Corsair Dominator Platinum 2666 C10&C11

[TaPaKaH]

^gskill 2666c11 is samsung I believe

I don't know the current state of things (didn't see any recent kits) but 2666C11 have always been Hynix.
CFR vs MFR is a good question, I think that they are still CFR but you never know for sure until you try.

Stilt, what do you need CFR for exactly?

[The Stilt]

I don't know the current state of things (didn't see any recent kits) but 2666C11 have always been Hynix.
CFR vs MFR is a good question, I think that they are still CFR but you never know for sure until you try.

Stilt, what do you need CFR for exactly?

I need to try few things on the newer AMD IMCs 15h, Gen 2 & 3.
The timings are completely irrelevant, however the memory must be able to reach high frequencies (2666+) with under 1.725V.
And the modules must be double sided (2Gbit ICs). Double sided modules with 4Gbit ICs would put too much strain on the IMC.

Basically they will serve as GDDR

[Splave]

wasn't here Allen, no matter what couldn't tighten to 10-12-12, neither was able to tighten the tRAS to 24 or lower...

my fault was thinking 2600 and 2666 c10 are samsung, c11 are not

[Leeghoofd]

Darn even Splave seems human after all

[Dumo]

2666 C10 new batch pcb (top) and initial release batch pcb

[Dumo]

8X4

[C-N]

2666 C10 new batch pcb (top) and initial release batch pcb

Dumo, have you found any difference in OC or anything between the old & new?

[Dumo]

3000+ C9 with new batch on X79 C-N

[tistou77]

Hello

With Platinum 2400 9-11-11 (4x4Go), it is possible to have 2666 10-12-12 at 1.65v?
With a 4930K and Rampage IV Extreme

Thanks

[Shiranui Gen-An]

2666 C10 new batch pcb (top) and initial release batch pcb

I thought this kit was discontinued!

[Splave]

these are kits jake brought to the asus IDF event I believe

[Shiranui Gen-An]

these are kits jake brought to the asus IDF event I believe

Bah, I was hoping they were back in stock so I could snag a kit.

[C-N]

Bah, I was hoping they were back in stock so I could snag a kit.

We still have them in the UK & price has dropped!!! http://www.scan.co.uk/products/16gb-...0-12-12-31-dhx

Don't know what PCB they have but probably unlikely to be the new one.... mine are 50-000087-B

[websmile]

Hello

With Platinum 2400 9-11-11 (4x4Go), it is possible to have 2666 10-12-12 at 1.65v?
With a 4930K and Rampage IV Extreme

Thanks

If your IMC can do it, the mems usually can, my kit did full slots on ivy easily and also 2666 c9 at 1,73v

[Alex-Ro]

Mine are 65-C PCB

[Splave]

just confirmed with jake, the 87 pcb does indeed contain a layer of unobtainium

[Reefa_Madness]

just confirmed with jake, the 87 pcb does indeed contain a layer of unobtainium

lol!

[Alex-Ro]

M6 Impact is crazy good with corsair samsungs,like little lovers i would say,could run 2860 9-12-12 like a boss,2933 stable 2-3 loops on normal ambient

[tool_462]

M6 Impact is crazy good with corsair samsungs,like little lovers i would say,could run 2860 9-12-12 like a boss,2933 stable 2-3 loops on normal ambient

How do you think it would play with the 2133 C9 sticks? I see them for a good price and my Impact is in the mail.

[Dumo]

87-B pcb quad 3060 c9 air with Black board

[Alex-Ro]

How do you think it would play with the 2133 C9 sticks? I see them for a good price and my Impact is in the mail.

Grab them,i see no reason why you will not be sattisfied.Impact has an edge over all boards i played with due to shorter traces.It's a crazy combo,excellent for mini-itx systems and also xtreme-oc

[tool_462]

Grab them,i see no reason why you will not be sattisfied.Impact has an edge over all boards i played with due to shorter traces.It's a crazy combo,excellent for mini-itx systems and also xtreme-oc

Thinking about it...

I'd rather get a 16GB kit since it will be my main rig, but we'll see.

I'm quickly reverting to my old ways of having way too many sticks and far too few slots. Sort of like a Navy submarine.

[Dumo]

2133 C9 sticks?

There a few versions. The one with 9-11-10-27 @ 1.5V is the best

[Splave]

Dumo, you think it can run so high on 4960x because they are inefficient chips ?

[TaPaKaH]

can you get tRCD or tRP any lower than -14-14- at 1530, Roy?