New Corsair Dominator Platinums

[kagula323]

Awesome runs CoolBits

3D C10

Great Dumo. What VDDR/VTT/VCCSA you used for 2800 9-12-12-31 1T?

Sick IMC there...sorry guys for being late with testing of 2400 C9 kit I have a lot of work and also things to school...and also need Ivy with better IMC

When u have time Blue Storm. I'm just curious how they compare to the 2666C10 kit.

[Dumo]

Thanks Kagula.

1.9/1.175/1.25

[andressergio]

Awesome runs CoolBits

3D C10

great C9 run my friend !!!

[Blue Storm]

What is max safe voltage on air for Sammys? I just want to know what can I set for that kits

[AVulgarPicture]

i run no less than 1.85, lots of people run 1.9, some have done over 2.

[Blue Storm]

So I was more moderate with only max 1.8VHere I am with some results with 2400 C9 kit and full banks (16 GB):

SPI32M and bandwidth 2548 9-11-11-31 1T 1.75V


I don't know why but screens with freq 2666 are corruptedOnly good one is 2600 10-12-12-31 1T 1.75V but it was SPI32M stable also with 2666 10-12-12-31 1T and 1.75V...so 2400 C9 kit is I would say quite worse than 2666 C10


//EDIT: need Ivy with better IMC because it's hard to make stable 2666 MHz...I can try also this OC again on Maximus V Extreme on tuesday
//EDIT2: also found weird thing...SPD in CPU-Z says that XMP profile is 9-12-12 but on memories there is written 9-11-11

[Blue Storm]

Finally I have Ivy with better IMC so here are some new results:

1249 MHz 9-11-11-31 1T 1.65V

1250 MHz 9-11-11-31 2T 1.65V

1300 MHz 9-12-12-31 1T 1.75V

1381 MHz 10-12-12-31 1T 1.65V

1418 MHz 11-13-13-36 1T 1.65V


So no problem with 2400 C9 kit and 2800 MHz

[FlanK3r]

Nice! Wow. Only 1.65V? What about max stability?

[Shiranui Gen-An]

Wow those Platinum 2400C9 are stronger than my Vengeance 2400C9. My chip can do 2800 but those will need more than 1.65v for 11-13-13.

[Blue Storm]

Wow those Platinum 2400C9 are stronger than my Vengeance 2400C9. My chip can do 2800 but those will need more than 1.65v for 11-13-13.

It surprised me too...not too much worse than 2666C10 with CL9 and CL10...but for 2800 no way with 10-12-12 only 11-13-13 works for stable running

Nice! Wow. Only 1.65V? What about max stability?

It's so so stable but Prime 95 no problem...and I was running almost all day with 2800C11

[tistou77]

Hello

The Corsair Platinum 4x4Go 2400 C9 are OK with X79?
It is stable h24 (with a 3930K for example) with Prime95, OCCT or LinX?

Thanks

[Shiranui Gen-An]

It will depend on your CPU's IMC. I'm not having any issues running my 2400C9 Trident X on X79.

[tistou77]

Ok thanks you have a 3930K or 3960X?

your TridentX (16GB?) 2400 C9 are stable h24
What voltage for VTT, VCCSA and Vdimm?

Thanks

[Shiranui Gen-An]

I wanted some Platinums but didn't want to pay the big $$$ for the higher end kits so I grabbed two of the 2x4GB 2133C9 kits from Micro Center. I had been testing some Team 2400C9@2666C10 1.65v on my MVE so I just swapped them out without changing any of the BIOS settings. Surprisingly, the Platinums booted just fine. Intrigued, I decided to press my luck and run Super Pi 32M.




WHAT.
THE.
FORNICATION.

How the heck did some lowly 2133C9 bin of Samsung pass those settings at a voltage lower than my 2400C9 rated Vengeance?!?!?

[TaPaKaH]

You were simply lucky. Usually, 2133C9 Platinums are Hynix CFR.

[tistou77]

2133C9 1.5v Platinums are Samsung

[Shiranui Gen-An]

2133C9 1.5v Platinums are Samsung

Indeed. It's the 2133C9 1.65v kits that are Hynix: http://www.newegg.ca/Product/Product...82E16820233338 (Note that the revision is 5.12)

I knew mine were Samsung when I got them, Version 4.13 plain as day printed on the stickers.

[tistou77]

Ok, the CMD16GX3M4A2133C9 PK1 (1.5v) that are Samsung

[xdan]

HCH9 or HYK0 ?
They can do 2666 C9?
And 2800 C10 Super Pi 32M stable?

[tistou77]

I don't know, I have 2400 C9-11-11 (Samsung)

[Shiranui Gen-An]

These are HCH9. I haven't tried pushing them tighter, I seriously doubt they'll do 2666 C9 or 2800 C10.

[Reefa_Madness]

Interesting to note that your module has a mix of week 210 & week 213 ICs.

[TaPaKaH]

2133C9 1.5v Platinums are Samsung

I stand corrected, thank you
(it's just that Corsair's resellers frequently mix the voltage rating and/or "A"s and "B"s in the part numbers so you never know what you're going to get )

I seriously doubt they'll do 2666 C9 or 2800 C10.

Why not? If they do 1333MHz CL10 at 1.65V this means that the IC quality is far from worst so 1333 CL9 and 1400 CL10 is only a question of voltage.

[Shiranui Gen-An]

I guess I'm babying these sticks. Though you're probably right TaPaKaH, they probably will go far if I put more volts into them (1.70v+). This is just a standard 2400 C9 run.

[l0ud_sil3nc3]

^1.7 is peanuts for Samsung, 1.85v-1.9v is where you want to be