K.3nny's TopNotch Phantom 820 Casemod

[k.3nny]

New build new changes

Thnks to NZXT HQ for this case: NZXT Phantom 820 Gunmetal.

Gonna strip it down, tear it up and design and build a better one in my style.

Originally







Stock, It isnt my style, to futuristic, Gonna flip it all over,go the clean route and Do my thing.





Flipped motherboard I/O is on the upper now.







I need a clean top panel now, gonna leave only the mesh part stock, the rest will be cleaned







See u with the next update

[miptzi]

hardcore stuff...
nice.

keeping my eye here

[k.3nny]

Thnks, Il try to do the best i can

[k.3nny]

Update

Cutted the top


Created a sheat of alu to be the new top plate


Mounting holes


More holes :P


Fits like a glove *thats flush !






Time to mark al the holes and cut-outs


See u at the next update !

[k.3nny]

Parvum commin to an end almost (or not ) but progress was needed!

Did some things today

2x Gtx 470 incl all EK assecoires, littlte older then people wanna see in buildlogs, but hey, Low budget = me








I will make Custom tops for the blocks

Did also some work on the case, finished the top (the big works) and pop rivited the whole chassis!













Gonna create my own feet and gonna remake the back panel, also goin to remake the whole inside!

[k.3nny]

Update

Few days back i had allot of scrap plexi, (thanks to father in law ) normally would take 1.5mm alu, but hey, some quality plexi is also a good thing !





















Need to wait on some rads who are still in production soon i wil buy 6pumps/tops: http://www.highflow.nl/pompen/andere...ion-13154.html + http://www.highflow.nl/pompen/andere...top-13136.html . (dual loop)
Because i can u know :P just some crazy ass loops!

2loops

Loop1: RES-3xPUMP-360(backpanel )-GPU-GPU-RES.
Loop2: RES-3xPUMP-360(frontpanel )-CPU-MEM-RES.

[k.3nny]

Update !!

Custom front door, Gonna weld the grill into the door








Also gonna weld this under airfilter handle thing into the front:






The front will be made in one piece, i am going to weld the door also, Clean as a Muttertrucker

Also did mounted all the plexi panels because one of these days my rads will come with the mail i needed to be sure it would fit the 8CM!(yes 8!) thick rads











Hardware test fit, so i cant make a mistake with the rads




see u on the next one.

[k.3nny]

Update!

Did allot today, alle the panels are done! (exclusive the rad cut-outs)

NOTE! some pics are edited, Some parts i cant show! (secret stuff )

Starting with the hardware AGAIN in the case, so everything get the fit as is should!


Mounted and drilled everything for the panel support and connection.


Rad support 1




Rad support 2


Midspeed triebs <3


getting everything lined up and test mounting it!






also i figured out how to connect the first line of 3 pumps, so i could make the support and the connection tabs








See u soon on the next update

[k.3nny]

Update!

Finished the pump connection plates






3 little pumps !




scrollsawed the radiator holes, and a notch here and there






All sawed panels


See u guys at the next update

[k.3nny]

Update

Played a little with the pumps, Think this is is the final outcome, i got plenty of room so thats not the point, but i dont want to hide them, i know its cleaner (always when you hide stuff)






First Panel is done ! realy glad with the results.








Gonna be alllrighty

[k.3nny]

update !

Finally i can tell about this haha !

Thnks to Freddy (Highflow.eu) that gave the opertunety to work together with martin (The Feser Company) Jeej :thumb::rock:

picss:






Fittings displayed


3/8th hose Uv green


HF admiral sidepanels






First pumps connected and test loop thingy








first loop




other 3pumps waiting


both loops done.










*note, loopscan be changed
See u on the next one !

[Elder]

Wow...looks superb

I'm very curious about the results of the flow
so unusual pump system.

[ying]

How this admiral rad works? are what they promised?

[k.3nny]

After a week hard work, the inside is almost done, i can focus more on the outside now

Picsss

















1 uv led <3 just for fun


I like this picture allot haha !.


Custom door, i welded the 2 pieces toghether.






Window.


leds on 12 volt, gonna be 7 volt finally

[AH64]

Absolutely sick - I wish i had time and patience to do these kind of projects!

[k.3nny]

thnks mate just take the time

[k.3nny]

4 days to go for the deadline,

need to buy the paint and even paint the case itself, aii That stress haha!

top and front are done, will look good when painted!









Weight (kilo)


lightning

Irl the pumps are not that bright!

[subzero 1979]

very clean work mate

[k.3nny]

Thnks !

[C4B]

Really love how you managed your tubes and those pumps. Good job Kenny!

[k.3nny]

Thnks thnks ! still not done

[k.3nny]

Full custom parts, RVS tubing unique style.



























A little bit unique isnit

There are all loose pieces, and cutted from a RVS pipe, the diameter is 13mmID

Using is pretty simple, Full hoses, or only the sight, maybe even only tagging it with an emblem, no problem! will let you guys know more soon!

[emir]

That is a whole new level in tubing. Well done.