Ivy Bridge i5 3570K/i7 3770K batch and o/c results

[andressergio]

PSC tight




Samsung

this is even better mate grats !!!

[andressergio]

Thanks Dumo another run


Cinebench running



Cinebench finished



LinX running



LinX finished

very nice hersounds seems u having fun with your chip did you changed the tim ?

[andressergio]

^^Awesome cooler, I used the same

indeed the 920 is even better

[hersounds]

very nice hersounds seems u having fun with your chip did you changed the tim ?

yes buddy i change for cool laboratory Liquid Pro , now chip run much cold

[Dumo]

[hersounds]

Not bad!

3226B987

[angkies]

CRAZY CHIP u got there... Sell it to me, plz :p

[Fezzik]

I had the exact same batch as DUMO the 3226B939 but I can not hit 5ghz without upping the volts to 1.52. The memory has been a problem to that It wont stick to the 2400 (1200) IMC without the high voltage.



I have high voltage but my temps are staying in low 70s when under load. Is this ok. or should I keep on looking for that golden chip.

[Dumo]

Welcome to XS Fezzik

Pic is hard to see. Can you post slightly bigger pic?

[andressergio]

amazing low volts mate !!!

[andressergio]

I had the exact same batch as DUMO the 3226B939 but I can not hit 5ghz without upping the volts to 1.52. The memory has been a problem to that It wont stick to the 2400 (1200) IMC without the high voltage.



I have high voltage but my temps are staying in low 70s when under load. Is this ok. or should I keep on looking for that golden chip.

great Fez !!!

you already know the story some chips eat more volts than other specially the exponenital voltage curve from 4,8 to 5 on IVY

mine needs 1,35 for 4,8HT and 1,488 5HT

[SonDa5]

Batch 3204B958




Added some Fujipoly Extreme thermal pad around die (.5mm) for support and to help cool. It's the best performance I have had so far.



No IHS. Direct contact between die and DT Sniper water block.

Mounted



using a EK TRUE 115X back plate for stability.



Ambient Temps 18.6C
IBT quick and dirty standard run

5GHZ@1.37v

http://valid.canardpc.com/show_oc.php?id=2578924






Idle Temps

21C 24C 21C 18C


Maximum Temps

62C 70C 67C 62C

[Fezzik]

Welcome to XS Fezzik

Pic is hard to see. Can you post slightly bigger pic?

Edited my post and cropped the images so you can see it better

[hersounds]

Fezzik

I think is that much vcore try to slow down!

[Fezzik]

I actually got it down to 1.44 volts. I didnt have have my LLC cranked up. I think I'm going to try a different chip. I was pretty excited cause I got the exact same batch as DUMO, but another chip we go

[Dumo]

Got a couple 3226C840 from local Micro Center...testing now

[hersounds]

Waiting that Dumo

[SonDa5]

Got a couple 3226C840 from local Micro Center...testing now

Cool. My local MC in Tustin, California is all out of stock and I'm expecting a new batch soon. I am thinking about upgrading to new batch of 3770k from my early batch of 3570k.

[SonDa5]

Found a sweet spot for 24/7 5ghz.

Ambient Temps 24C
RAM 2133mhz CL 9-11-10-27 1T @1.5v
3570k@5ghz with 1.376v


http://valid.canardpc.com/2585171




Coud not have been possible without delidding.

[NoX]

Batch#: 3226C190 with Noctua DH-14
1.216 V

[Fezzik]

Well I delidded my 3rd 3770k now. A 3226. I got it stable at 1.44 volts at 5ghz but I can only run my G.skill 2400 ram at 1800 and only 16gb instead of the 32. Any ideas on to help get the 32 going. If I have all 32 in I wont even post I get a asus MB code of 55 which means no ram installed.

[Alex-Ro]

Up vccio and sa...

[hersounds]

..but don't go more that 1.30 VCCSA / VCCIO if you don't want faster degradation

[Fezzik]

Here are my voltages.
BCLK FReq 100.1
CPU VOLTS 1.45
DDR Volts 1.665
VCCSA =1.2
VCCIO 1.225
PLL 1.85
PCH 1.20625
VTTDDR 0.85625
2nd VICCIO 1.2250

[Fezzik]

well i increassed vccsa and IO to 1.3 and still no go. Not worried about speed as long as at 1600 but would like to use all 32 gigs. Any other suggestions?