Corsair Dominator Platinum 2666 C10&C11

[Dumo]

Awesome chip Viss

[splmann]

@ Viss

same settings and mems





http://valid.canardpc.com/show_oc.php?id=2543292

[Splave]

you know your're bored/out of ln2 when.....





pretty flexible stuff XD

[flesheatinvirus]

Nice..

[Don_Dan]

you know your're bored/out of ln2 when.....

pretty flexible stuff XD

CL7 at almost 1100MHz is pretty nice, what's Vdimm?

You have the C10s, right?

[Splave]

yep c10's 2666, 1.8v. any higher didnt seem to help it just wont go tighter then *-9-9 at that speed

[Alex-Ro]

2666 C10 test runs,crazy memory,will try better in the 5ghz challenge,samsung power over psc and bbse

http://imageshack.us/a/img820/6763/2844.jpg

[l0ud_sil3nc3]

1.85v and a crappy IMC

[Blue Storm]

So much crappy that you need 1.85V for RAM to run on 1400 10-12-12?I can run 1400 10-12-12 with 1.65V only

[Alex-Ro]

1400 10-12-12 with 1.65V only

you sure about that ?

[Blue Storm]

Yep I am http://www.xtremesystems.org/forums/...=1#post5150786 this is 2400 C9 kit and it does 2760 10-12-12-31 1.65V so so stable...also Christian Ney confirmed my results...his 2666 C10 kit did 2500 9-11-11 1.65V HCI-memtest stable and my 2666 C10 kit did about 2560 9-11-11 1.65V did prime stable

[Dumo]

So much crappy that you need 1.85V for RAM to run on 1400 10-12-12?I can run 1400 10-12-12 with 1.65V only

The difference....reaaly tight sub and tertiary timings

[Blue Storm]

Yep it can be...but still it is huge difference

[owikh84]

Yep I am http://www.xtremesystems.org/forums/...=1#post5150786 this is 2400 C9 kit and it does 2760 10-12-12-31 1.65V so so stable...also Christian Ney confirmed my results...his 2666 C10 kit did 2500 9-11-11 1.65V HCI-memtest stable and my 2666 C10 kit did about 2560 9-11-11 1.65V did prime stable

Try 32m?

[l0ud_sil3nc3]

Does it really need 1.85v? Who knows, I just set it to be safe and come on there Samsung they can handle that no problem

[Blue Storm]

Try 32m?

Prime is higher load for memory than SPI 32M...but if you want to know with what freq it can run SPI 32M I am worry that I won't show you because limit of IMC in my 3770K is about 2840 MHzSo I need cold for it

Does it really need 1.85v? Who knows, I just set it to be safe and come on there Samsung they can handle that no problem

Yep that's true

[Dumo]

To make it clear and not to mislead peeps, samsung C9 or C10 won't run 32m @ 2800 10-12-12 1T 1.65V tight subs/tertiaries air, but you can boot to windows even @ 1.625V 2800 and validate.


2800 @ 1.7V

[andressergio]

To make it clear and not to mislead peeps, samsung C9 or C10 won't run 32m @ 2800 10-12-12 1T 1.65V tight subs/tertiaries air, but you can boot to windows even @ 1.625V 2800 and validate.


2800 @ 1.7V

awesome amigo !!!

[C-N]

Dumo just out of interest knowing you have good IMC chips what's the max MHz you have gotten out of your Samsung's.... just booting into windows?

[Dumo]

Heres C-N

[C-N]

That surprises me mate I would have thought your 3000+ chips would have got more. I say this as mine in the UD5H boot 2933 @ 1.725~1.75 ish & I managed to get 2960 to boot into windows but virtually instantly my USB keyboard/mouse would stop working so could never get a screenshot. I just figured this was my chip & the memory could do more but now having seen your results I'm not so sure.....again!!

[Dumo]

This chip won't boot 2933 and max @ 2950ish air, but it can do really tight ram settings.

[emertX]

So you mean, this is the end of the mem: http://valid.canardpc.com/show_oc.php?id=2569404

And not of the chip? Cause...I can do that right here with 1,063VTT and 1.057 VCSSA!
I also got 1464 with 16GB on the board, but a bluescreen stopped me!
So I need to buy hynix, needn't I?

[Dumo]

It will follow your chip's imc

[C-N]

So you mean, this is the end of the mem

And not of the chip? Cause...I can do that right here with 1,063VTT and 1.057 VCSSA!
I also got 1464 with 16GB on the board, but a bluescreen stopped me!
So I need to buy hynix, needn't I?

Who knows!!!

Dumo told me in another thread most of the Samsungs he tested had a hard time doing over 2900. I initially figured as my problems didn’t start until 2940+ it must have been my chip. Strange thing is my Samsungs run 2900 tight just fine so I'm sure there must be more in them.



I'm on the UP7 now which don’t clock memory like my UD5H but even so I still managed to boot 2880 10,12,12 tight last night so there got to be more in there.