[Case Mod] Li^2 By St0ned

[st0ned]

Hello everyone! I'm here to present a new case mod I'll be doing. This contest came at the right time for me, I was looking around for fully black 100% Aluminium cases when I happen to see it.

The PC-7HX fit all the things I was looking for and the plus side was it was Lian-Li case, all my cases are Lian-Li at the moment and I intend to keep it that way. I've my V2000 project almost finished ( just needs to be wired up ) therefore I'll be moving on to the 7HX as soon as the cases arrive, note the "s".



Sponsors:





Hardware:

Motherboard: ASUS Maximus V Gene
CPU: Intel i7 3770k
RAM: Still to be decided
PSU: Still to be decided
GPU: 2x HD7970


Cooling:

Still to be decided. Looking for at least dual-pump a 4x360mm rads.


Gratitude to the following supporters:
- Dave, my best and the hands behind some costum parts I'll be doing and using on this mod.
- Arkangel, a fellow modder and a friend who will be doing some design work and helping me with some ideas.


To start I'll explain my general ideas, I intend to use a custom top and bottom for the case made out of black matte acrylic. The case on the left will be used for the hardware whilst the one on the right will store only cooling equipment.


I'll just leave some renders to give a general idea, once the hardware arrives I'll be taking "real" pictures !

[st0ned]

Just some stuff I've been experimenting with

[st0ned]

Back render



I got this FC5 as a RMA replacement from LAMPTRON

[k.3nny]

Is going to be a BIGGG case !

Would love to see the progress of this one !

[st0ned]

Thanks mate good luck for you project too !

Well it isn't that big, ~420x473x490 but overall having twice the width will help me storing even better goodies inside !

[B-Shot]

There is only enough rad for cpu and mb...what you gonna use to cool the gpu's?

lol jp looks like a bad azz start to a sweet build.

[st0ned]

Keeping jokes aside I'm open to suggestions for MOAR rads

[st0ned]

What do you guys think of this look ?



is it to much ? In my opinion I liked the end result

[st0ned]

Stripe on or stripe off ?



Btw sorry for the overwhelming amount of renders, cases are still in transit, should be here monday next week

[st0ned]

The last render




Both my cases just arrived from the Netherlands, I'll have pictures by the end of the week, sadly I can't do it sooner since I sold some of my photographic gear and the replacement didn't arrived yet.

[st0ned]

So my cases are finally here !

[st0ned]

Time has been running scarcer and scarcer this days! Well bit a bit I'll have this build done on time! But some new stuff just arrived with the compliments of SuperFlower:


My first video!


And now some photos !

[k.3nny]

Need progresss ! Parts are cool to look at and void warranty

PS, thats just an NZXT hale 90 PSU with other brand on it :P

[st0ned]

Well Superflower is the OEM for this PSUs so... th NZXT might be this one rebranded

EDIT:

I checked the web, nothing to do with NZXT here, for starters this one is Plat vs Gold on the NZXT. The interior also looks different. Maybe it's a rebrand from the golden green 1000W

[k.3nny]

Well Superflower is the OEM for this PSUs so... th NZXT might be this one rebranded

EDIT:

I checked the web, nothing to do with NZXT here, for starters this one is Plat vs Gold on the NZXT. The interior also looks different. Maybe it's a rebrand from the golden green 1000W

ok sorry my fault

[st0ned]

As I sad, bit by bit this will get somewhere

This post is sponsored by

a huge thank you for them !























And this is all for today folks. If all goes well I'll start having my hands dirty !

[st0ned]

Today it was time I got some work done... As far as I'm concerned I'm pleased with the way it went !



Ready to start




.



Read to kill !







Starting to disassemble









An unexpected thing... I'll have to think of something to mask this off...











Removing the MB tray














And then... Lian-li 1 - 0 Drill bit...







Don't forget the original look !







Moving forward...









Time to start making some cuts...















And the final look! I want to keep it as OEM as possible







Time to make a anodized aluminium sheet out of one of the side panels!















Removing the back side of the case !

















Perfect !










If you want to follow the project in motion, we are at youtube with some videos! See our worklog below:

[Snelleedie]

Looking good cant wait to see more.

[k.3nny]

nice progress !

[st0ned]

Well this has been a busy busy day. Lot's of exams at my university so I really went till the end of the dead-line


Reinforcing the case structure:











Some preview of the final look:













Time to fill it with hardware !





PSU in:



MB:



Last minute addition to the MB:




Random Looks:






VGAs Crashing the party:





"The Dark Side"













Final Radiator & WC hardware look !




Packed Up ready to go !





Back to the Goodies !





And the Final Outcome !









I hope you liked it ! Sorry for the mess I had little time to clean up afterwards

It was a really fun project to build ! And I manage to re-use almost every peace of aluminium I cuted out what was even nicer !

[masbuskado]

Nice... 2x times the fun... always wanted to do a 3 in 1 case mod... but I don't have too much space now... maybe some day... clean and neat... keep it up!

[Snelleedie]

Hey Miguel,

I was looking at the waterloop of your case. And I cant see how it works. If I need to follow the loop starting from the reservoir your loop looks like followed. Res, Mosfet, GPU, GPU, CPU, Pump, Pump, Rad and then its stops there is no connection between the radiator in the back and the 2 in the front of the case. I also cant spot any other connection on the reservoir. So how does the water come back in the reservoir ?

First I thought It would come from the fillport on top of the bay res but the opening is to close to the front and with the lamptrom fan controller in the way is it not possible.

Also in every loop U need to place Reservoir first and then the pumps the rest wont matter. Else U cant fill up the loop.

Feel free to post some close ups from the loop. I could be wrong.

[k.3nny]

Wats the bleu thing @ the cpu cooler?

No cpu?

[st0ned]

It's the indigo xtreme Tim. It has a blue plastic around the CPU part. I am on an iPad so it's difficult for me to post photos, but they are easy to find on google.

EDIT: I just went to Lian-Li Facebook and saw all the comments, now I understand the tone of both the previous posts. Therefore I'll just keep quiete until the end of the contest.

[k.3nny]

Oke cool

Never know the refurbished the Indigo