Enjoy!
IMG_4035.JPG
Specs:
Zotac g43 mini-itx mobo
intel Q9505 quad core CPU
4gb DDR2
GTX460 1gb
OCZ 120gb SSD
Silver Stone 450watt small form factor PSU
IMG_4021.JPG
IMG_4038.JPG
IMG_4037.JPG
IMG_4036.JPG
IMG_4034.JPG
IMG_4031.JPG
IMG_4027.JPG
IMG_4024.JPG
IMG_4023.JPG
IMG_4022.JPG
IMG_4039.JPG
Last edited by CrazyNutz; 05-29-2012 at 09:29 AM.
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
awesome!!!
and considering the 450w psu, i know you can swap out for newer hardware like an IB and 28nm gpu if you ever wanted.
2500k @ 4900mhz - Asus Maxiums IV Gene Z - Swiftech Apogee LP
GTX 680 @ +170 (1267mhz) / +300 (3305mhz) - EK 680 FC EN/Acteal
Swiftech MCR320 Drive @ 1300rpms - 3x GT 1850s @ 1150rpms
XS Build Log for: My Latest Custom Case
Thanks
I have a spare 2500k. I just need to score a mobo I'm thinking this little guy: http://www.newegg.com/Product/Produc...82E16813157312
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Nice one!
Have the same briefcase, been sitting in my closet since 2006, with the intention of doing something similar. Tell me, what LCD did you use - luv it that you just bolted it with the original Vesa mount
Good going, keep us posted - nice and simple, and very effective- one of the better briefcase mods I've seen!
Never argue with Idiots...they will drag you down to their level and beat you with experience!
i-Prodigy (small APD2 GFX/CPU waterloop) ; HP Blackbird Project Log (dual-Xeon Watercooled) ; Macho Mini Project Log (Sandybridge watercooled mini-ITX)
Thanks.
The monitor is a Viewsonic 19" Model VA1912WB with the bezel removed. It was not working and headed for the trash before i intercepted it. I opened it up, and replaced three bad caps on the power board. Good as new.
I was very please with how well it fit in the case too. It is mounted with the vesa mount, also the monitor has four (two on each side) pre-drilled/tapped screw holes that I used to secure it. You can see these on the sides of the lid.
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Posting Permissions
Reply With Quote
Bookmarks