Corsair Dominator Platinum 2666 C10&C11

[subzero 1979]

nice memory guys

[l0ud_sil3nc3]

So tested a new shee pee uuu yesterday and decided to see how HYK0 compares to HCH9.

IMC limited to 2700 ish, cpu on LN2 (-10c) and memory on air, vdimm was 1.825v for the HCH9.

[Movieman]

Anyone got 8 of these hanging around that they'd care to send to NH for two weeks?
I'm trying to find out if a bottleneck is in the system,the cpu MC or in the memory I'm using..
No, i don't expect anyone to say yes but I figured what the hell I'd ask!

[l0ud_sil3nc3]

Anyone got 8 of these hanging around that they'd care to send to NH for two weeks?
I'm trying to find out if a bottleneck is in the system,the cpu MC or in the memory I'm using..
No, i don't expect anyone to say yes but I figured what the hell I'd ask!

I have four 2800 c11's I could send your way Dave, the offer is good until I get a Haswell cpu and board

[Movieman]

I have four 2800 c11's I could send your way Dave, the offer is good until I get a Haswell cpu and board

I appreciate the offer..
I found 4-C10-2666's..Need to find 4 more for 1-2 weeks if anyone has them laying around gathering dust..

[Dumo]

I appreciate the offer..
I found 4-C10-2666's..Need to find 4 more for 1-2 weeks if anyone has them laying around gathering dust..

PM addy

[Movieman]

PM addy

[Alex-Ro]

DDR3-3240 done with samsung ic's,corsair platinum 2666 C10@2.05,28 degrees ambient ,will freeze them pretty soon to see what's up....




http://valid.canardpc.com/show_oc.php?id=2836965

[Shiranui Gen-An]

Let's see more Haswell results!

[websmile]

Tests on my board, friend repaired it and now it works - got these mems yesterday together with the M5G, first quick and dirty performance measuring at nearly 30? celsius in my flat
Sticks 1 and 2, a bit weaker than the other two

3+4

[Don_Dan]

1475 MHz @ 10-12-12, very nice mate!

[owikh84]

^^ 1475 C10 dual channel @ 1.616v ONLY !!!

2500 doable

[websmile]

Thanks, but these are still real and not from outta space , one kit needed 1,79V for 1466, the second and better one 1,77v for the 1475v validation - the 1,616v were for 1407 32M^^ I am surprised nontheless, these are far better than I expected

[TaPaKaH]

got a set:

1333 / 9-12-12-30 / 1.76V
1400 / 9-13-12-30 / 1.94V
1333 / 10-12-12-30 / 1.54V
1400 / 10-13-12-30 / 1.67V

failing 1400 tRCD 12 is not what I wanted to see, but at least there is some redemption:

[Don_Dan]

On air?

[Dumo]

New kit @ 3000 air

[l0ud_sil3nc3]

^Great start can't wait to give 4x4 a spin on X79

2666 c10 @ 2.04v

[websmile]

@Dumo Impressive IMC and great result

Old kit on old platform

[Shiranui Gen-An]

Some tests of my own on IB-E with the Dominator Platinum 2800C11 I got from Dumo.

Stock XMP Hyper Pi 32M stable (IMC 24/7 stability test)



DDR3-2933 12-14-14-35-2T Super Pi 32M



I've been trying the 2933 C11 preset in the BIOS but it doesn't look like these can hold those timings at 1.75V.

[Leeghoofd]

Sure it isn't the low VCSSA voltage you are running, I needed 1.35 for 2933C11-13-13 action mate...

[Shiranui Gen-An]

Sure it isn't the low VCSSA voltage you are running, I needed 1.35 for 2933C11-13-13 action mate...

Would changing just the RAM timings necessitate an increase in VCCSA? 2933C12 was fine with 1.25v.

[Dumo]

3100 air with new bios

32m cas10 1T doable @ 3020 ~ 3080 air

3100s must be threshold of air to cold cooling on ram

[The Stilt]

Any idea if the 2666C11 are still using Hynix CFR?
All of the manufacturers seem to have taken the easy way out and moved into MFR (less labour required).
Single sided modules are useless on AMD.

[Splave]

^gskill 2666c11 is samsung I believe

[Leeghoofd]

wasn't here Allen, no matter what couldn't tighten to 10-12-12, neither was able to tighten the tRAS to 24 or lower...