Does anyone know what IC's have these memorys?

**xdan** · 03-14-2012, 02:23 AM

If someone know what IC's have these memory can please tell me

I want to buy a kit and i don't know which are better.

OCZ Blade ST 4GB (2x2GB) DDR3 1600MHz OCZ3BST1600LV4GK
CL 7-8-8-26 (CAS-TRCD-TRP-TRAS)
1.65v
Qualifed on Intel P55 Chipsets and Core i3, i5, i7 CPUs
Qualified on AMD 7 Series and 8 Series Chipsets, X4/X6 CPUs
Product page: http://www.ocztechnology.com/ocz-ddr...l-channel.html

OCZ Reaper 4GB (2x2GB) DDR3 1600MHz OCZ3RPR1600C8LV4GK
CL 8-8-8-24 (CAS-TRCD-TRP-TRAS)
1.65v
Qualified on Intel P55 Chipsets and Core i3, i5, i7 CPUs
Qualified on AMD 7 Series and 8 Series Chipsets, X4/X6 CPUs
Product page: http://www.ocztechnology.com/ocz-ddr...l-channel.html

They are BBSE?

Also did anyone tested
Tanscend aXeRAM 4GB (2x2GB) 2400 MHz TX2400KLU-4GK
CL 10-12-11-28, 1.65v
http://www.transcend-info.com/Products/MEMList.asp?srhMemWay=STD&L0No=Transcend&axn=goSea rch&LangNo=0&L4No=110
Can they go above 2400?

**Farmer Boe** · 03-14-2012, 06:38 AM

The OCZ Blade ST kit sounds like it could have D9 ic's. I have an older mushkin blackline kit with similar timings and it is D9.

**XII** · 03-14-2012, 08:15 AM

My old Reapers were Samsung HCF0, as were my Platinums.
775 was the validation back then.

**Don_Dan** · 03-14-2012, 02:09 PM

I can only speculate but here we go: First one is probably some kind of PSC, might be Micron as someone said too, second most likely Micron and the third kit is Hynix BFR. Honestly none of these kits is really great, can't you get something else?

**xdan** · 03-14-2012, 02:23 PM

Well these kits are new stuff in a store in my country and i thought they might be some "good stuff" some good memory which didn't sold in other countrys. The 2400kit i knew what chips are but can they go much above 2400?
In Romania is a little harder to find good memory in stores.
Anyway i think i will buy some Avexir 2000CL9 BBSE second hand kit which can do at least 2200CL 9-9 1.65v and some guy tested on SB-E and says it can do 2400 CL11-11-... 1.70V quad channel.

Thank you all for answers.

**Don_Dan** · 03-14-2012, 03:24 PM

I don't like any of these kits.

The Transcend might be able to do 1250-1300MHz at 11-12-12, but it depends on the IMC a lot, and 1200MHz 10-12-11 is a rather bad bin. In your case I'd definitely go for the BBSE kit, they scream on SB, you should be able to to 1100MHz 8-9-8 or 7-9-7 @ ~1.65V.