G.skill f3-2666c10d-8gtxd

[andressergio]

31m 046s

great kit runmc mine cant do that

[hiwa]

some quick tests from 2666C10 16GB kit Dec2012



Default 2666 C10 tight timing 1.65 Stock Air cooling ambient 23 degrees (HyperPi Stable)



Max 2720 with 1.65 and Stock Air Cooling



2920 C10 loose secondary and third timings Cold Air ambient 10 degrees







2780 C9 tight timings and stock air cooling ambient 23 degress




8GB 2870 C9 tight 2V for this and cold air 10 degrees



Note: Samsung is not like other ICs when colder they scale ,they stop scaling after 5/10 degrees and when they are too cold start to be very unstable, normal ambient 23 in my room and opened windows 10 degrees they scaled about 90/100MHz and very stable when they are load (HyperPi) no worries about voltages you can go over 1.95 on normal air and +2.0v when colder for benching.

[Reefa_Madness]

some quick tests from 2666C10 16GB kit Dec2012

Is it just me? All I see are pictures of the modules, no test results.

[C-N]

I see the 32M run pic, to me it looks like a stock spd speed 16GB run

[hiwa]

updated the post something was wrong

[Ivanlabrie]

Very nice Hiwa, and good tips for the cold air runs...These hyko ic's are interesting to say the least!

[Alex-Ro]

pretty sure 2666 c10 all use HCH9.And 2V...well i'd call that anything but safe,but if they demand..then we shall comply

[Reefa_Madness]

updated the post something was wrong

Thanks, all visible now. Nice runs. Makes me want to ask...has anyone broken DDR3-3000 with HYK0?

[Reefa_Madness]

pretty sure 2666 c10 all use HCH9.And 2V...well i'd call that anything but safe,but if they demand..then we shall comply

Actually, there have been several pics posted of the "2500" serial number kits with HYK0 ICs. See ihog6hog's post #24 in this same thread for one of those pics.

[websmile]

Mine are sold but still here, maybe I ask buyer if I can give it a try - on safe voltage only made an 1481 c11 validation and Spi 1m, 1,82v. These are indeed much better than their reputation imho, different strengths and weaknesses than my other Samsung, but quite good

[andressergio]

very nice hiwa !!!

[hiwa]

Thanks, all visible now. Nice runs. Makes me want to ask...has anyone broken DDR3-3000 with HYK0?

sure and not single , i did it yesterday full bank 16GB but my CPU-Z version was out of date, will try again next time.

[hiwa]

very nice hiwa !!!

u have to try ur kit a bit colder dude to see the sams magic the nice of this IC is we don't need waste Ln2 on it or even find a way to mount SS on it, Cold Air do the dirty job for us and we are in the right session now

[Reefa_Madness]

sure and not single , i did it yesterday full bank 16GB but my CPU-Z version was out of date, will try again next time.

Nice!

[andressergio]

u have to try ur kit a bit colder dude to see the sams magic the nice of this IC is we don't need waste Ln2 on it or even find a way to mount SS on it, Cold Air do the dirty job for us and we are in the right session now

hiwa my modules are cold not even warm but i didnt give them 1,85 or 1,9 to pass hyper at 2800CL10, i wanted that to be stable and use it but i only can tight 2666Cl10 very strong at 1,7 happy with it tough, i dont think i can run 1,85 for 24/7
besides i think they are difficult for the M5F so far for the M5E piece of cake

[Dumo]

Got 6X4gb of this kit to play next..

[owikh84]

2666 10-12-12-25-1T @ 1.6v



However, 2800 looks imposible, be it C10 or C11. 1.9v, 1.25v, 1.25v
I got Team Xtreem 2600C10 kits that could do 2800 easily.

[websmile]

Quality varies on these obviously as we have seen also here in the thread - my dual kit does 2800 c11 at 1,65v 32M and C10-12-12 at 1,68v, but I also had to test a quad kit on which all four sticks failed 2800 c10 at 1,75v.

[Dumo]

2850 C10



Uploaded with ImageShack.us

[l0ud_sil3nc3]

So tested a new shee pee uuu yesterday and decided to see how HYK0 compares to HCH9.

IMC limited to 2700 ish, cpu on LN2 (-10c) and memory on air, vdimm was 1.85v for the HYKO

[owikh84]