just came in tooo









Cheers guys !! hope they dont throttle

[andressergio]

Mine just came in tooo









Cheers guys !! hope they dont throttle

Congrats mate !