G.skill f3-2666c10d-8gtxd

[andressergio]

some memtest going goood


101.3 x 48 @ 1.336v / 2700 CL10.12.12.26 1T LB6 @ 1.680



http://i.imgur.com/kGeeU.jpg



at this time is beating my 2800 CL11-13-13-35 1T LB6 tight

some hyperpi32

running



stopped

[andressergio]

pushing a lit bit more the CPU

[Ivanlabrie]

Nice! Bet that cpu can go higher :p
These new hyk0 kits are looking quite good, my Samsung lp hyk0 sucked so bad sadly :/

[andressergio]

Nice! Bet that cpu can go higher :p
These new hyk0 kits are looking quite good, my Samsung lp hyk0 sucked so bad sadly :/

Thanks mate

i always been unlucky with HYK0 i wish i can do stable 2800Cl10.12.12. but no

so far its stable like this

[andressergio]

i stood with my fav even nrs

5GHz HT @ 1,472 load / 2666CL10-12-12-26 1T tRFC 128 TSWR 4

[the_real_7]

i stood with my fav even nrs

5GHz HT @ 1,472 load / 2666CL10-12-12-26 1T tRFC 128 TSWR 4

looking nice there man on that 2666 , latency of 28 ns wow , what kind of temps you hitting ?

[andressergio]

looking nice there man on that 2666 , latency of 28 ns wow , what kind of temps you hitting ?

thx man look the RealTemp Screen it was 27,4C in ma Rooom and dont even hit 80C and chip NOT delided

[Ivanlabrie]

Very good chip, or little glue between ihs and die...pure win either way.

[andressergio]

Very good chip, or little glue between ihs and die...pure win either way.

Gracias amigo but i didnt remove IHS as its a cold chip

[Ivanlabrie]

Oh, gotcha...no need for that though, seeing it's a low vcore chip.

[andressergio]

Oh, gotcha...no need for that though, seeing it's a low vcore chip.

yes but u know 5GHz on IVY for daily aint easy i can bench and do lot of stuff at 1,436 but for real stable for all games app all is that

[andressergio]

tight as it says




Uploaded with ImageShack.us



24/7 settings

[l0ud_sil3nc3]

1.85v

[andressergio]

1.85v

Why so many volts l0ud ?

[owikh84]

1.85v

Seems like some guys here having problem running this kit at rated specs.
Maybe the 3rd timing is too tight, resulting in high vdimm?

[websmile]

Quality seems to vary on these kits, but on the run above, I am pretty sure this is because subs are tightened, time is fast for 4 ghz - on auto timings my kit easily does 2800 at 1,68v even on M5 gene, which is imho no good mem clocker compared for example to asrock formula

[andressergio]

Quality seems to vary on these kits, but on the run above, I am pretty sure this is because subs are tightened, time is fast for 4 ghz - on auto timings my kit easily does 2800 at 1,68v even on M5 gene, which is imho no good mem clocker compared for example to asrock formula

i have 2 and first one do as expected but cant tight it and cant do SPI32 2800CL10, second kit i can tight it to hell but again cant do SPI32 at 2800CL10

[andressergio]

Quality seems to vary on these kits, but on the run above, I am pretty sure this is because subs are tightened, time is fast for 4 ghz - on auto timings my kit easily does 2800 at 1,68v even on M5 gene, which is imho no good mem clocker compared for example to asrock formula

yes but thats XP all my friends runing XP dont have trouble doing 2800CL10

[websmile]

I have by chance win7x64 which I installed for country cup as I owed someone a vantage - as the 2666 are pending I took a couple of cheap kingston and found at least on these no difference to xp 32 apart from 7 being slow and I am not liking it very much - maybe you are right on c10, this I might test when I try my 2400c9 platinums on board that has no compability issues like the f..... gene with them - I took safe range voltage to be sure this works but also low enough to see if there is difference, 1,63v on the Kingston

[andressergio]

I have by chance win7x64 which I installed for country cup as I owed someone a vantage - as the 2666 are pending I took a couple of cheap kingston and found at least on these no difference to xp 32 apart from 7 being slow and I am not liking it very much - maybe you are right on c10, this I might test when I try my 2400c9 platinums on board that has no compability issues like the f..... gene with them - I took safe range voltage to be sure this works but also low enough to see if there is difference, 1,63v on the Kingston

i can pass some loops of SPI32 tried till 1,8 still no luck with 2800CL10.12.12. even with 2800CL11-12-12 no luck so far score of SPI32 at 2666CL10-12-12-25 1T tRFC 96 and other tight timmings passes my 2800CL11.13.13.35 GSkill hynix very tight

6:33SPI against 6:37 daily setup

[l0ud_sil3nc3]

Why so many volts l0ud ?

Honestly Andressergio I did not even bother testing lower voltage except this one at 1.65v



1.85v seems harmless to Samsung ic's as well

[andressergio]

Honestly Andressergio I did not even bother testing lower voltage except this one at 1.65v



1.85v seems harmless to Samsung ic's as well

i wasnt mean to tell you that using that volts is wrong, im just surprised with the variaton of OC on this kits i see some ppl 2800CL10 stable i had 2 kits and no go yes i can boot and do things but no go
sorry if i explained wrong

samsung takes nice volts mines are running at 1,7

[hiwa]

Andre seems ur second kit is not bad, ill have a retail kit this week and try some tests as well.

[runmc]

31m 046s

[andressergio]

Andre seems ur second kit is not bad, ill have a retail kit this week and try some tests as well.

no not at all maybe at 1,85 can do 2800Cl10 stable but i wont run that volts 24/7