Nice results there barr3l, still waiting my kit, should arrive anytime... Regards.
Nice results there barr3l, still waiting my kit, should arrive anytime... Regards.
I'm still trying to get the Tactical elite 1866 8GB work @2133 on 2600K.
I don't see tRC on P67. Could it be something else for P67?
I tried 9-9-9-27, 9-9-9-28, 9-10-9-27, 9-10-10-28, 9-11-11-28 but still getting BSOD during memtest.
Well you are the second person having troubles to get them to work on P67. I may be the 3rd. Did you boost the voltage to 1.65 to go for 2133?
I got the 4 sticks of 1600's this weekend and they run at 9-10-9-27 2T @ 1866 @ 1.65v no problem....
Running Asus z68 pro with 2600K
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
They didn't arrive yet, I always have to wait a lot from my USA shippings, no less than 2 weeks unless I pay 50 o 60 bucks for express mail. Maybe someone @ Crucial site can tell us what's wrong with them @ SB...
**EDIT @ 02/23 the kit arrived. Hope to have some luck...
Last edited by FedericoUY; 02-23-2012 at 05:57 AM.
Got a guy in local forum. He can do 2133/9-9-9 1.64v with 2500K on Gigabyte Z68 UD5.
Here's his screenshot.
I wonder if it has anything to do with P67 and Z68.
trfc refresh cycle time, try to relax that and use 2T, 1,645v it's good
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
This modules are awesome! 2133 9-9-9-27 1t @ 1.6125v :
Will test them in other speeds and more time, but seems totally stable around those values. Also was able to go into windows @ 1866 8-8-8 @ 1.55v but don't know stability because had no time. Will keep testing the next days. Definetly a great kit for SB!!!!
Got also the fan for free!
Sorry the bad quality of the pictures! Regards!
What motherboard are you using with the Crucial FedericoUY?
Yeah I failed on P67 @ 1866 and 2133 also...
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
AFAIK, you can't adjust tRC on Intel SB.
I've just adjusted primary values for them (Cl-trcd-trp-tras and of course CR). Maybe you can post a MemTweakIt screen and we can compare secondary timings and tertiary timings to check no timings are out of value/support on your mobo...
Last edited by FedericoUY; 02-23-2012 at 09:13 PM.
@Federico
for the results seems that you where lucky on the crucial, i know that MIVE ups memory like a beast my mushkin same as yours 16GB went up to 2250 9-11-10-28 not touching a volt and pushing bclk, my current patriots do the same
maybe its the MIVE ? or just that u got a nice batch, im thinking of getting those to try cauz 2133 9 flat timmings seems awesome
i tried the 16GB samsungs 2400 CL11 but not very nice for MIVE best i can do its 2133 9-10-10-28 1T at 1,65 and they are 1,35 lol
cheers
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Intel i5 2550k @ 4.5
Asus P8Z68-V Pro/Gen 3
MSI 7950 Twin Frozr III 1050/1450
Crucial Elite (4x4GB) 16GB 1866
Crucial M4 512GB
Seagate 7200.12 1TB HD
CNPS11X Extreme Cooler
Seasonic Platinum 860W
Lian-Li PC-B25FWB/ Lian-Li PT-FN04 Fan Controller
Plextor PX-L890SA
Samsung S27A950D 120Hz
Windows 8 RTM 64-bit
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
2x4GB Crucial Ballistix Tactical
From the initial test they didn't like CR=1T. These setting on the screen required some work to be stable, messed with the drive strengths as well.
Probably could tighten some of the subtimings even more. Anything below tRFC=160ns was no boot. Managed to run tRC = 11, but it was not stable enough.
Unfortunately I can't test them neither on different platform, nor on Bulldozer. I'm waiting for a bios chip to arrive. Until then I won't be able to test them on anything different than Thuban/Deneb.
Still pretty decent for 4GB modules. Tried to remove the heatspreader, but was afraid of ripping off some of the chips, so I gave up.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
They didn't like 1T since which frequency? They are anyway far better than decent imho, especially on Thuban+890FX.
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Don't know. I shoot for 2000 directly .
Well, I can load Windows with 1T same settings and the mems look stable, but memtest fails at 2-3%. Tried VDIMM up to 1.7V without any difference.
I agree, they aren't only decent, they are actually great. Could expect to clock better on Bulldozer.
The strangest thing I see is something like burn-in process. First I tried 1T, but failed. Then moved to 2T - fail. Adjusted tRC but they randomly failed in the first 4-5%.
Went back to Memtest for DOS trying to stabilize the same settings and it suddenly worked. Got back into windows, needed to adjust voltage a little, but got stable at 1.65V.
Last edited by I.nfraR.ed; 02-26-2012 at 06:12 AM.
X6 1090T (1010MPMW) @ 4267MHz 1.44V NB@3229MHz 1.33V | Asus Crosshair IV Formula | 2x2GB Corsair Dominator GTX2 @ 1845MHz 6-6-5-17-22 1T | Asus HD4890 @ 1050/4800 | Corsair HX850W | HAF 932
EK Supreme HF | EK-FC4890LT | MCP655 + Koolance D5 Top | ThermoChill PA120.3 + 3x Enermax Magma | XSPC Bay res | Masterkleer 1/2" UV Red
Yes.
I love the mushkins, they are amazing, in this platform I could achieve 2300mhz as I showed before also with 1.65v, but willing to test them on X58 (monday), or P55 (must find any) to go for 2400. I know for sure they can do it.
Last edited by FedericoUY; 02-26-2012 at 09:55 AM.
This Crucials keeps amazing me. They are extremely flexible and sensitive with voltage (as somebody said before, and voltage upgrade will be sensed by the kit, it's unbelievable).
Managed to get 2000 8-8-8-24 1t, just didn't check for stability because it's not a speed that I'll use anytime:
But here comes the best part, they were able to go into windows @ 2133 8-8-8-26 1t @ 1.75v and play with aida bench:
Amazing kit. I have them @ 2133 9-9-9-27 @ 1.618xx rock solid. Couldn't be happier. Cheers all.
**EDIT: Will try them @ higher speeds.
Last edited by FedericoUY; 02-26-2012 at 09:02 AM.
Bookmarks