small improvement with memory on LN2.Originally Posted by hiwa
BBSE did not seem to scale with voltage like I thought it would, oh well
small improvement with memory on LN2.
BBSE did not seem to scale with voltage like I thought it would, oh well
U still have cw problem dude, look your available memory. Try 7_10 under ln2 ans 7 tcwl
ha I must have forgotten to set maxmem on that run, I was testing 600+
7_10 at TCWL 7 was not working constantly failing by sometimes by loop 4 sometimes loop 23 at full pot.
there's a Triple Point pot hidden somewhere under there
I tried voltage from 1.87 to 2.0v but stopped there as I was not seeing scaling, I will give PSC a try this Tuesday when I refill.
Last edited by l0ud_sil3nc3; 11-12-2012 at 09:22 AM.
What's the humidity in your area?!
PS: Looks like your MAXMEM was set to 600MB for that run, but your available real memory is too low.
![](http://www.hwbot.org/signature/u15466.png height="110" )
Humidity is pretty low, 35% in my house, but I have been benching for hours and hours on end, hence why so much frost.What's the humidity in your area?!
PS: Looks like your MAXMEM was set to 600MB for that run, but your available real memory is too low.
I see. It looks pretty "cool" though...
Were you using ERAM for this run? And which CW size were you using? Instead of using ERAM you could try using two HDDs.
Eram was used for this run, OCX SpiTweaker (656mb, 32, no CDT just c > x while ramdrive is on Z and spi resides here and is launched an ran from there.I see. It looks pretty "cool" though...
Were you using ERAM for this run? And which CW size were you using? Instead of using ERAM you could try using two HDDs.
nice improvement man, time to put pitweaker to rest. I get better results just single copy paste of 1.8GB file, give it a shot man. Keep pushing
Ssd make a diffrence regarding wazza versus classic hdd
Thanks Splave
Manual waza is definitely on the top of the list as my waza is not very efficient.
I have everything ready minus the LN2 hopefully they are not closed today and I will be shooting for 17's if I can fill back up tonight. Not sure if I should give PSC a spin cold or keep trying with BBSE.
Regardless this thread is awesome sauce and I will keep pushing
hmm not given this one a try, just on a 600GB Raptor over here.Ssd make a diffrence regarding wazza versus classic hdd
Faster waza? Is that all? Or overall actual faster time?
No,you can get a faster wazza with classic hdd,ssd is not the best for wazza.
Finaly today i run mems on ln2. cpu is on air.
you have to spent quite along time for test in order to get a decent run.
i have to improve it next time.
Uploaded with ImageShack.us
Splave - 6:17:515 - 49x102.1 - 1326MHz - 7-10-7-25-1 - ASROCK OC Formula - G.Skill PI 2300 2x2GB PSC - 1.96V - LN2/SS
Limit of cpu 1354 fails immediately even 8-12-8 XD my luck with 3770k is so garbage...will try a new one tomorrow. Board is efficient as hell.
ASROCK OC Formula sets 49x102.1 as 5001.54
maximus v formula sets 49x102.1 as 5004.29
Uploaded with ImageShack.us
Amazing work with the 2800 CL11's & Cold Kintaro
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
Kintaro i tried my good 2800 kit but best i did was 2666 c9 ss-20 with everything else tight, u got CRAZY hynix there they can do cl8 with those timings man.
I know dumo has some nice hynix to, hope he find time to try them under cold.
Got 296xx with PSC but i want fight with hynix and sammy lately.
Last edited by hiwa; 11-16-2012 at 10:16 PM.
Is that Hynix for real?
Where courage, motivation and ignorance meet, a persistent idiot awakens.
they have to be real cold in order to scale otherwise no magic.
it is hard due to increased risk of damage at deep freeze.
worth to try.
Interesting how cold are we talking about?
Also are these CFR/BFR/MFR?
Hynix no have CB (AMD) but on IB a lot of times u get 55 code on boot when temp is lower than -100
should be some CFR
at -80000 no hynix can do like kintaro did with his kit, his kit should be very very special, i rememeber we tried at computex some nice hynix but CL8 with tight timing were IMPOSSIBLE
His kit is BFR not CFR.Too bad we can't find those good BFR anymore
TridentX 2800 BFR? u sure?His kit is BFR not CFR.Too bad we can't find those good BFR anymore
Kintaro care about sharing latest 5 digits on one of the ICs?
How important is the word waranty to you?
I pay for my hardware.
anyhow if you don't go down to -186 don't blame yours kit.
very important, don't open them if they are not sample.
Possibly the first batch
Neweeg's first retail batch (only 2X4GB)
Last edited by Dumo; 11-17-2012 at 10:49 PM.
Posting Permissions
Reply With Quote
Bookmarks