which one should i get ?
looks dont mater i just want a universal gpu block with low restriction .
which one should i get ?
looks dont mater i just want a universal gpu block with low restriction .
Hello Quattro and happy eid bro.
I went with the Supreme HF bridge edition to cool my 3 GTX680 FTW, bridge edition looks nice and works fine when u connect it with EK SLI cooling bridge.........
intel Core i7 980x, ASUS Rampage III Extreme , Corsair Dominator GT DDR3 2000 CL9 3x4GB , nVidia GTX 680 FTW TriSLI , Auzentech X-Fi HomeTheater HD
Hi, happy eid to you too
nice setup you got there man, i have almost the same hardware except im using two MSI gtx670 PE-OC..
looks like im going to order the last two from FroznCpu .
thanks for your recommendation...
if you dont mind me asking where did you get that bottle of distilled water ?
You should be also aware that Supremacy can only support compression fittings up to 10mm (3/8"), this only applies in case you are not using SLI.
intel Core i7 980x, ASUS Rampage III Extreme , Corsair Dominator GT DDR3 2000 CL9 3x4GB , nVidia GTX 680 FTW TriSLI , Auzentech X-Fi HomeTheater HD
Distilled water for cooling or cleaning?
Distilled or Deionized (UK) or even really good RO water is close enough to use. I'd use my RO from my workplace, a huge system. Our Conductivity is in the low 20's, meaning all the buildup stuff is gone.
I use alcohol and Artic clean to clean chip surfaces, especially on any Vram Vreg etc surfaces. Alcohol will not clean the slimy Tpad stuff off. I also use Sekisui T-tape for any heatsink. Best stuff.
http://www.ebay.com/sch/sis.html?_nk...+8+x1+25+pack+
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
ooh i see i get mine from Medical Equipment shops but they only sell them in 5 gallon !
ya i use Artic clean to clean chips and vram, as for Sekisui tape i see they only come in .14 thickness i ask because some companies like EK use different thicknesses for different parts like vram .5mm and vrig 1.5mm .
Yep, I use what a full cover block maker calls for. But when it's individual heatsinks like in the pic above, Sekisui Ttape is best. And the EK/Koolance/XSPC isn't sticky tape, it's pads, or called Tpad vs Ttape vs Tpaste.
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
Ooo yaa I remember a long while back I used Swiftech vram heatsinks on my sound card they barely stuck on...
thanks a lot for the ebay link, I'll get some and try it out.
Sent from my GT-I9300 using Tapatalk 2
"lacking in quality" is an understatement i only use it for cleaning Rad's ...
i buy Feser Aqua - Ultra Pure Water in bulk from HighFlow.nl.
I ordered XSPC EC6 Clear coolant from frozen CPU but Aramex refused the shipment !
intel Core i7 980x, ASUS Rampage III Extreme , Corsair Dominator GT DDR3 2000 CL9 3x4GB , nVidia GTX 680 FTW TriSLI , Auzentech X-Fi HomeTheater HD
Let's move this to PM before we upset a Mod :p
Sent from my GT-I9300 using Tapatalk 2
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
i have RO water from my work - 9-12 microSm/cm but i doubt that distilled water from nearest gas-station will be good enough
edit: i mean that "simple" distilled water _as good as_ my RO water in loop. i just have accces to RO so no need to buy distilled water...
Last edited by Vetalar; 10-30-2012 at 05:35 AM. Reason: bad english
Still, your money. The difference between your Feser water and distilled off a pharmacy shelf, or Deionized (UK) or really good RO water will make not one iota of diff in a WC loop. It's not a lab making pharmacuticals, it's just a WC loop.
Like a car, the gas we have causes corrosion to pumps/hoses etc. I'm sure you can buy Petrol for $75 a gallon if it bothers you that much.
Just a comparison, but a good one.
Last edited by Conumdrum; 10-29-2012 at 02:34 PM.
All stock for now, no need for more, but it's gonna be soon methinks.
Giga Xtreme 58 mobo i7 965 ES D0 step Corsair 1600 6 gig
SLI GTX470 EVGA
EK HF nickle blue top CPU block (free from Eddie)
Koolance 470 waterblocks
One big loop, two 120x3 rads. Pa 120.3 and XSPC RX 120x3. Swiftech 35x pump with V2 restop. GT AP15 fans.
Banchetto Tech Station
120 GB SSD, and a few other drives.
1000W UltraX3 PSU, 900 watt (1500VA UPS
23.999" Acer GD235hz and 24" Acer H243H
Bookmarks