SuperPi32m 5Ghz Ivy All Out Challenge!

[ToyTen]

Hey ToyTen nice to see you my friend. You need to work on that score buddy, i can easily beat that with 100MHz on the CPU to spare, lol!

hey Zeus, its been a long time yes nice to see you too mate
Such a long time that i almost forgot how to score on 32M :P

I wish you to get one of those 5ghz cpu's !

[Dumo]

^^^ Dumo were you running LN2 on cpu and ram? Awesome run!

SS on cpu and cold air on mem.

You still have the blue Gskill right Ron? If I'm not mistaken you got the early batch with green pcb too

sicks secondaries dumo great score

Thanks Splave. Board is awesome

This kit like 4-4-4-4 and 13-13 with vttddr @ 0.8125

great score Dumo !!!

Thanks Sergio

[Zeus]

@ToyTen, CPU is already taken care of by one nice member here, thanks Splave!

Been messing around all day trying to get everything stable but failed time after time.

Then i decided to give my 16GB of Samsung Green low profile stuff a go:



Not really impressive but it didn't take excessive volts, just 1.61V on the RAM but it probably could have done with less.

Now that i have an idea what caused the instabilty i will give it another go tomorrow with the PSC rams.

[Splave]

hehehe nice volts for 5ghz mate

[Zeus]

Sure is, it's a bit hard to read but it says 1.376V. Iirc it was 1.37V in bios. Happy with that.

[l0ud_sil3nc3]

excellent run Dumo, are those green pcb or black?

is that by chance the kit you got form Aussie?

[Dumo]

excellent run Dumo, are those green pcb or black?

is that by chance the kit you got form Aussie?

Thanks l0ud. These are my kit of mix green and black pcbs from 2 different batches

[OC Nub]

Nice run Dumo! Blue G.Skills are the 32m king it seems

[runmc]

SS on cpu and cold air on mem.

You still have the blue Gskill right Ron? If I'm not mistaken you got the early batch with green pcb

Yes Roy I still have two sets of them. I still have the good set from Frank @ gSkills that you remember. Second set I bought from some one that aren't as good.

[ZenEffect]

i wish i had my blue gskills back

[Splave]

^ nothing quite like em lol best bbse is blue sticks, 2nd best is ty blue sticks 3rd everything else.

[ZenEffect]

^ nothing quite like em lol best bbse is blue sticks, 2nd best is ty blue sticks 3rd everything else.

i think the "right" psc can give them a run for their money on air. once you go cold its over though... bbse = win so just rub it in a little.

btw killer run Dumo

*edit*

new chip seems to have much better imc. 2600 c8 boots now no problems

[youngpro]

you guys sure, i reckon psc might challenge bbse 7-10-7 7-11-7

[Dumo]

Thanks Zen


Dang, gotta scoop up this rig to the office in the morning to keep the fun going

Dumo - 6:18:797 - 50x100 - 1300MHz - 8-11-7-22-72-1T - MVE - Gskill 2133 C8 - 1.91v - air

[angoholic]

insane run...very nice!!

[Raja@ASUS]

You need to Ln2 those sticks Dumo, they might be a set that scales with more cold.

[Dumo]

insane run...very nice!!

Thanks Angoholic. I'll be happy to just follow you when go cold

You need to Ln2 those sticks Dumo, they might be a set that scales with more cold.

I'm waiting for this guy Raja



Board and kits already greased up

[Hondacity]

we're gonna see surprises huh dumo? i hope your blackness arrives in time.

update in the next few hours

[bassplayer]

So I did a quick run yesterday after I got everything set up.

Does 6:29 sound okay for 2200 9-11-9 with no tweaked subtimings and no wazza? Sounds pretty in-line to me... I just need to figure out how to get this damned chip to boot with higher memory. It's previous owner said it did 2800 no issue, but I can't get any higher than 2400 to boot.

Using Kingston 2000 9-9-9 BBSE sticks that do 2133 8-9-8 at 1.65V.

[Splave]

try 8-11-9-28 1.85v 2400mhz

[Zeus]

Today i tried 2x2GB Trident 2000 c9 which should contain BBSE as far as i know but it was a disaster, couldn't get it to boot over 2200 and it hated volts. Maybe Gskill changed chips on the latest kits as this one got back from RMA a couple of months ago.

[bassplayer]

try 8-11-9-28 1.85v 2400mhz

I'll give it a try when I get home today. I found out one of the three sticks is worse than the other two. It wouldn't do 2400 9-11-9 at 1.725V but the other two will. I want some 2600 action though!

[OC Nub]

Nice job Dumo!

Today i tried 2x2GB Trident 2000 c9 which should contain BBSE as far as i know but it was a disaster, couldn't get it to boot over 2200 and it hated volts. Maybe Gskill changed chips on the latest kits as this one got back from RMA a couple of months ago.

I bought a couple kits of 2000 Tridents from ebay. One does 2400 8-10-7 1.85v 32m stable but not a penny more. The other kit boots 2400 but wont pass. Also bought a kit of 2000 ripjaws from Sears for 46.00, they do 2450 8-10-7 but no more. Its very hard to find a good kit anywhere now. Someone is selling the 2133 perfect storm 6gb kit on ebay now but they are asking waaaaaaaay too much.

Hope to have the blue gskills here by monday to get a score in before this challenge closes. I vote for a 30day extension. I never liked 2d until this thread started, its been a lot of fun, plus Ive learned a whole lot about memory subtimings and clocking thanks to some of the guys here like Raja@Asus.

[bassplayer]

Interesting issues...

First off, I can't boot Cas 8 with anything over ~2300, no matter what mem volts.

When trying 1M, I can pass at 2550 9-11-9 with 1.775V. If I give it 1.8V, it will fail. These sticks seem like anything over ~1.8V and they flake out. I delidded one and they're definitely BBSE. Does this make sense at all?

[Raja@ASUS]

Check subtimings for CAS 8. tRWSR & DR need to be 4+ to be stable, in fact I'd set 6 across the entire range just to debug. If that does not do it, those sticks are not that great.