K, so they stepped away and what's next ?
IMG_4752.jpg
K, so they stepped away and what's next ?
IMG_4752.jpg
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Hahaha, it was really 'cool' to meet you in person Leeghoofd
Quite a puzzle with what I wanted with the in and outlets of the multi reservoirs and both loops mirrored.
It became a multireservoir extreme
Measuring the reservoir brackets.
Going to have the tubes to the pump of the left loop in the bottom.
Again happy this part is aluminum.
Done!
And the first tubes.
Also quite a puzzle again with all the small distances.
Pump for the left loop.
Might change this later..
Mainboard done, reservoirs next.
With flasher.
Left loop with flasher.
And just the RGB LEDs
Exiting for me .. first time filling.
And another adrenaline moment for me, first time enabling the pump.
Also need to find another solution for this, now that i'm running 2 pc's I don't need the long sata cable lengths to the raidcard.
Maybe will order other cables later.
Great feeling when you don't have any leaks.
The Mayhems Pastel and red dye additives.
I was warned this could fail with such a big loop
Here I forgot to close one stopfitting after disabling the pump...
Glad is was easy to clean
Adding the Aurora, it was a bit scary at the start.
But got the result I wanted one minute later.
Another exiting moment....
But it boots with the desired temperatures
And a video of the loop, filling and mixing.
Got the Maximus V Formula in.
Only one day to go, so started right away on the second loop.
Meanwhile testing and installing the left system.
Raw fingers of all that tube
Again exiting..
This time premixed before filling.
Mayhems Aurora, cool stuff
But also creepy.
Both loops running.
Because there's a team of helpers ready to get the desk one floor down.. quickly close the panels without any management.
Ready to go!
Later today the migration.
So just curious, but how much is invested in this so far? I mean if I ordered all with my money, what am I looking at for something like that?
Intel I7 920 (4.2ghz)
EVGA x58 Classified 760
Asus 580 DC2
Corsair Dominator GT 6gb
256gb SSD
Michowski, check out the FAQ link in the topicstart
20 hours before I bring the desk to the event
Small reminder all photos are linked to bigger format photos
You can see on the face expression who's stressed
At the right the remains of the little 'incident'.
A filled pc with a length of 1.50m and 80kg that has to go downstairs almost vertically.
My wife taking pics and most of all ... paying attention I don't scratch the wall :P
The fun they had.....
Being relieved.
Temporary on a wooden box so I can do the last adjustments, cable management and installing OS+drivers+software etc.
The rubbertape I used for sound attenuation and protecting the glass panel.
Also filed the weld so the cover fits.
With glass panel.
This was a weird moment for me .....
"Desk ... I am your father"
Awesomeness!!
hersounds powered by 121 % overclocking Machine http://valid.x86-secret.com/show_oc.php?id=220390 - http://valid.canardpc.com/show_oc.php?id=1917405
facebook.com/hersounds
Intel Core i5 4670K @ 4,5 Ghz 24/7 - Galaxy HOF GTX 780 - 8 GB Team Group Xtreem 2666 Cas 11 - 8Gb Avexir Core series 2800 Blue Led - Maximus VI Formula Armor TUF - Corsair Force GT 120 GB SATA 3 - Galaxy Hall of fame 1200 hersounds Limited edition Modular - Antec 620 dual fan mod
Holy jeebers, that is so sweet.
EVGA X58 Classified
Intel Core i7 980X @ 4ghz
EVGA 590 GTX x2 Quad SLI
Corsair Dominator DDR3 12GB PC3-12800C8
Western Digital 150 GB Velociraptor
Corsair AX1200
Asus Xonar Xense
Custom Watercooling
Lian Li Pc-P80 Armoursuit
Firstlook 2012!
It took me 2 weeks to prepare everything for just a 2 day event including taking 3 days off from work ....
Well in my opinion it was completely worth it!
Ready to go! The Friday night before the event.
Inspecting the booth.. oops .. I didn't expect the front side wouldn't be able to show.
Too bad .. too late to change, this way they can't touch any of the buttons.
The first "wtf's" from the ASUS crew
Last minute adjustments so the glass panel will be flush.
Really cool experience, the constructing of an event, 1 big pile of ants
Checking if everything still works.
All just fine
Also finding a spot for something from a previous project. On top was no option cause of bending the glass shelf
This is how I had to leave it behind.
Believe me, this was pretty scary..
Till tomorrow morning!
Quickly getting everything running 15 minutes before the doors open up.
The relaxed overclockers 'Old Scarface' en 'Leeghoofd' also at the booth.
Here some shots of the event itself, made by my brother in law, still nice and empty
Everyone getting instructions
Doors are open and first people get in.
ASUS booth still pretty quiet.
Our little corner
Fun to see from that close.
Honored this could also be at the booth.
And some shots of the built-in desk now that it's still quiet.
First thing they run off to .. Black Ops II stand ... yup .. 100% gamer event
Really enjoyed the OC sessions!
Cards were gone within half an hour :/
For who wants to see more boothbabes .. check here
Ok .. here it was too crowded for me
Highres picture of all the interest for the desk.
Playing with Nitrogen
Here a small video of the desk 5 minutes before closing time.
The result .... I hate fingerprints :P
Astonished how the got the stand 'hardware-less' within 10 minutes.
And back home.
ASUS Benelux, a huge thanks for this opportunity, it really was a great experience!
For now a small break, need to save up some money and and saw in some stuff in the desk
Cross back to her room
That went much faster somehow
A few orders with my last available money
So assembled it right away.
I like the new block a lot ... except the pci plate sticks out a bit.
So tried to bend it without a folding machine.
I'm satisfied with the result.
Draining the right loop ... by blowing on it
Swap the blocks.
Tight fit!
Got a (spam) mail with an offer to order posters in 100x75cm format for €4,90 each ... So thought I could try it for that amount of money.
I really think they succeeded! Nice to fill up the empty walls
For who's interested in these big format photos..
-> http://www.l3p.nl/files/Poster/ <-
And testing the loop again.
Small photo shoot
And playing around with the effects of RGB.
This has to be the weirdest color ... red completely disappears.
Getting both systems running again.
Idle usage .... oops.
That evening Shawn came with the cool idea to use the RGB leds, meant for the legs, in the lamps next to the desk.
First thing I did in the morning .. but the effect wasn't really visible cause of the sunlight.
But at night ... wow
Personally I like clear white ...
....and blue/purple most.
Here a video of the RGB effect .. and testing the speakers
Till the next update!
Played around with some acrylic remnants this weekend.
Not going to order large amounts of acrylic for these prototype legs/build (hint :P )
Once you're busy I got the tendency to keep improving it.
Really love this cutter.
Would love to do the small ring too.
I had 3 small pieces of black mat, transparent and glossy acrylic, think the glossy looks best.
Testing it on the 'UV bench'
Drilling the holes.
Maybe I will add a ledstrip in the future. (would need to saw in the legs)
Next leg .. next weekend
Didn't have much time to play with the hardware yet.
However, on request, here some temperatures of the CPU/GPU with a bench of the SSD's on the left system.
And some temperatures of the CPU/GPU with a bench of the SSD's on the right system.
i want to make this kind of build but i have no spare time, i can't even do cable management....
nice work mate!
I think this is what I need.
It has been over 2 months, time for a small update.
Needed some time to finish some things up and save up money for the screens and stand.
In the mean time also finished up a small passive cooled Htpc mod 'L3p AlCu'
And busy on a watercooled Acrylic build 'L3p - Parvum'
Also gathered a small collection of 'Desk Pc' builds I walked into the last few years.
Desk pc build collection.
(Send me a pm if you want yours added )
So here the photos from the last 2 months.
First bought a second hand floorstanding monitor mount.
Decided to buy this since I like to work with the desk and hardware inside and adding another 25Kg to the existing 80Kg ..
Dell 17" mounted for the looks .. bit small
Tested some other stuff in the meantime with the desk and some hardware.
And the first one out of 3.
Was in love with the design since day one.
Few weeks later also got the second one.
Still need to find a solution for the 'missing' Vesa mount.
(Sometimes you have to sacrifice for design)
Warranty voided .. but the leg is off :P
The original Vesa mount from the RS Stand won't work on the 1.5mm plastic.
So thinking of something else.
Will be be the fixation from the original foot.
Gladly have some 15x15mm aluminum bar left.
Also glad Asus and RS work with metric
So some drilling and tapping.
And assembled.
First one hanging like a rock!
2 outside monitors will need a small different way but should be no problem.
Waiting for the third monitor
Small update again.
First the gaming package for this build from SteelSeries.
And made the two other monitor supports.
The photos will explain it all
At this moment I'm fully investigating a problem I had with the memory since the start.
The mainboard doesn't recognise the memory from slots B1 and B2. (More info here)
Seems I got scammed with a second hand cpu
No idea what to do yet...
Hopefully soon the third monitor
There has been quite a change in GPU's here.
Had the abillity to trade the 7970 for a GTX690.
This card was perfect for the Parvum build.
So decided to trade the second 7970 for a GTX690 too.
Will also polish both blocks and bridge like in the Parvum build as soon as they are here.
So played around already with them this week.
Under full stress.
After buying 2 239H's myself I got a third ASUS 239H from Asus Benelux for helping them on the Firstlook event.
Thanks for everything Rogier and Sven!
Couldn't wait to get it working.
And have my first triple screen experience
Here a small video, monitor isn't aligned yet and please don't mind my gameplay
Really an awesome experience!
Soon the final pics.
Incredible
The Devil's Reject
Did the last photoshoot last weekend.
Will be sorting them this week and make a final post including 2 nice videos.
Here the last pics right before it was finished + something extra
Bought an LSI Megaraid from someone to replace the Highpoint.
Also decided to place the monitor power adapters inside the desk .. enough room for it
And the last cable management... pfff
Got my last order thanks to Highflow!
And on request a small 'howto polish EK CSQ blocks' video.
Inside Cross I will use Red coolant off course .. still couldn't resist to show the result with UV Green
Final pics!
First a shot of the inside. There's just one power cable coming out of the desk to feed the 2 pc's, speakerset and 3 lcd's. This next to the 'standard' cables and watercooling
And the rest
(click for full res)
Lights off!
Taking my word back on surround-gaming .. pretty awesome
So is dual benching.
This wasn't just a casemod/build .. on the background the last 8 months I was able to to fully test the prototype on temperatures and compatibility etc. with the used products.
I want to thank? all the sponsors for helping on this project!
Some words from Thomas Nunn - CEO Red Harbinger:
"Well, it has been a challenge, and we appreciate the extreme levels of patience as seen within our fan-base.
We had no idea of all the complex logistical issues that would arise when manufacturing and distributing the large Cross desk around the world.
After several design iterations and manufacturing tweaks, we finally got the process down and have a viable means to store and ship out the desks to both North America and the EU.
Cross is meant to be our high-end flagship product, but while we were ironing out the key details, we designed several other products as well; we won't tease those photos until they are in production!
Our North American retailer is awaiting their Cross desk sample to arrive so that we may conduct final quality inspections on the finished product.
Once we review, you can expect the button to be pushed for final production and delivery to our North American and EU distributors.
As a status update, the desk is finished, with packaging development in the process as we speak.
Make sure to visit our facebook page or later our website to keep updated on future products and contests."
Thomas, Scott, Shawn, Chuck, Youri, Daniel, David .. you guys are awesome!
Next to the sponsors I also want to thank all other people that helped Red Harbinger or me personally on this project!
And off course ... you guys
(click for full res.)
At the end of this week I'll upload 2 different videos. An unpacking/buildlog video and a final video!
Is there a specific photo you guys like?
Last edited by l3p; 04-28-2013 at 02:17 PM.
Any chance you are selling this awesome desk to the public?
Intel I7 920 (4.2ghz)
EVGA x58 Classified 760
Asus 580 DC2
Corsair Dominator GT 6gb
256gb SSD
This desk will ALWAYS be relevant. ITs an amazing piece of craftmanship. Every time i find it on the web i drool...its my favourite for sure.
Gigabyte EX58-UD5 // Intel Core i7 920
SuperTalent PC3-12800 3x2gb
ATI 4870X2 2gb
Samsung 1TBx6
Coolermaster Silent Pro Gold 1000w
Coolermaster Cosmos
Dell u3014
how in the world did i miss this thread?
mobo: strix b350f
gpu: rx580 1366/2000
cpu: ryzen 1700 @ 3.8ghz
ram: 32 gb gskill 2400 @ 3000
psu: coarsair 1kw
hdd's: samsung 500gb ssd 1tb & 3tb hdd
Bookmarks