Gskill TridentX F3-2800C11Q-16GTXD

[kintaro]

Still absolutely awesome for Hynix chips. Never knew Hynix could pull this off. Great stuff Kintaro! I bet you don't dare to tell Vdimm for that.

vdimm on DMM was quite low.
1.95v. an atempt of increase indicate no more scaling.
anyhow for the moment i'll squize 2nd/3rd timings.

[kintaro]

7-11-9-20-1T @ 2722Mhz is realy nice out of (2x4GB).

[Don_Dan]

Are you kidding me? CL7 at 1360MHz?!
What was Vdimm and temperature?

[andressergio]

Are you kidding me? CL7 at 1360MHz?!
What was Vdimm and temperature?

Don i have that RAM its amazing but i think they have to be very high vcore to do that, mines do 3000 at 1,75 and i boot 2933CL11 at 1,725 but for that latency and speed must be high volts

anyway congrats kintaro !

[kintaro]

Are you kidding me? CL7 at 1360MHz?!
What was Vdimm and temperature?

the only way to archive cl7 is more cold.for me below -100C.
Vdimm is slightly over 2V .

Don i have that RAM its amazing but i think they have to be very high vcore to do that, mines do 3000 at 1,75 and i boot 2933CL11 at 1,725 but for that latency and speed must be high volts

anyway congrats kintaro !

Thanks andressergio but for the moment i can't use cl7 due to lower copy rate comparing cl8.
i think imc cant handle. i have to freeze them once more in order to retest.

[andressergio]

Kintaro post pics of the mem on cold i luv pics

[Alex-Ro]

the only way to archive cl7 is more cold.for me below -100C.
Vdimm is slightly over 2V .



Thanks andressergio but for the moment i can't use cl7 due to lower copy rate comparing cl8.
i think imc cant handle. i have to freeze them once more in order to retest.

you need to lower TCWL(cas write latency) in order to benefit the lower CAS value

[Don_Dan]

the only way to archive cl7 is more cold.for me below -100C.
Vdimm is slightly over 2V .

Thanks for the info, that's what I expected. 2V and plenty of LN2.
Nice work!

[kintaro]

you need to lower TCWL(cas write latency) in order to benefit the lower CAS value

Thanks Alex-Ro.
Finaly they are efficient beyond of funcy Hz....




Uploaded with ImageShack.us

[hiwa]

Wow these is really nice with Hynix man, congrats

[kintaro]

Uploaded with ImageShack.us



Uploaded with ImageShack.us

[Random Murderer]

Uploaded with ImageShack.us

Is that an old ATI 1950PRO?
I loved mine.

Very nice bench setup and impressive numbers. Hope to see more!

[andressergio]

haha thats what i like amazing pics

i dont know notha about cold but u have to open the RAM and isulate it right ?

thanksss

[Alex-Ro]

Good job,now run some 32M@5 ghz ,your bandwith numbers are huge,your score should be awesome

[owikh84]

2837 11-13-13-25-1T 1.7v


2856 11-13-13-25-1T 1.71v


2933 11-14-13-25-1T validated, 32m failed

[andressergio]

2837 11-13-13-25-1T 1.7v
2856 11-13-13-25-1T 1.71v
2933 11-14-13-25-1T validated, 32m failed

great owi this RAM kick ass i have them and luv them

[owikh84]

great owi this RAM kick ass i have them and luv them

thanks sergio. yeah it is an awesome kit.

2866 11-13-13-25

[kintaro]

Good job,now run some 32M@5 ghz ,your bandwith numbers are huge,your score should be awesome

32M@5 ghz



Uploaded with ImageShack.us

[XBrytanX]

Daaarrnnn......nice run kintaro

[Crazzy85]

I have an 2x4GB Kit from these vali on air cpu and ram

http://valid.canardpc.com/show_oc.php?id=2612153

[ihog6hog]

My [ TridentX] F3-2800C11D-8GTXDG

Hynix CFR H9C

[zpaf]

I have no post errors with my gene but a lot of windows bsods at 2800MHz.

Here is with trident x profile 1.85 from bios.

[andressergio]

I have no post errors with my gene but a lot of windows bsods at 2800MHz.

Here is with trident x profile 1.85 from bios.

great !!! can you post some SPI32M ? i have the same RAM and they are AWESOME

BSOD at 2800 ? on gene ? thats weird mate u sure u tuned VCCSA ? and Latency Boundary ?

[zpaf]

great !!! can you post some SPI32M ? i have the same RAM and they are AWESOME

BSOD at 2800 ? on gene ? thats weird mate u sure u tuned VCCSA ? and Latency Boundary ?

Yes bsods on gene but i have not tune any vccsa/vccio.
Gene gives 1.25 to vccsa and 1.15 to vccio.
Latency Boundary on auto.

[zpaf]

And another one at 5GHz with trident X 1.85 profile.



Here is the box.