Asus Deluxe Glass And Elegance

**Corsaronero333** · 03-10-2012, 04:34 AM

Do not expect a 100-page 3D, here everything is reduced, we are talking about integrating an ASUS MiniMax DeLuxe:
330CPU Atom onboard, NV ION, FSB533, 1xPCIex16, Dual-CH DDR31066, SATA 3Gb / s, WiFi 802.11b/g/n, Bluetooth, RCA, S / PDIFOptical, 10xUSB 2.0, Gb LAN, onboard DC, Windows 7 Ready Home theater Gate, R / C.
To start, I'll post photos of matrices which then serve as a template to be executed by Venetian glassmakers, the materials used in this integration, ranging from stainless steel, glass etc for bases.
Good vision and above all good MODDING

Wood and shapes:

**Corsaronero333** · 03-10-2012, 04:35 AM

To put everything together I will use 'of M5 threaded rod with washers normal and increased to reduce the movement of the steel columns

This post will serve me covered 'for all columns of satin stainless

Above you can see the columns still unfinished satin

**Corsaronero333** · 03-10-2012, 04:41 AM

Author of glasses, but you

**Corsaronero333** · 03-10-2012, 04:42 AM

Home sweet home, in this case, laboratory, I just hope I'm not making too much noise or 'makes fun of me running

**Corsaronero333** · 03-10-2012, 04:42 AM

hardware

**Corsaronero333** · 03-10-2012, 04:42 AM

processing:
So to begin today for the first time I opened the Dremel 4000, and immediately took me under cutting the threaded rod M5, precise and stable.
I put the threadlock to continue strong into the nut underneath the foot, to avoid unwanted unscrewing it

**Corsaronero333** · 03-10-2012, 04:43 AM

lighting Effects

**Corsaronero333** · 03-10-2012, 04:43 AM

Processing facility for fans 3 x 40mm brushed stainless steel

**Corsaronero333** · 03-10-2012, 04:43 AM

Windy, wet, rainy, perfect for modding .....
This morning I got the bracket grossare reggiventole, the job was a bit 'hard but I finally paid off in full, but still lacks a satin finish for that any time'.

**Corsaronero333** · 03-10-2012, 04:44 AM

Sleeving for 40mm fans

final result

**Corsaronero333** · 03-10-2012, 04:44 AM

SSD support plate
the plate in question is well-5mm, so I avoid hahahahah cut, the rough was the first to be marked, drilled and rounded in the final, all hand

**Corsaronero333** · 03-10-2012, 04:45 AM

overview

**Corsaronero333** · 03-10-2012, 04:45 AM

Let's say that we are well and that I miss the power wiring to be completed as

**Corsaronero333** · 03-10-2012, 04:46 AM

wind chill ....... I am brought in an apartment above a little 'boxes of glass blocks, cut your gonnini I began to overlap, I stopped after 11 layers as the atezza is already' more 'than ample, in the hole that was created in ventuto center, near the bottom I placed a beautiful blue LED spotlight ... results sublime, pity only that the photos will not reveal the beauty of light that is transmitted into the glass.
Connected to the TV with HDMI cable the show continued into the screen, what about happy
Now just find it a bit 'of time with the other windows I try to do a multi-style tower, if I see that is satisfactory posterior' of new pictures, I take this opportunity to make even the best wishes to all

**Corsaronero333** · 03-10-2012, 04:46 AM

roundup of photos

**Corsaronero333** · 03-10-2012, 04:46 AM

For the final I was able to recall memories that are perfectly in tune with the mod, most of the bands colored blue, try a lot, and after not even notice it available by a famous Italian shop, mea culpa mea culpa

Corsair memory Vengeance 1600MHz color identical to that of the dissipators dell'Asus.
To complete the work I have also changed with an OCZ Vertex 2 SSD 100gb

**ZenEffect** · 03-10-2012, 01:17 PM

that thing needs a nice tube amp on top.

**runmc** · 03-10-2012, 07:12 PM

very creative - very nice

**Corsaronero333** · 03-11-2012, 03:01 AM

thanks guys

And here's the first beta of the banquet, missing all the accessories to be, more 'to integrate a liquid cooling system.
The EVGA Classified is only for demonstration purposes, the mod will be 'introduced the Gigabyte G1. Sniper2