Gskill Trident X 2 x 8GB F3-2400C10D-16GTX - quicky run

[mike]

Did a quick run of set of 2 x 8GB Trident X - running at 1.84V air - 2550mhz was pretty much the max what I was able to do with this kit. I tried hard to get them to go to 2600mhz but wasn't able to - regardless of voltage and timings. I was hoping to manage 2600-2800mhz with cas 11 - but no chance!


2400mhz @ 10-12-12-31-2T was fine @ 1.65V - however in order to get 2400mhz @ 10-12-12-31-1T I had to push the memory voltage to 1.78V


Overall nothing too exciting - but I guess good for a 2x8gb kit ???

[bro20000]

Have you tryed tigher timing. Got mine down to 9-10-12-19 1T 1.72v

[stasio]

Try with F11a BIOS.
Push more Vtt

[mike]

Try with F11a BIOS.
Push more Vtt

thanks for the F11A! didn't realize it was out!

How much VTT are you thinking? Tried 1.0V-1.35V - but didn't appear to have much impact!

Tried F11a with the Tridents - but no mayor improvement.

Have you tryed tigher timing. Got mine down to 9-10-12-19 1T 1.72v

are you using the 2 x 4GB kit or also the 2 x 8GB kit? - those would be awesome timings if I could get there! I tried tightening and loosening...no luck pushing them to 2600mhz for me!

[bro20000]

Am using 2x4GB kits had no luck to at 2600Mhz running Cas9 timing 2400Mhz prime stable

[mike]

Am using 2x4GB kits had no luck to at 2600Mhz running Cas9 timing 2400Mhz prime stable

the 2x8GB kit actually has much different and looser timings - trfc timings via XMP for example is a super loose 313 - at 2400mhz anything trfc lower than 210 will result in no boot

[theix]

2400C10 8GB Kit Single side and 2400C10 16GB Kit Double side are pretty much the same.