Calling XS Llano Owners, need your help, 3DMark06 result for HWBOT Team Cup

[BeepBeep2]

I would appreciate it greatly if one of you guys could run 3DMark06 on your Llano setup.
Doesn't need to be on LN2, or a super score, but decent enough.

Score must use this backround:
http://hwbot.org/blog/wp-content//hwbot-team-cup.jpg

and be submitted here:
http://hwbot.org/competition/team_cu...635_amd_llano/

Thanks a bunch!

I would do it myself, but the Llano system I adopted, the Gigabyte UD4H was defective and gave out within 30 minutes of use. The RMA won't get here fast enough for me to bench it.

[Yeroon]

you still need an entry? I got a 9115, air a8-3850.
I can see if i can do better as well, just ran my tf2 stable setup.
http://3dmark.com/3dm06/16798774
Yeroon

New score http://3dmark.com/3dm06/16798795 9297

[BeepBeep2]

Not sure if I need one or not, you would probably have to submit yourself which means making an account and linking yourself to XtremeSystems.
It doesn't take long.

[Yeroon]

I guess if I submit it and you get a better score you can remove mine?

I'm gunna go add it now. I got a 9356 at 3.7, I've run out of base clock to overclock the gpu/mem, so thats the best I'm ever gunna get with this combo.

Yeroon

PS. Your inbox ish full.

[BeepBeep2]

Okay thanks for telling me
If we get a better score, it is a team competition so the better score automatically overrides.

By the way, welcome to XS and welcome to the HWBOT Team as well!

[Yeroon]

Score is up, pictures are up. I made the screenshot with my then best, and didn't think to renew it with the 9356 score. I made a new pic and a link to score, I hope that its ok that way. Just upped the multi to 27 and ran it through again.

Thanks for the welcome.

Bedtime.
Yeroon

[BeepBeep2]

I should have sent you this before...sorry
http://hwbot.org/news/884_application_12_rules/

Looks like you will have to bench it again or post the futuremark URL

EDIT:
OH, by the way, you can add the URL to the submission page, on the right side hit "EDIT" and scroll down around there you can add the screenshot. there is a place to put the URL. Also currently the CPU speed is read as 3.71 MHz, not GHz...have to type out 371x in the box.

Thanks a bunch!

[Yeroon]

fixed clock speed, added url. I saved the urls just in case.
The "link" was also at the bottom of the submission pic, but it was done in paint so not clickable.

[Don_Dan]

Thanks for your submission and welcome to the team!

Unfortunately your screenshot is not 100% correct for HWBot, you need CPU-Z CPU and memory and GPU-Z to comply with the rules. If it's not too much to ask for could you please rerun and make a correct screenshot?

[Yeroon]

Ok. Problem is its a 3850 and gpu-z will report whatever its set in the bios, but it doesnt change anything. So gpu-z for me is pretty useless. Its going to be a little bit, i have to make bios changes to get there again.

Yeroon

[Yeroon]

Did new test, got a new score of 9462, but the cpu-z baseclock is off from actual, so all the numbers are low. Made a new shot anyways with new gpu-z/cpu-z x2 and cleaned up the shot a bit. It up with a new link to to higher score, but will the cpu-z being incorrect cause any problems? gpu-z was right with a 822 gpu clock, and being locked it can't be anything other then base x 6. (822/6=137)

Yeroon

[BeepBeep2]

It doesn't even matter what GPU-Z reports...

I don't think so about CPU-Z, it has been super buggy lately.

Thanks for your submission and welcome to the team!

Unfortunately your screenshot is not 100% correct for HWBot, you need CPU-Z CPU and memory and GPU-Z to comply with the rules. If it's not too much to ask for could you please rerun and make a correct screenshot?

If he has an ORB link it doesn't matter if the screenshot is a picture of a smiley face made in MS Paint according to the rules...

[Don_Dan]

CPU-Z doesn't matter, but you can just use a version that reports your clocks correctly. It won't work for validations but it's fine for 3D submissions.
I know I'm nitpicking but you have show the 3DMark 06 window in your screenshot to show the settings. I know it can be checked in the validation link but those are the rules.

And you don't have to edit your old score, you can just submit a new one!

[BeepBeep2]

have a valid screenshot (see example below): clearly show 3Dmark score, 3Dmark subtest scores, 3Dmark settings, processor in CPU-Z, videocard in GPU-Z, unless if you provide a futuremark orb link

Even though the screenshot is required if it is incorrect and an ORB link is provided there is no issue.

[Don_Dan]

Alright, it's been a while since I benched 3D.