So after mulling over my water cooling choices I have settled on a internal build with my thinner Koolance Radiators. This is a recycle build with a majority of my parts were taken from my last water cooling rig, may you rot in hell GTX 295 failures :|. Anywho check the list of parts.
Case: Cosmos II (should have got the NZXT Switch 810, but meh)
Motherboard: Asus Crosshair V Formula
Memory: 16GB (4GBx4sticks) 1600 DDR3 Corsair Dominator
CPU: AMD Phenom II X4 965 Quad Core (may look at 8core in the future, but for now the Quad works just fine)
Hard Drive 1: Corsair P128 SSD
Hard Drive 2: Western Digital 300GB Velociraptor
Hard Drive 3: Western Digital 300GB Velociraptor
Hard Drive 4: Samsung 500GB HDD
Hard Drive 5: Western Digital 1.5TB Cavalier Green
Video Card: Sapphire AMD HD 7970 (reference board)
Optical: Random SATA DVD Burner
Power Supply: Enermax 1050Watt
Water Cooling Parts:
CPU Waterblock: Koolance CPU-360 (lets hope it passes its leak check when I go buy some distilled water from the store this week, I just reassembled after a long cleaning)
GPU Waterblock: Koolance VID-AR797 (will order Thursday)
Radiator 1: Koolance 360 Copper 30FPI Radiator (needs to be cleaned, painted, and leak tested)
Radiator 2: Koolance 240 Copper 30FPI Radiator (needs to be cleaned, painted, and leak tested)
Pump: Koolance 450 w/ pump top
Reservoir: EK 140 Multi
Fans: Varied
Fittings: 13mm compressions, varied
Fluid: Clear Koolance Fluid (will order Thursday)
Tubing: 13mm blue Koolance tubing (will order Thursday)
CPU>drain vent>Reservoir>240 rad>pump>GPU>360>CPU
Well you have seen the parts so here are some pictures of the set up and the parts I have atm.
Other fans are not pictured XD
Salamander Company Champion request the radiator be clensed of taint
Clean wiring
Mmmm clean wiring
360 will go right here *points*
one of the delta fans might go here at the exhaust
240 radiator with two delta fans will hang out in the basement, along with the pump.
No cutting or hacking or modding is planned.
Bookmarks