New Koolance Pump PMP-500

[idleuser]

Anyone got anymore info on this pump? Looks like it runs hot from the highly modified stock heatsinks.

http://koolance.com/pmp-500-pump-g-1-4-bsp

Maximum Flow Rate: 21L/min (5.3 gal/min)
Maximum Head Pressure: 9m (29.5ft)
Motor: Brushless DC
Power Consumption (at max): 38W
Voltage Range: 6 to 12 VDC
Maximum Temperature: 60°C (140°F)
Electrical Connector: 3-pin fan header with tachometer speed signal
Hose Connections: G 1/4 BSP Threads
Weight: 454g (1lbs)

[Vetalar]

38w from 3-pin fan header? interesting!

[TJ TRICHEESE]

looks bad a**

Hopefully someone will review it

[Church]

Imho main showstopper will be what noise levels it has. I somewhat doubt it being miraculously quiet, if for some even ddc / d5 noise at max is too loud, and even more so noise of comparable iwaki-s. If one will have to tune it down to get noise in check, it's performance will go down as well, but then again why get it in first place. It's all speculation though. We have to wait review of someone that already had other popular pumps and will be able to compare them relatively from hands on experience.