I have better around 2600-2700 than with 2200 .
I have better around 2600-2700 than with 2200 .
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
Welcome back Oliver, nice to see you again. =) I don't come around much anymore myself, but very nice results with AMD on air.
Formerly XIP, now just P.
I will give it a try, most likely today. I have not been around at the weekend (as you might have noticed, sorry).
Look who is also still here. Unfortunately and to be fair, I have to call it water cooling which uses air, but still, it's way better than just plain air cooling. I wanted to text you the other day, but had to run - will do in a bit, so be scared xD
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
The AMD section has been dead all weekend, i wonder where all AMD enthusiasts have gone.
This FSB thing is driving me nuts. Tried bios 1002, 1101 and 1201, all were the same. Tried booting at 270, with ram, ht link and cpu-nb all turned down low and tried to raise FSB in windows with TurboEVO but it gave me a BSOD when i wanted to press apply at 280.
Curious to see if your board can do high FSB.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Cannot quite figure out why you want to raise the BCLK in first place, however C5FZ is good up to 340MHz++ BCLK.
Cheers The Stilt.
No idea why i want that myself but i guess i was exploring the limits of the board. Up till now my last 3 Crosshair boards all went 300+ except for this one, maybe that's what's bothering me. At post it makes it till the VGA debug LED together with Q code C5 and then it starts over again.
Just wondering why.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
ht voltage? PCIe clock?
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
The Stilt beat me to it
Quick test with 24/7 voltages in 5MHz steps, booted with 270MHz:
I hit 320MHz, 325 crashed, at room temp without tweaking, so I am sure I could get more out of it, if ever needed...
My volts:
VCore: 1.4V
CPU HT NB: 1.275V
VMem: 1.65V
NB voltage: 1.225V
NB HT voltage: 1.3V
Other settings on "auto"
BIOS 1201
PCIe: 110MHz
Last edited by Fr3ak; 01-29-2013 at 01:00 AM.
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
We can be happy, Stilt dont fight with us in Cinebench R11.5 . His cold air could be winner . We had awesome cold at Firday, -17.5C outside, but unfornately, I was sick. Cant open window for my health condition
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
An awesome paper launch from AMD.... again.
-
Zeus, did you try loosening trfc? Also, do you try with both cards running?
I had to change trfc from 110ns to 300ns on my C4F in order to boot past 275+. Got it to 345, but it freezes just before it hides Welcome screen of Windows 7.
This HD7850 is very picky when we're talking about pci-e clock, so it might be part of the problem.
Didn't play much with it, but will do when I have some free time.
Last edited by I.nfraR.ed; 01-28-2013 at 04:16 PM.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Ivan my friend...i owe you a big beer!
300ns did the trick! I would have never ever looked into that myself, thinking trfc is a completey memory related setting. I guess not.
Just tried 320 with no changes to any voltage whatsoever and it booted straight into Windows. To see if it was stable i ran 10 passes of IBT and it completed without errors.
No need to see what i can achieve here, it's just that i couldn't get it over 270 that made me wonder.
Thanks everyone for helping. Guess i unintentionally found a way of derailing your thread after all Oliver.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Guys, can anyone reveal a physics score in 3D11? Im curious to see how these go, shame its being launched in the shadow of haswell .... good luck to AMD on this one....
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
This is one of the keys for high HTRef with e.g. Sempron on DDR3 motherboards.
Some boards reach 350MHz with tight/normal timings, but past that need fiddling with trfc and memory/IMC related settings.
Did 452MHz with Thuban on M4A89GTD this way.
So that was the first thing I tried and it worked. Anyway, you don't need it for unlocked chip, but is very valuable for low-multi locked chips on LN2
Appologies to Oliver from me too.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Intel 5960X@4.2Ghz[Prime stable]@4.5 [XTU stable] 1.24v NB@3.6ghz Asrock X99 Extreme 3 4x8GB Corsair Vengeance@3200 16-17-17
Sapphire nitro+ VEGA 56 Samsung SSD 850 256GB Crucial MX100 512GB HDD:WD10TB WD:8TB Seagate8TB
hehe Zeus, I was about to mention it, but that is totally fine by me. Nice, you figured it out
Reminded me of this "gem": http://www.xtremesystems.org/forums/...and-417-MHz-HT
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24
AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw
Hardware enthusiasts want hardware that performs at enthusiast levels. AMD fell behind for too long, it's hard to get excited about parts that reviews all over the web are showing have real issues with gaming.
They basically ran out of "I'll buy this to support competition while the other people get better CPUs".
Intel 990x/Corsair H80 /Asus Rampage III
Coolermaster HAF932 case
Patriot 3 X 2GB
EVGA GTX Titan SC
Dell 3008
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
I have new memory on the way, so fingers crossed it will clock well on AMD without having to solder on a Intel IMC, haha
My multimeter should be here by tomorrow, so I can finally doublecheck voltages and while I am at it, I will swap PSUs just to make sure my current one is not limiting me for whatever reason. Well, then, there is basically nothing left to do for me after I found the limit of the memory and the rest of the 123 settings, so I can go subzero in order to make a huge fireball out of the carefully collected components
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
Thanks for the info.
FX 8320 4GHz@1.3V
Antec 920
Sabertooth 990FX
32GB Kingston 1333
Asus 5770
Dell 2405FPW
2x Seagate 2TB
CWT 750w
Maybe other programs running. I use real-time setting for cinebench in applications/processes. You wont see the progress and may think program has locked up but its not and scores are more consistent and of course higher
1. ASUS Sabertooth 990fx | FX 8320 || 2. DFI DK 790FXB-M3H5 | X4 810
8GB Samsung 30nm DDR3-2000 9-10-10-28 || 4GB PSC DDR3-1333 6-7-6-21
Corsair TX750W | Sapphire 6970 2GB || BeQuiet PurePower 450w | HD 4850
EK Supreme | AC aquagratix | Laing Pro | MoRa 2 || Aircooled
Bookmarks