[Mcrey Project] The Danger Blue Desk

[mcrey]

After my last build The Danger Blue Project as a noob, now i came with somthing mor compleks!! Inspired from what i see and learn from overclock.ne forum and others forum about Case modding and water cooling mooding... Now I present my 2nd Project....biggrin.gif
McRey DESK



Case
MCREY DESK

Hardware
CPU: Intel Core i7-3770K ivy bridge
Mbd: ASUS P8Z77-V DELUXE
Mem: Corsair DDR3 XMS3 Dominator PC12800 16GB Kit - CMP8GX3M2A1600C9 (4x4Gb)
GPU: Zotac Geforce GT 670 2048MB DDR5
PSU: Seasonic X750 750W Full Modular - Gold
SSD: Intel SSD 120GB 520 Series
HDD: Western Digital 1TB SATA3 64MB - Caviar Black


Water Cooling part planning:
Water Block cpu :EK-Supremacy - Nickel, - CSQ (the nickle top will chenged with TOP Plexi - Supremacy Clean CSQ)
Water Block gpu :EK-FC670 GTX - Nickel + EK-FC670 GTX Backplate - Black
Water Block ram :EK-RAM Dominator X4 - Nickel CSQ (the top will chenged with TOP Plexi - RAM Monarch X4 Clean CSQ)
pump : Laing D5 Vario 12V DC Pump (MCP 655) Strong 37 watt (planing to use dual pump, but still count my budget..biggrin.gif)
reservoir :EK-BAY SPIN Reservoir - Acetal CSQ ( Planing to changed it with two EK-RES X3 110 white)
Radiator :Magicool 180 Slim Radiator - single 180/35mm Thick

Fitting :
-Rigid Revolver Compression Fitting 3/8" x 1/2" Diamond Knurled 4 Pack - Nickel Plated Brass - Silver
-Enzotech Rotary Fitting G 1/4 Thread - Male to Male
-Bitspower Crystal T-Block - 180 Degree Water Cooling Accessory
-Bitspower Crystal L-Block


Tubbing : PrimoChill 1/2in Rigid Acrylic Tubing - 24in - Clear + 1/2in stainless steel pipe

Other Accesories
-Akust Rustless Screw #6-32 x 6.35
-Akust Rustless Screw M3x25
-Akust Rustless Screw M4x12
-ModMyToys 4-Pin Power Distribution PCB - 8-Way Block
-XSPC LCD Temperature Sensor V2 - Blue/White
-XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

For fan plan, is positive air pressure, which i use :
Fans for radiator Exhaust:
-SilverStone (SST-AP181) 180 mm 130 cfm at 1200rpm 2 unit

Intake (Intake fans total 220 CFM)
-Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED 148.72 CFM 2 unit
-Xigmatek XLF-F2006 20CM White LED, 3-pin (Blue Blades) 76 CFM, 1 unit


This is The Mcrey Desk Sketch



Sponsored by:
.....????

[mcrey]

reserved

[mcrey]

Already make my 1st shopping for this project
And this is the list of my shooping:
3 x FilterRight? 200mm Aluminum Fan Filter (Cooler Master HAF and 840 Cases) - Clear
2 x Mod/Smart Pre-Wired Vandal Switch Cable Assembly (Spade-Style) - Momentary
- Cable: Stock Cable
- Sleeve Color: Black
- Heatshrink Color: Black
1 x Vandal Resistant Illuminated Switch 16mm - Blue Ring
- Vandal Switch Style: Momentary Switch Style (ie. Power & Reset)
1 x Vandal Resistant Illuminated Switch 16mm - Blue Dot
- Vandal Switch Style: Momentary Switch Style (ie. Power & Reset)
1 x *** NEW *** Phobya Rectangular Toggle Switch - Black with Blue LED - Unipolar
6 x Hard Disk Drive Anti-Vibration Screws - 4 Pack
1 x Ultra All Purpose Computer Assembly Screws
1 x Phobya SATA Power Y-cable SATA Socket to 2x SATA Plug 15cm - UV Reactive Blue
3 x Enzotech Rotary Fitting G 1/4 Thread - Male to Male
3 x Monsoon G1/4 Premium Silicone O-Ring 10 Pack - UV White
2 x *** NEW *** Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED
3 x Rigid Revolver Compression Fitting 3/8" x 1/2" Straight Knurled 4 Pack - Nickel Plate Brass - Silver
1 x FilterRight? 140mm Aluminum Fan Filter - Clear
1 x Bitspower Replacement Blade for Bitspower Flow Indicator - Blue
1 x *** NEW *** XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

Still a lot of things to do

This is the final plan

[mcrey]

My other part from Performance-pcs has arrived



-Hard Disk Drive Anti-Vibration Screws - 4 Pack

-XSPC LCD Temperature Sensor V2 - Blue/White + G1/4 Plug Sensor

-Rigid Revolver Compression Fitting 3/8" x 1/2" Straight Knurled 4 Pack - Nickel Plate Brass - Silver

-FilterRight™ 200mm and 140mm Aluminum Fan Filter (Cooler Master HAF and 840 Cases) - Clear

-Bit Fenix Spectre Pro All-White LED Fan Series - 200mm - Blue LED

-Vandal Resistant Illuminated Switch 16mm - Blue Ring

-Vandal Resistant Illuminated Switch 16mm - Blue Dot

-Ultra All Purpose Computer Assembly Screws

-Phobya SATA Power Y-cable SATA Socket to 2x SATA Plug 15cm - UV Reactive Blue

-Enzotech Rotary Fitting G 1/4 Thread - Male to Male

-Monsoon G1/4 Premium Silicone O-Ring 10 Pack - UV White

-Bitspower Replacement Blade for Bitspower Flow Indicator - Blue

-Mod/Smart Pre-Wired Vandal Switch Cable Assembly (Spade-Style) - Momentary

-Phobya Rectangular Toggle Switch - Black with Blue LED - Unipolar

[mcrey]

Oh no... my work over loaded! I can even check my stainles steel desk is finished or not!! I must held my project until mid descember!!! My frozen cpu order just arrived yesterday

[alpha0ne]

subbed

[kuroikenshi]

I like the looks of this!!
keep em coming

[mcrey]

subbed

Thanks ! but still got a lot of stress!! Coz until now my table is not finished yet from the workshop! And now all my new wc part and case part already arrived, but i just can look it without do anything!!

I like the looks of this!!
keep em coming

Thanks bro. hope my table will ready soon!

[mcrey]

Finally my Table almost finished!!
The Stainlees steel part already done

[mcrey]

My desk front panel was arrived.....and its little bit disaponted coz they cut it manually and its not to good in the edge.


..... I try looking for solution here...... and i found it... i use stainless steel L plate to cover around it so the bad edge will disapear and i have place to srew it to the table
and still working it today


Still lot work to do......

[mcrey]

Today... work on the Side panel for 200mm Fan!!
Got little bit tired using a grinder to cut it so i make some modif n turn my grinder to be a table grinder
Start work since morning n just finished it
N here is the result...