2666 C9 was no go for 32M, even up to 1.9v.
2666 C9 was no go for 32M, even up to 1.9v.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
Have you tried slightly higher VCSSA?
Originally Posted by 3oh6Originally Posted by Brian y.
Didn't try VCCSA, I thought VCCIO was the key voltage on Ivy Bridge.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
Shiranui Gen-An, try 2800 10-12-12-31, with 1.8-19V. See if they are spi32 stable...
The infamous RAM GUY on XS !! What an honour to meet you here, he will take care of your RMA Shi, go for it !
I can testify for you, you were pushed by Jake and RAMGUY !! THEY MADE YOU DO IT !!
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
I noticed something interesting regarding my 2133C9 kit when attempting to pass 4x Hyper Pi 32M at 2666C10. Raising the VDIMM over 1.72v actually made things less stable. I dialed it back to just under 1.70v and it passed.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
They didn't feel hot at all, but I have a Dominator GT cooler I could use.
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
A fan or airflow is always recommended at speeds over 2400MHz. Samsungs can get quite warm. Hynix also do as well.
Originally Posted by 3oh6Originally Posted by Brian y.
Dommies 2133 9-11-10-27 quick test 2600 tight secs, med. terts
Uploaded with ImageShack.us
Last edited by Dumo; 02-21-2013 at 07:56 PM.
2400 @ 9-11-11-28 1.6V
Uploaded with ImageShack.us
2666 @ 10-12-12-25 1.635V
Uploaded with ImageShack.us
Tighten up a bit
Uploaded with ImageShack.us
Last edited by Dumo; 02-21-2013 at 02:04 AM.
2666 4X4
Uploaded with ImageShack.us
2400C9 @ 2400/i7 980x @ default/4800
http://www.overclock.net/t/1351472/b...#post_19604955
MSI MPOWER board with 4 X 4 2800c11-14-14-35 running at C11-13-13-30 1.66VDIMM
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
i7 4930K
32GB Corsair Vengeance Pro DDR3-2400C10
Asus Rampage IV Black Edition
2x GeForce GTX 780
Corsair AX1200
Cooler Master HAF-X
Dell U3011
I have a huge review in progress on a dualie 2011 system but since last Friday I've been working with these Dominator Platniums C9-2133's and I can not beleive the
performance difference that I am seeing.
These sticks:
http://www.corsair.com/en/dominator-...m4a2133c9.html
I have dropped times in benchmarks that I would have said wasn't possible including running these at CAS8@1983 which is the maximum speed you can set on this dualie.
Guys, Dualies just don't do this!
Just think on this one as a teaser:
There is this guy in Japan that is huge into doing pi benches.
He has a Supermicro dual 2011 system with 2-E52690's that max at 3300MHz
My system with this new SM board will max at 3612MHz so yes, I have a small advantage in speed
On this pi app to do pi to FIVE BILLION digits he took 589 seconds
I did it in just over 530 seconds!
That is 59 seconds faster on a just under 10 minute benchmark and over 1/2 that amount was because of the Corsairs!
These things just plain rock!
His speed says 2900 but that is wrong. it doesn't show turbo speed of 3300 on his submission.
http://www.numberworld.org/y-crunche...charts/5b.html
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Picked up some 2133 1.5v sticks..
Just started tweaking.. could not get 2400 mhz cl9 stable yet.. went to 1.65v.. I decided to take it easy , and loosened timing to cl10... and now running 2400mhz at 1.5v.. I am shocked... ran prime95 10 min.. and hyper pi 32.. both seemed ok no errors.. Wow these are great... I was running my Patriots at 1.8v plus all year.. 2400 7,11,7 8 gig.. its great I dont need so much voltage I can remove the Dominator fans.. .. would be a shame to cover the rams anyway....
Case: M.M Ascension C.S
MB: Asus RIVE
CPU: 3960 24/7: 4900 @1.43v
Ram: 16 gig Dominator Platinum 2133 series ,@2450hmz 10.11.11.28 1.5v
Drive: OCZ RevoDrive 3 X2 240GB
Cooling: 2 x 560 SR1 + 1 X 280 SR1 single loop
Aquaero 5 w/NB PK3 Fans @ 900rpm. Koolance 380i w/. MCP355 x 2 XSPC top
Video: Titan Hydro Copper x 3 SLI
PS: 2 x Corsair 1200w
I picked up a 2X4GB 1866C9 kit at Microcenter yesterday and its version 3.24. I easily got it to 2400 10-12-12-31 (1.65v). I haven't tried to push it further yet but do any of you guys know what chips are in this version??? I can't seem to find it anywhere.
Ver 3.2X shows as being Micron ic...
http://forum.corsair.com/forums/showthread.php?t=68811
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
fun times ahead !!
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
1500 and that's it? I thought "Ivy" can do more
Bookmarks